Product description: ADS1263 32-bit ADC - 10-channel - overlay for Raspberry Pi - Waveshare 18983
High precisionADC conver ter in the form of overlay for Raspberry Pi minicomputer, also compatible with Nvidia's Jetson Nano platform. Waveshare's ADC is powered by a high performance ADS1263 chip. The converter module has 10 input channels and its resolution is 32 bits. The maximum sampling rate is 38 kSPS.
A 10-channel ADC manufactured by Waveshare.The product iscompatible with Raspberry Pi
There is a Product Wiki Page available on the manufacturer's website. It contains a user guide as well as schematics and necessary software.
The layout of the components on the board.
Component layout
- GPIO connectors to connect to the Raspberry Pi
- Screw AD input, general purpose
- AD input, to connect peripheral devices and sensors
- Control input, allows control by other hosts
- Power configuration resistor
- RTD configuration resistor
- ADC ground configuration (COM-GND jumpers)
- Quartz crystal 7.3728 MHz
- Power section
- RTD section
- Input filtering
- ADS1263 chip
Pinout description
- 3V3 - 3.3 V supply pin
- 5V - 5V power supply pin
- GND - chip ground pin
- DRDY - ADS1263 data output pin (activated by low state)
- RESET - RESET pin
- CS - chip select (activated by low state)
- DIN - SPI bus data input pin
- DOUT - SPI bus data output pin
- SCK - SPI bus clock output pin
Description of individual pins of the module.
The maximum sampling rate is equal to 38 kSPS.
Technical specification of 10-channel ADC from Waveshare
- Module: ADC converter
- Chip: ADS1263
- Resolution: 32 bits
- Number of input channels: 10
- Maximum sampling rate: 38 kSPS
- Maximum PGA magnification: 32
- Communication interface: SPI
- Structure: Delta-Sigma
- Input type: differential, single sided
- Input voltage range:
- maximum from 2.5 V to 5 V
- minimum from -2.5 V to 0 V
- External dimensions: 65 x 58 mm
