Over 10 years

professional experience

Easy returns

up to 30 days

Over 100 000 customers

over 600 000 orders

Fast shipping

all across the UE

Order in 10:22:58 and we will ship today!

Wishlist

Motor with 298:1 Gear - doublesided shaft - Pololu - 2208

Index: PLL-00718

Ask a question

Remove from wishlist Add to wishlist

A miniature high-power engine by Pololu with a gearbox of 298: 1, has 45 rpm, the torque is 2.9 kg * cm (0.284 Nm). It has an extended shaft that allows the installation of speed sensors.

Notify me when available

Manufacturer: Pololu

298: 1 motor specification

Supply voltage:	3 May - 9 May
No-load current (6V):	30 mA
Current with the shaft stopped (6 V):	360 mA
No load speed (6V):	45 rpm
Torque (6V):	2.9 kg * cm (0.284 Nm)
Gear ratio:	298: 1
Shaft Diameter:	3 mm
Body dimensions:	24 x 10 x 12 mm
Mass:	10 g
Double-sided shaft:	YES

Product description: Pololu 298 motor: 1 double-sided shaft

Small, light and powerful Pololu engines are used by robot constructors as drive units. The devices can be supplied with voltages up to 9 V, and useful power over 3 V. The optimal voltage with the best power-to-strength ratio is 6 V. This version has an extended shaft with a length of 4.5 mm, enabling the installation of speed sensors -encoders.

Motor dimensions:

The motor body is a cuboid with dimensions of 24 x 10 x 12 mm. The gearbox is 9.27 mm long. There is a 3mm D-shaped shaft at the exit. The total weight is approximately 10g.

The figure shows the dimensions of the Pololu micro motor with gear.

Accessories

We offer a number of accessories that work with Pololu micro motors:

Fasteners
Special whiteorblackmounts have been designed for mounting the motors.An extendedversion is also available, and it is made ofaluminumwith increased strength.

For 1000: 1 and 1000: 1 HP micro motors, the mounts do not cover the entire gearbox.

Wheels,tracks,hubs,encoders
Our offer also includeswheelsandtracks, adapted to the shafts of Pololu micro motors. There is also a special version of the wheels with speed measuring -encoders. Atypical wheel assembly easieradapter.

Engine drivers
Control of the direction and speed of rotation is possible thanks to the drivers of DC motors. The offerincludes both integrated circuitsfor self-soldering as well as ready-to-connectmodules cooperating with sets (eg Arduino).

The store also offers many otherengines.

Useful links

Manufacturer's website - Pololu # 2208

Diameter	12 mm
Length	24 mm
Voltage to	3.0 V
Voltage from	9.0 V
Motor - current	30 mA
Motor - gear	298:1
Rotation speed	45 obr/min
Torque	2.9 kg*cm
Mass	10 g
Motor - shaft	3 mm
Motor - 2x shaft	yes
Voltage nominal	6.0 V

Same-day shipping

Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.

All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.

You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia

Delivery time: 2-4 days
Delivery cost: from 4.18 EUR
Insurance: 1200 EUR

GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

Delivery time: 2-5 days
Delivery cost: from 5.35 EUR
Insurance: 1200 EUR

GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden

Delivery time: 2-7 days
Delivery cost: from 7.67 EUR
Insurance: 1200 EUR

Payment methods

PayPal

Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

PayU

Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Wheels 32x7mm - black - 2pcs - Pololu 1087

Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.

Index: PLL-00012

Index: PLL-00012

Mount for Pololu micro motors long - white - 2pcs.

Extended micro motor mount - white - 2pcs - Pololu 1089

Extended mounts for the Pololu micro motors. The price is for the two pieces.

Index: PLL-00019

Index: PLL-00019

Wheel 60x8mm - black - 2pcs. - Pololu 1420

Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.

Index: PLL-00022

Index: PLL-00022

Polol TB6612FNG - dual channel 13.5V/1A motor controller

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...

Index: PLL-00032

Index: PLL-00032

Fixtures for Polol micro motors - black - 2pcs.

Micro Motor Mount - black - 2pcs. - Pololu 989

Black Polol micro motor mounts in black. Price for two pieces.

Index: PLL-00036

Index: PLL-00036

Pololu 1415 - set of track wheels 22T

The set includes two pieces of caterpillar belts with 22 teeth each, two drive wheels and two loose-running wheels and their attachment components.

Index: PLL-00150

Index: PLL-00150

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).

Index: PLL-00456

Index: PLL-00456

TB6612FNG - two-channel motor controller

Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.

Index: UCC-00495

Index: UCC-00495

Vibration Motor 10 x 3,4 mm - Pololu 1636

A small motor that generates vibrations with an amplitude of 0.75 g. It consumes approximately 60mA of current when powered with 3V.

Index: PLL-00589

Index: PLL-00589

Stepper motor SY35ST26-0284A 200 steps / rev 2.7V 1.0A 0.14Nm

Stepper Motor SY35ST36-1004A 200 steps 2.7V 1.0A 0.14Nm - Pololu 1209

Bipolar stepper motor 200 steps (1.8 degrees) supplied with a voltage of 2.7V with a current consumption of 1000 mA per coil, the torque holding 1.4 kg * cm (0.14 Nm)...

Index: PLL-00758

Index: PLL-00758

Pololu Micro Motor Mount - aluminium - 2pcs.

Aluminum mount to Pololu micromotors with the improved strength. The price is for the two pieces.

Index: MEH-00849

Index: MEH-00849

Reduced price
On sale

Set of resistors CF THT 1/4W - 200pcs

The set of 10 values of through hole resistor of 0,25 W with tolerance of 5 %, 20 pieces of each. To facilitate the search of the corresponding value, each of them is in a...

Index: PAS-01268

Index: PAS-01268

Set of 5mm LED - 30pcs.

Set of 10 pieces of diode, green, yellow and red.

Index: LED-01447

Index: LED-01447

Set of 3mm LEDs - 30pcs

Set of 10 pieces of green, yellow and red diodes.

Index: LED-01448

Index: LED-01448

Breadboard - 170 holes white

Breadboard is used for creating and testing electronic circuits in color white.

Index: PLY-00605

Index: PLY-00605

Arduino Leonardo - module A000057

Popular module with AVR microcontroller Atmega32U4. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of which 7 can be used as PWM channels and 12 as analog...

Index: ARD-01213

Index: ARD-01213

Arduino Ethernet Shield with SD card reader

Arduino Ethernet Shield with microSD card reader

A module that allows Arduino users to easily connect to the Ethernet network. It also has a microSD card reader.

Index: ARD-01217

Index: ARD-01217

Step-Down Voltage Regulator D24V3F12 - 12V 0,3A - Pololu 2100

Step-down converter with 12 V output voltage. Maximum current up to 300 mA. Supply voltage in the range 14 V - 42 V.

Index: PLL-01351

Index: PLL-01351

SparkFun Proto Shield Kit

A set of basic electronic elements along with a universal board which is suited to the connectors of Arduino. A kit for self-assembly.

Index: SPF-01768

Index: SPF-01768

Extended micro motor mount - white - 2pcs - Pololu 1089

Extended mounts for the Pololu micro motors. The price is for the two pieces.

Index: PLL-00019

Index: PLL-00019

Motor with 1000:1 Gear - Pololu 1596

A miniature motor from the low power series by Pololu with a 1000: 1 gearbox, has 14 rpm, the torque is 5.0 kg * cm (0.490 Nm).

Index: PLL-00727

Index: PLL-00727

Micro metal gearmotor 298:1 45RPM - Pololu 1094

Polol's miniature low-power motor with 298:1 gearbox, 45 rpm, 2.9 kg*cm (0.284 Nm) torque.

Index: PLL-00117

Index: PLL-00117

Motor with 30:1 Gear - Pololu 993

A miniature motor from the low power series by Pololu with a gearbox of 30: 1, has 440 rpm, the torque is 0.28 kg * cm (0.027 Nm).

Index: PLL-00708

Index: PLL-00708

Micro motor DFRobot DC 6V with M4x55mm threaded shaft

Micro Metal DC Geared Motor with Lead Screw (6V 150RPM M4*55)

Small metal motor supplied with 6 volts and 55 mm long M4 threaded output shaft. The idling speed is approx. 150 rpm. Its dimensions are: 25 x 12 mm .

Index: DFR-06703

Index: DFR-06703

Motor with 30:1 Gear - doublesided shaft - Pololu 2202

A miniature motor from the Pololu low power series with a 30: 1 gearbox, has 440 rpm, the torque is 0.3 kg * cm (0.029 Nm). It has an extended shaft that allows the...

Index: PLL-00704

Index: PLL-00704

Motor with 50:1 Gear - Pololu 1098

A miniature motor from the low power series by Pololu with a 50: 1 gearbox, has 250 rpm, the torque is 0.5 kg * cm (0.049 Nm).

Index: PLL-00709

Index: PLL-00709

Motor with 100:1 Gear - Pololu 992

A miniature motor from the low power series by Pololu with a gearbox of 100: 1, has 120 rpm, the torque is 0.9 kg * cm (0.882 Nm).

Index: PLL-00706

Index: PLL-00706

Motor with 75:1 Gear - Pololu 2360

A miniature motor from the low power series by Pololu with a gearbox of 75: 1, has 170 rpm, the torque is 0.6 kg * cm (0.058 Nm).

Index: PLL-00712

Index: PLL-00712

Motor with 150:1 Gear - Pololu 1097

A miniature motor from the low power series by Pololu with a gearbox of 150: 1, has 85 rpm, the torque is 1.2 kg * cm (0.117 Nm).

Index: PLL-00714

Index: PLL-00714

Motor with 100:1 Gear - doublesided shaft - Pololu 2204

A miniature high-power motor by Pololu with a gearbox of 120: 1, has 120 rpm, the torque is 0.9 kg * cm (0.088 Nm). It has an extended shaft that allows the installation of...

Index: PLL-00713

Index: PLL-00713

Motor with 10:1 Gear - Pololu 1099

Miniature motor from the low power series from Pololu with a 5: 1 gearbox, has 1300 rpm, the torque is 0.14 kg * cm (0.013 Nm).

Index: PLL-00707

Index: PLL-00707

Motor with 50:1 Gear - doublesided shaft - Pololu 2203

A miniature motor from the low power series by Pololu with a 50: 1 gearbox, has 250 rpm, the torque is 0.5 kg * cm (0.049 Nm). It has an extended shaft that allows the...

Index: PLL-00710

Index: PLL-00710