• EOL

5:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft - Pololu 3082

Index: PLL-05988

Polol' s miniature high power engine with durable carbon brushes. It has a 5:1 transmission, speed is 6000 rpm, torque is 0.1 kg*cm (0.01 Nm). It has an extended shaft for mounting speed sensors.

5:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft - Pololu 3082
€16.50
€13.41 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Pololu

Attention!

The product has been discontinued. Check other products in category.

Product description: HPCB 5:1 6 V motor, double-sided shaft - Polol 3082

Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The units can be supplied with voltage up to 9 V, the useful power is above 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 5.0 mm, allowing the installation ofspeed sensors - encoders.

This version has carbon brushes with increased strength and a shaft on both sides for mountingthe encoders.

Motor dimensions

The motor body is a 26 x 12 x 10 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 9,5 g.

The drawing shows the dimensions of the Polol micro motor with gearbox.

Accessories

We offer a range of accessories that work with Polol's micro motors:

  • Mountings
    Special mountings in whiteorblack have been designed for mounting motors.There is also anextendedversion available and made ofaluminum withincreased strength.

  • Wheels,crawlers,hubs,encoders
    Our offer also includeswheelsand crawlers, matchedto the shafts of Polol's micro motors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated byadapters.

There are also many othermotorsin the shop's offer.

Specification

Power supply voltage:

3 V - 9 V

Unloaded current (6 V):

120 mA

Current at stopped shaft (6 V):

1600 mA

Speed without load (6 V):

6000 rpm

Torque (6 V):

0.1 kg*cm (0.01 Nm)

Gear ratio:

4:995:1

Brushes:

Carbon brushes, high strength

Shaft diameter:

3 mm

Body dimensions:

26 x 12 x 10 mm

The weight:

9,5 g

Two-sided shaft:

YES

Length 26 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - gear 5:1
Rotation speed 6000 obr/min
Torque 0.1 kg*cm
Mass 10 g
Motor - shaft 3 mm
Motor - 2x shaft yes
Voltage nominal 6.0 V
Package width 4 cm
Package height 1.4 cm
Package depth 1 cm
Package weight 0.0099 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: