Description
Universal self-learning remote control for gates, controllers, alarm systems etc. It has 4 channels and fixed code 433.92 MHz MHz. It enables copying the codes from other remotes. It allows you to make spare transmitter in case of the loss of the original one.
Specification
- Working frequency: 433.92 MHz MHz
- 4 channels for programming
- The function of copying the code
- Reset code function
- The restore code function
- Power supply: battery A27 / 12V (included)
- Durable metal casing
- Dimensions: 55 x 29 x 14 mm
Resetting the memory
- Simultaneously press buttons 1 and 2 (closed and open lock): after a few seconds, the LED will begin to flash quickly, and then flashes constantly
- Release both buttons
- The memory is already erased
Copying the signal
- First, you have to clear the memory
- Coapt the remotes and hit a button to copy, and then, on the universal remote control, hit the button, under which will be the copied signal - the LED will flash 3 times and, after some time, it will begin to flash quickly
- The above steps should be performed for each button
The restoration of memory
- Simultaneously press buttons 1 and 3 (closed lock and speaker): the LED will blink twice
- Release both buttons
- The memory was restored
Details inthe user guide.
