





Waterproof, analog sensor of high temperature operating in the range from -30 °C to 500 °C. The output is the resistance depending on temperature. The probe's length is 25 mm.
Characteristic of the PT100 sensor.
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
ST7735R - display TFT LCD 1,44'' 128x128px with microSD car reader - Adafruit 2088
1.44" TFT LCD graphic display with 128 x 128 px resolution and 18-bit colour depth. It works with 3.3 V and 5 V, communicates via SPI bus. Additionally, the board has a micro...Hexbug Nano - different colors
Nano insect-robot. Hexbug is a series of micro-robots that mimic living creatures. The toy resembles the behavior of real insects, it is smart too. It is able to omit...Temperature and humidity sensor DHT21 (AM2301) in case
Temperature and humidity sensor with a digital, single-wired interface. Measuring range: temperature -40 to 80 °C, humidity 0 to 100 % RH . Powered with voltage in the range...DFRobot Gravity - Non-contact IR Thermometer Sensor MLX90614
Non-contact temperature sensor. It is used for measurement of IR radiation and does not require the direct touch. It communicates through an I2C interface.Linear voltage regulator 5V L7805CV - THT TO220 - 5 pcs.
Stabilizer used to supply logic systems supplied with 5 V. The maximum output current is 1.5 A. The product is sold for 5 pieces.Diode LED 5mm RGB WS2811 addressed - 10pcs.
LED 5 mm RGB WS2811 with integrated control unit allows you to control the device via a 1-wire bus.Step-Down Voltage Regulator XL4015 - 1,3V-36V 5A
Module with XL4015 step-down pulse inverter. Input voltage from 3.3 V to 36 V. Maximum continuous output current 5 A. Output voltage adjustable from 1.3 V to 36 V.ON-OFF Switch PBS 11A, 250V/1A - black
Bistable switch with a round attachment with the contacts' loading capacity of 1 A for 250 V or 3 A for 125 V.Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...Nano v3.CH340 ATmega328 - compatible with Arduino
The module is compatible with the popular system Arduino Nano. It has 14 digital input/outputs, 6 PWM channels, 8 analog inputs and popular communication interfaces. It has a...Products from the same category
High temperatura probe PT1000 - 1kΩ 6x50mm metal braid
Waterproof, analog sensor of high temperature operating in the range from -30 °C to 500 °C. The output is the resistance depending on temperature. The probe's length is 50 mm.High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.High temperatura probe PT100 - 3x30mm with wires
Analog sensor of high temperature operating in the range from -200 °C to 450 °C. The output is the resistance depending on temperature. The probe's length is 30 mm.High temperatura probe PT100 - 100Ω 6x50mm metal braid
Waterproof, analog sensor of high temperature operating in the range from -30 °C to 500 °C. The output is the resistance depending on temperature. The probe's length is 50 mm.High temperatura probe PT100 - 7x50mm
Waterproof analogue sensor with the high temperature working in the range from -200 °C to 420 °C. The output is resistance dependent on temperature. Probe length is 50 mm.Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.High temperatura probe PT100 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 250 °C. The output is resistance dependent on temperature. Probe length is 50 mm.High temperatura probe PT100 - 3x30mm
Analog sensor of high temperature operating in the range from -50 °C to 150 °C. The output is the resistance depending on temperature. The probe's length is 30 mm.High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.PT100 RTD Temperature Sensor Amplifier - MAX31865 - Adafruit 3328
Amplifier of low resistance is designed to work with PT100 2, 3 and 4-wire temperature probes. It communicates via the SPI bus. It works with a voltage from 3 V to 5 V.