Waveshare touchscreen display, capacitive screen with a diagonal of 10.1 " and a resolution of 1024 x 600 px. To the display attached is the control plate HDMI, thanks to which the product is compatible with a variety of equipment and systems, including the Raspberry Pi. In the set, a special case for the Raspberry and the screen in black and white.
Connect to the Raspberry Pi
In order to run the screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. HDMI transmits the image, the USB port receives data of the touch interface. The screen must be connected to the driver using the included in set, tape, via the RGB slot - RGB. In case of the absence of the image on the screen, you must select the HDMI signal's source using the buttons of the controller.
Example of connecting the screen to the driver, which is included in the package.
- Screen type: touchscreen, capacitive
- Diagonal: 10,1 "
- Resolution: 1024 x 600 px
- Works in particular with Rasbperry Pi in version 4B, 3B+, 3B, 2B and B+ Zero without installation of drivers for the operating system Raspbian
- Can work as a monitor for any device with HDMI, VGA and AV output
- Menu in different languages
- Control of brightness, contrast, etc.
- Screen dimensions: 265 x 170 mm
- The case is made of acrylic
- Angle of view: 45 °
- Screen 10.1", touchscreen, capacitive
- The display driver
- A/C adapter
- HDMI cable
- The microUSB cable to connect the touch panel
- Transparent case
- Set of mounting parts