Display E-paper E-Ink - 2.13'' 250x122px - SPI - black and white - for Raspberry Pi Pico - Waveshare 19406

Index: WSR-18993 EAN: 5904422371807
Display for Raspberry Pi Pico manufactured by Waveshare. The module is made with e-paper technology, which makes this kind of display suitable for reading e-books and electronic magazines. The diagonal is 2.13'' and the resolution is 250 x 122 px. The image is presented in two colors: black and white, with a gray scale of 2. The display provides the user with a wide viewing angle exceeding 170°.
Display E-paper E-Ink - 2.13'' 250x122px - SPI - black and white - for Raspberry Pi Pico -...
€15.50
€12.60 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Product description: E-Ink E-paper display - 2,13'' 250 x 122 px - SPI - black and white - for Raspberry Pi Pico - Waveshare 19406

Display forRaspberry Pi Picomanufactured by Waveshare. The module is made withe-papertechnology, which makes this kind of display suitable for reading e-books and electronic magazines. The diagonal is2.13''and the resolution is250 x 122 px. The image is presented in two colours:blackandwhite, with the grey scale of 2. The display provides the user with a wide viewing angle exceeding 170°.

Wyświetlacz wykonany w technologii e-paper do Raspberry Pi Pico.

Display made with e-paper technology for Raspberry Pi Pico.Raspberry Pi Picois not part of the kit, it can be purchased separately from our store.

Przekątna wyświetlacza jest równa 2,13''.The diagonal of the display is 2.13''.

Special features

  • Display made with e-paper technology, which is used in production of e-book readers
  • Image displayed in two colors: white and black
  • Low power consumption during use
  • Display of the last image even after disconnection of the power supply
  • SPI communication interface
  • Programmable with C/C++ and MicroPython

Pinouts

The displayis equipped withfemale connectors through which Raspberry Pi Pico should be connected. Among pins there are:

  • VSYS - power supply pin
  • GND - ground
  • e-Paper_DC - pin select: data / commands (high state: data; low state: commands)
  • e-Paper_CS - Chip select (activated by low state)
  • e-Paper_CLK - SPI bus clock output
  • e-Paper_DIN - SPI bus data output
  • e-Paper_RST - RESET pin (low state activated)
  • e-Paper_BUSY - Busy pin

Compatible withRaspberry Pi Pico
The manufacturer provides aproduct wikipage that contains information about the module's pinouts and a user guide.

Wyprowadzenia wyświetlacza.Display Pinouts.
Obraz wyświetlany jest w dwóch kolorach: czarnym i białym.

The image is displayed in two colors: black and white.

Technical specifications

  • Compatible with: Raspberry Pi Pico
  • Display type: e-paper
  • Operating voltage: 3.3 V / 5 V
  • Display diagonal: 2,13''
  • Resolution: 250 × 122 px
  • Pixel size: 0.194 × 0.194
  • Communication interface: 3-wire SPI, 4-wire SPI
  • Displayed colors: black and white
  • Gray scale: 2
  • Partial refresh time: 0.3 s
  • Full refresh time: 2 s
  • Refresh power: 26.4 mW
  • Standby current: <0.01 a="" li="">
  • Viewing angle: >170°
  • External dimensions: 65 x 30.5 mm
Screen - type e-paper
Screen - diagonal 2.13''
Screen - interface GPIO
Screen - touch no
Screen - resolution 250x122px
Package width 5 cm
Package height 7 cm
Package depth 2.5 cm
Package weight 0.021 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: