Product description: Gravity - Expansion Board for Raspberry Pi Pico - DFRobot DFR0848
Expansion module made by DFRobot for the board Raspberry Pi Pico. It allows you to connect sensors from the Gravity series to the Raspberry Pi Pico module, in a simple way, thanks to the dedicated Gravity connectors. The manufacturer has placed a socket on the board for plugging in the Raspberry Pi Pico module, has derived all of its I/O connectors into male pins and a female socket which have been placed on the left side of the board, this side also contains the analogue connectors. On the right side, interfaces compatible with Gravity connectors have been placed. All pins are labeled, which makes it easier to find the right interface. In addition, the board has a GDI display interface and a JST PH2.0 input to connect a power source from 3.3 V to 5.5 V
Pinout expander for Raspberry Pi Pico, Pico module can be purchased separately.
The expander has all the Raspberry Pi Pico and Gravity connectors described.The manufacturer has prepared a user guide for Raspberry Pi Pico.
Main features of the Raspberry Pi Pico expander
- No soldering required, plug-and-play
- Supports all kinds of Gravity sensors and modules
- Equipped with JST PH2.0 interface for power supply from 3.3V to 5.5V
- Built-in GDI port, compatible with DFRobot GDI display series
DFRobot expander module specification
- All pins of the Raspberry Pi Pico module removed
- All pins of the Pico are described
- Digital IO x 13: GP2, GP3, GP12-22
- Analog IO x 3: GP26-GP28
- UART x2
- I2C x2
- SPI x2
- Power supply: JST PH2.0
- Supply voltage: 3.3 V to 5.5 V
- Display interface: GDI
- Dimensions: 73 x 63 mm
