• EOL

Motor with 250:1 Gear - Pololu 1095

Index: PLL-00717

A miniature high-power motor from Pololu with a 250: 1 gear, has 50 rpm, the torque is 2.3 kg * cm (0.225 Nm).

Motor with 250:1 Gear - Pololu 1095
€14.00
€11.38 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu

Attention!

The sale of the product has been completed. Check out the others inthis category.

Pololu 250 motor specification: 1

Supply voltage:

3 May - 9 May

No-load current (6V):

40 mA

Current with the shaft stopped (6 V):

360 mA

No load speed (6V):

50 rpm

Torque (6V):

2.3 kg * cm (0.225 Nm)

Gear ratio:

250: 1

Shaft Diameter:

3 mm

Body dimensions:

24 x 10 x 12 mm

Mass:

10 g

Double-sided shaft:

NO

Product Description: Pololu 250 Motor: 1

Small, light and powerful Pololu engines are used by robot constructors as drive units. The devices can bepowered with voltages up to 9 V, and useful power over 3 V. The optimal voltage with the best power to endurance ratio is 6 V.

Motor dimensions:

The motor body is a cuboid with dimensions of 24 x 10 x 12 mm. The gearbox is 9.27 mm long. There is a 3mm D-shaped shaft at the exit. The total weight is approximately 10g.

The figure shows the dimensions of the Pololu micro motor with gear.

Accessories

We offer a number of accessories that work with Pololu micro motors:

For 1000: 1 and 1000: 1 HP micro motors, the mounts do not cover the entire gearbox.

   

The store also offers many otherengines.

Compact but powerful 250: 1 motor

250: 1 motor - Pololu 1095 is a small but very efficient component that can be used in many electronic projects. The device has a gear of 250: 1 and has a rotational speed of up to 50 revolutions per minute. The current consumption without load is 40 mA.

The engine weighs only 10 g (with dimensions of 24 x 10 x 12 mm), so it can be used in projects where space saving is an important factor - for example in drones, mobile robots, remote-controlled vehicles or small electronic devices.

High quality and precise workmanship

Pololu motors are considered to be one of the best devices of this type available on the market. Users of electronic components of this American brand praise them, among others, for their careful workmanship, reliable operation, durability and easy assembly in the final position.

You can control the motor using a special module that supplies direct current with appropriate parameters. You will find a wide selection of engine controllers, mounting elements and other accessories from this category at the most attractive prices in other sections of our store.

Diameter 12 mm
Length 24 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - current 250 mA
Motor - gear 250:1
Rotation speed 50 obr/min
Torque 2,25 kg*cm
Mass 10 g
Motor - shaft 3 mm
Voltage nominal 6.0 V
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: