- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: ArduCam CMOS camera adapter board - for OmniVision image sensor - ArduCam B0012
Adapter produced by ArduCam company - one of the most popular manufacturer of high quality cameras. The board with adapter is dedicated to use with CMOS camerasfrom ArduCam. It supports among others 0.3 MP (OV7670, OV7725) or 1.3 MP (OV9650) cameras. Supply voltage is from 2.8 V to 3.3 V.
ArduCam CMOS camera adapter board - for OmniVision image sensor - ArduCam B0012.
Features of the adapter
- Adapter designed for use with ArduCam CMOS camera
- Supply voltage is from 2.8 V to 3.3 V
- 8-bit camera data bus RGB / YUV / Raw
- Adapter pin spacing is 2.54 mm
- Adapter can be used in MCU, ARM, CPLD, FPGA, DSP paltform
- Supports most OmniVision CMOS camera modules:
- 0.3 MP: OV7670, OV7725
- 1.3 MP: OV9650
- 2 MP: OV2640
- 3 MP: OV3640
- 5 MP: OV5642
Description of leads on board
- VCC - power supply pin from 2.8 V to 3.3 V
- GND - system ground
- SCL - I2C bus clock line
- SDA - I2C bus data line
- VSYNC - vertical synchronization pin
- HREF - horizontal reference pin
- PCLK - Pixel Clock pin
- XCLK - Master Clock pin
- D0...D7 - pins of the data line
- Y0...Y1 - pins LSB in 10-bit YUV mode
- Flash - pin optional Flash signal
- PWDN - ARD power inputs
Useful links |
