Zestaw radiatorów do Raspberry Pi
Zestaw radiatorów do Raspberry Pi
Zestaw radiatorów do Raspberry Pi
Zestaw radiatorów do Raspberry Pi
Zestaw radiatorów do Raspberry Pi - zdjęcie 1
Zestaw radiatorów do Raspberry Pi - zdjęcie 2
Zestaw radiatorów do Raspberry Pi - zdjęcie 3
Zestaw radiatorów do Raspberry Pi - zdjęcie 4

Set of heat sinks for Raspberry Pi with thermoconductive tape - 3pcs

Index: RPI-01597

Set includes three radiators which provide cooling for minicomputer Raspberry Pi in versions: A, B, B+, 2 and 3. They are suitable for chips placed on the board and emitting the greatest amount of heat. Have the adhesive layer of the thermo-conductive tape. Radiators dimensions - 14 x 14 x 6 mm and 9 x 9 x 5 mm.

€0.91
€0.74 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: OEM
Compatibility: Raspberry Pi

Description

Set includes three radiators suitable for systems that are located on the board of minicomputer Raspberry Pi. Have the adhesive layer of thermo-conductive tape. Radiators dimensions - 14 x 14 x 6 mm and 9 x 9 x 5 mm.

Compatibility with Raspberry Pi

Heat sinks are compatible with the Raspberry Pi minicomputer in the following versions:

  • Raspberry Pi  2B, 3B, 3B+  - two heat sinks are mounted. There is no need to install the third, smallest heat sink because the power path has been improved.
  • Raspberry Pi 4B - you can mount one heat sink from this set to the main microcontroller.  Microcontroller is the element that generates the most heat.

 

Raspberry Pi 3, 2 and B+

Radiators are compatible with minicomputer Raspberry Pi 3 B, 2 B and B+. Because of the improvement of the power track, there is no need to install a third, the smallest of the radiators.

Raspberry Pi - radiatory

Raspberry Pi with installed radiators.

Attention!

During installation, you should pay attention not to make short circuit between the adjacent other electronic elements.

     

Test 4

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Arduino MKR1010 module ABX00023 - Wi-Fi ATSAMW25 + ESP32 - with connectors

The module based on the ATSAMW25 Atmel SoC system with wi-fi ESP32 U-Blox designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital...
Index: ARD-12945
Index: ARD-12945
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.28 Price €36.28

Arduino MCR Vidor4000 ABX00022 - module with FPGA Cyclone 10

The module based on the system Atmel SAMD21, designed for IoT projects. Equipped with a Cortex-M0+. It has 2 MB of Flash memory, 8 MB SRAM. In addition, the system is...
Index: ARD-12946
Index: ARD-12946
In stock, shipping 24 hours!
(Check quantity)
Regular price €76.51 Price €76.51

Filament Velleman PLA 1.75mm 0,75kg - red

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter is 1.75 mm. The kit contains 750 g filament in red with length of approx. 250m.
Index: VEL-10719
Index: VEL-10719
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.44 Price €20.44

Filament Velleman PLA 1.75mm 0,75kg - white

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter is 1.75 mm. The kit contains 750 g filament in white color with length of approx. 250m.
Index: VEL-10741
Index: VEL-10741
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.44 Price €20.44

Filament Spectrum PLA 1.75mm 1kg - Deep Black

Filament made of PLA used as a cartridge for 3D-printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Deep Black with length of 330.m.
Index: SPC-10979
Index: SPC-10979
Czas oczekiwania ok. 2-5 dni
Regular price €18.60 Price €18.60

Filament Spectrum PLA 1.75mm 1kg - Silver Star

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Silver Star with length of 330 m.
Index: SPC-10983
Index: SPC-10983
Czas oczekiwania ok. 2-5 dni
Regular price €18.60 Price €18.60

Filament Spectrum PLA 1.75mm 1kg - Arctic White

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Arctic White with length of 330...
Index: SPC-10986
Index: SPC-10986
Czas oczekiwania ok. 2-5 dni
Regular price €18.60 Price €18.60

Filament Spectrum PLA 1.75mm 1kg - Rust Copper

Filament made of PLA used as a cartridge for 3D printers and printing pens. The diameter of 1.75 mm. The set includes 1kg of filament in color Rust Copper with length of 330 m.
Index: SPC-10993
Index: SPC-10993
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.60 Price €18.60

Filament Devil Design PLA 1,75mm 1kg - White

Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in White...
Index: DEV-14090
Index: DEV-14090
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.93 Price €20.93

Filament Devil Design PLA 1,75mm 1kg - Gray

Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Gray color.
Index: DEV-14094
Index: DEV-14094
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.93 Price €20.93

Filament Devil Design PLA 1,75mm 1kg - Super Blue

Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Super Blue color.
Index: DEV-14096
Index: DEV-14096
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.93 Price €20.93

Filament Devil Design PLA 1,75mm 1kg - Aluminum

Filament Devil Design is made of PLA, used as cartridge for 3D-printers and printing pens. The diameter is 1.75 mm. The set includes 1kg filament in Aluminum color.
Index: DEV-14100
Index: DEV-14100
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.93 Price €20.93

Products from the same category

Replacement CSI/DSI Connector for Raspberry Pi 4B/3B+/3B/2B

The CSI/DSI connectors are used as camera and display slots in the Raspberry Pi 4B/3B+/3B/2B. The subject of sale is a spare part, which can be soldered into the board in...
Index: DNG-18275
Index: DNG-18275
Available, 24h shipping!
(Check quantity)
Regular price €0.44 Price €0.44

STS-Pi - Roving Robot 2WD - 2-wheel robot chassis for Raspberry Pi

The chassis of the robot STS-Pi was designed for use with Raspberry Pi together with the panel Explore HAT Pro or Explore pHAT, but will also cooperate with other motor...
Index: PIM-11466
Index: PIM-11466
In stock, shipping 24 hours!
(Check quantity)
Regular price €32.44 Price €32.44

Set of heatsinks for Raspberry Pi with thermoconductive tape + engraving - 2 pcs

Set includes one blue heatsink in size: 9 x 9 x 12 mm and a copper one engraved with the logo of the Raspberry Pi in size 12 x 12 mm. You can use them to cool the chips of a...
Index: DNG-12708
Index: DNG-12708
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.33 Price €1.33

Metal Spacers Delock M2,5 20mm + screws and nuts for Raspberry Pi - 4 pieces

Metal spacers with a length of 20 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08118
Index: RPI-08118
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.09 Price €5.09

Metal Spacers Delock M2,5 10mm + screws for Raspberry Pi - 4 pieces

Metal spacers with a length of 10 mm, designed for installation of extension boards for Raspberry Pi. Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08115
Index: RPI-08115
Czas oczekiwania ok. 5-10 dni
Regular price €4.16 Price €4.16

Female goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering

40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm.
Index: PIM-10622
Index: PIM-10622
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

Goldpin 2x20 straight raster 2.54mm

Male goldpin strip with 2 x 20 pins. Raster is 2.54 mm in length and 2.54 mm in width - between the two strips. It works with Raspberry Pi Zero among others.
Index: DNG-12659
Index: DNG-12659
Czas oczekiwania: ok. 10-30 dni
Regular price €0.22 Price €0.22

Connector Set - goldpin 2x20 male, female and mounting device - without soldering

Set of 40-pin goldpin connector strips which don't require soldering thanks to the clamps. They are used in Raspberry Pi 3 / 2 /B+ / Zero / Zero V. Raster of 2.54 mm. The set...
Index: PIM-10624
Index: PIM-10624
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Metal Spacers Delock M2,5 30mm + screws for Raspberry Pi - 4 pieces

Metal spacers with a length of 30 mm, designed for installation of extension boards for  Raspberry Pi . Elements of this type are based on the screw, allow to keep the same...
Index: RPI-08117
Index: RPI-08117
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

Female socket 2x20 raster 2.54mm for Raspberry Pi 4B/3B+/3B/Zero long pins 3mm - Adafruit 1992

40 -pin female connector strip compatible with the GPIO connector of the Raspberry Pi model 4B/3B+/3B/Zero with elongated pins with a length of 3 mm. Raster of the outputs is...
Index: ADA-07045
Index: ADA-07045
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.31 Price €3.31

Set of heat sinks for Raspberry Pi with thermoconductive tape + engraving - 3pcs.

Set consisting of three heat sinks in blue, copper and gold with engraved Raspberry Pi logo. They can be used to cool Raspberry Pi 4B / 3B+ / 3B / 2B minicomputer circuits.
Index: GRL-15287
Index: GRL-15287
Waiting time about 10-30 days
Regular price €2.95 Price €2.95

Male goldpin strip 2x20 raster 2,54mm for Raspberry Pi - without soldering

40-pin goldpin connector strip which doesn't require soldering thanks to the clamps. It is used in Raspberry Pi 4B/3B+/3B/Zero. Raster of 2.54 mm.
Index: PIM-10623
Index: PIM-10623
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.03 Price €2.03