DFRobot - dual digital potentiometer 100 kΩ

Index: DFR-10838 EAN: 6959420912810

The digital potentiometer is a type of mixed IC signal which is able to dynamically change the internal resistors via MCU. It can be used for applications such as dimming of the LEDs, a stable source of line voltage, the oscillator, the low pass filter or a differential amplifier. It has a resistance of 100 kΩ.

DFRobot - dual digital potentiometer 100 kΩ
€12.50
€10.16 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot

Description

The digital potentiometer is a type of mixed IC signal which is able to dynamically change the internal resistors via MCU. It can be used for applications such as dimming of the LEDs, a stable source of line voltage, the oscillator, the low pass filter or a differential amplifier. It has a resistance of 100 kΩ. The digital potentiometer can replace the traditional, analog one in many applications, it can be used, for example, to change the volume in audio devices such as a smart speaker, mobile phone and music player.

Connection

Thanks to the suitable draft of the circuit of the operational amplifier, a digital potentiometer can be used to dynamically adjust various key parameters of the circuit such as the dimming of the LED, an oscillator, and so on. It uses the built-in MCP42100 with two individual digital potentiometers of 100 POT0 and POT1. Each potentiometer has 256 steps with a resistor of 100. It supports supply voltage from 2.7 V to 5.5 V, compatible with MCU 3.3 V and 5 V.

DFRobot podwójny potencjometr cyfrowy

An example of wiring diagram with DFRduino Uno board.

Pins

The module communicates via SPI interface. The supply voltage ranges from 2.7 V to 5.5 V.

Podwójny cyfrowy potencjometr - wyprowadzenia

PIN Description
VCC Supply voltage from 2.7 V to 5.5 V.
GND Ground.
SI Serial output of data.
CS Chip Select.
CCS A serial clock output.
SO Serial input of data.
PAx Potentiometer terminal A (x=0,1).
ATS Potentiometer terminal B (x=0,1).
PWx Potentiometer wiper terminal (x=0,1).

Specification

  • Supply voltage: from 2.7 V to 5.5 V DC
  • Static current: 1µA
  • Resistance: 100 kΩ
  • Resolution: 8 B, 256 steps for each potentiometer
  • Number of potentiometers: 2
  • Interface: SPI
  • Working temperature: from -40℃ to 85
  • Dimensions: 20 x 18 mm

Package width 5.627 cm
Package height 6.125 cm
Package depth 2.633 cm
Package weight 0.013 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: