Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034

Index: PLL-21623
The Motoron M3H256 is a three-channel driver for DC motors manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V , continuous current consumption can be up to 2 A , and instantaneous (for 1 second) up to 6.4 A. Motoron M3H256 is a module in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The subject of the sale is a fully assembled overlay.
Motoron M3H256 Triple Motor Controller Kit for Raspberry Pi - soldered - Pololu 5034
€48.90
€39.76 tax excl.
Waiting time: 4-6 weeks
Only on request
PayPal payment
Manufacturer: Pololu
Compatibility: Raspberry Pi

Product description: Motoron M3H256 three-channel driver for motors - 48 V / 2 A - shield for Raspberry Pi - assembled - Pololu 5033

The Motoron M3H256 is a three-channel DC motor controller manufactured by the Pololu company. Input voltage for powering DC motors should be in the range from 4.5 V to 48 V , continuous current consumption can be up to 2 A , and instantaneous (for 1 second) up to 6.4 A. Motoron M3H256 is a module in the form of an overlay for Raspberry Pi minicomputers, version B + and newer. The subject of the sale is a fully assembled overlay.

The product is compatible with the Raspberry Pi!

Before starting work, also check the user's guide prepared by the manufacturer.

Motoron M3H256 - three-channel motor driver - 48 V / 2 A - overlay for Raspberry Pi - Pololu 5034

Motoron M3H256 three-channel motor driver - 48 V / 2 A - Raspberry Pi overlay - assembled - Pololu 5033

How to connect the controller with the engine? - Motoron M3H256 driver connection diagram.

How to connect the controller with the engine? - Motoron M3H256 driver connection diagram.

Special features of the Motoron M3H256 controller

  • Equipped with a Motoron M3S256 that allows you to control up to three DC motors at a time
  • Protection against reverse polarity of the motor power supply
  • Optional cyclic redundancy check (CRC)
  • A command timeout feature that stops the motors from running if the Raspberry Pi stops working
  • Built-in thermal cut-off circuit
  • Filter capacitors placed on both power lines
  • Reverse current protection from motors

The subject of the sale is the driver for Motoron M3H256 motors for self-assembly. In our offer you will also find a version for self-assembly and a version without connectors .

Motoron M3H256 driver specification

  • Number of channels: 3
  • Input voltage: 4.5 V to 48 V
  • Logic supply voltage: 2.8 V to 5.5 V
  • Continuous output current: 2 A per channel
  • Maximum instantaneous current per channel: 6.4 A peak for 1 second
  • Communication interface: I2C
  • Maximum I2C frequency: up to 400 kHz
  • Configurable traffic parameters:
    • Maximum acceleration / deceleration forward / reverse
    • Initial speed forward / reverse
    • Forward / Reverse direction change delay
  • Maximum PWM frequency: configurable - eight options available from 1kHz to 80kHz
  • Configurable automatic error response
  • Measurement of engine supply voltage (VIN)
  • Two LEDs indicating the operating status of the controller

Kit contents

  • Motoron M3H256 three-channel motor driver - 48 V / 2 A - overlay for Raspberry Pi - Pololu 5034
  • Set of M2.5 x 11 mm spacers, bolts and nuts.
The arrangement of the pins of the Motoron M3H256 driver.

The arrangement of the pins of the Motoron M3H256 driver.

Lead 3
Voltage to 4.5 V
Voltage from 48.0 V
Current 2 A
Package width 9.5 cm
Package height 3.5 cm
Package depth 8 cm
Package weight 0.043 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: