MPR121 - Gator Breakout touch sensor - 12-channel - capacitive
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - zdjęcie 1
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - zdjęcie 2
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - zdjęcie 3
MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - zdjęcie 4

MPR121 - Gator Breakout touch sensor - 12-channel - capacitive - STEMMA QT / Qwiic - Adafruit 4830

Index: ADA-19005
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com
The Gator Breakout sensor allows to detect touch. It is equipped with the MPR121 chip. Made in capacitive technology, it provides the user with 12 channels, which allow to obtain 12 independent measurements. To each channel individual touchpads and touch panels can be connected by means of crocodile cables. The module is compatible with popular Arduino microcontroller and derived boards, such as Metro board. It also works with Raspberry Pi. For communication it uses I2C bus with address 0x5A.
€8.78
€7.13 tax excl.

Available
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Product description: MPR121 - Gator Breakout touch sensor - 12 channel - capacitive - STEMMA QT / Qwiic - Adafruit 4830

Gator Breakout sensorenablestouch detectionIt is equipped withMPR121chip. Made with capacitive technology, it provides the user with 12 channels that allow for12 independent measurements. To each channel individual touchpads andtouch panelscan be connected by means ofcrocodile cables. The module is compatible with popular Arduino microcontroller and derived boards, such as Metro board. It also works with Raspberry Pi. For communication it usesI2Cbus with address 0x5A.

Product is compatible with Arduino

Detaileduser guideand technical documentation of theMPR121chip are available on the manufacturer's website.

Schemat podłączenia czujnika Gator Breakout z płytką Metro.

Connection diagram of Gator Breakout sensor with Metro board.Metro boardis not included in the set, you can buy it separately in our shop.

Gator Breakout sensor pinout description

Sensoris equipped withSTEMMA QT / Qwiicconnector which allows for quick and convenient connection of the element with the microcontroller module. The diagram on the picture beside shows how to connect Gator Breakout withMetroboard which is equivalent to popular Arduino board.

  • VIN - power supply pin with voltage from 3 V to 5 V DC.
  • GND - system ground.
  • SCL - I2C bus clock pin.
  • SDA - I2C bus data line pin.

Technical specification

  • Compatible with Arduino and Raspberry Pi
  • Chip: MPR121
  • Technology: Capacitive
  • Number of channels: 12
  • Communication interface: I2C
  • Interface address: 0x5A
  • Connectors: STEMMA QT / Qwiic
  • Dimensions: 51 x 25.2 x 4.5 mm

In our offer you will also find othersensorswhich will allow you to extend your project according to your individual needs and alsopaper touch sensorswhich may become an addition to the Gator Breakout.

12-kanałowy czujnik dotyku Gator Breakout wyprodukowany przez firmę Adafruit.
12-channel Gator Breakout touch sensor manufactured by Adafruit.

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Set of male connectors for Raspberry Pi Pico - 2x 1x20 and 1x3 raster 2,54mm

A set of male goldpin connectors with 2.54mm lead spacing . The set consists of two 1x20 and one 1x3 strips compatible with the GPIO connectors on the Raspberry Pi Pico ....
Index: RPI-18854
Index: RPI-18854
Available, 24 hours shipping!
(Check quantity)
Regular price €0.43 Price €0.43

Raspberry Pi Pico - RP2040 ARM Cortex M0+

A small Raspberry Pi Pico module with Raspberry 's own RP2040 microcontroller made in the UK. RP2040 is a dual core chip based on ARM Cortex M0+ clocked at 133 MHz. The...
Index: RPI-18767
Index: RPI-18767
Available, 24 hours shipping!
(Check quantity)
Regular price €4.48 Price €4.48

Products from the same category

Deflection sensor 73x6,3mm - SparkFun SEN-10264

During the bending, sensor increases its resistance. It can be used to detect hand movements, for example, crimping fists. Sensor length is 55 mm.
Index: SPF-01640
Index: SPF-01640
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.03 Price €11.03

HX711 - amplifier for a strainer beam - SparkFun SEN-13879

Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.7 V to 5.0 V, communicates via a two-wire bus: the data line and a...
Index: SPF-04283
Index: SPF-04283
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.61 Price €9.61

Force sensor FSR-406 - 2kg square 38mm - Pololu 1645

Force sensor changes its resistance when the force applied to the square tip, increases. The sensor in the form of a rectangle with side of 38 mm.
Index: PLL-01040
Index: PLL-01040
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.03 Price €13.03

Force sensor FSR-402 - 2kg round 18mm - Pololu 1696

The pressure sensor reduces its resistance as the force applied to the round tip increases. Round sensor with a diameter of 18 mm.
Index: PLL-00753
Index: PLL-00753
Available, shipping 24h!
(Check quantity)
Regular price €8.08 Price €8.08

Force sensor FSR-400 - 2kg round 5mm - Pololu 1695

The force sensor reduces its resistance when the force put to the round tip, accumulates. The sensor is round with a diameter of 5 mm.
Index: PLL-00752
Index: PLL-00752
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.40 Price €7.40

Piezoelectric membrane with wires - 20mm - SparkFun SEN-10293

The piezoelectric elements are useful for detecting the vibration or knocking. You can use them in a simple way by reading the voltage at the output. It can also be used for...
Index: SPF-11152
Index: SPF-11152
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.56 Price €1.56

The conductive membrane for measuring the pressure of the force - Adafruit 1361

The membrane is made of a conductive material. The pressure, at any point, changes the resistance, which leads to the measurable change of the voltage in a simple way. The...
Index: ADA-05014
Index: ADA-05014
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.60 Price €5.60

Load cell strain gauge 50kg

The pressure sensor reduces its resistance when the force put to the square tip, increases.   The sensor in the form of a rectangle with the side of 34 mm. For the operation...
Index: MOD-09446
Index: MOD-09446
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.24 Price €1.24

Force sensor round 5mm (0.25 '') - short connector - Pololu 2727

Pressure sensor reduces its resistance when the force put to the round tip, increases. The sensor with the short connector, round, with about 5 mm diameter.
Index: PLL-02349
Index: PLL-02349
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.40 Price €7.40

Force sensor round 15mm - short connector - Pololu 2728

Pressure sensor reduces its resistance when the force put to the round tip, increases. The s ensor with the short connector, round, with about 15mm diameter.
Index: PLL-02348
Index: PLL-02348
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.30 Price €8.30

Tensometric beam NA27 5kg (50N)

Strain-gauge beam operating in the range of up to 5 kg (approx. 50 N). The smallest version is used, for example, in kitchen scales, portable scales. The...
Index: SES-03099
Index: SES-03099
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.48 Price €13.48

Pressure sensor cell 50kg - 4pcs.

Pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor is in the form of a rectangle with sides of 33 mm. The set has 4 pieces,...
Index: MOD-07267
Index: MOD-07267
No scheduled product deliveries
Regular price €8.98 Price €8.98