• EOL

Resin for 3D printers FlashForge Standard LCD 0,5kg - White

Index: SGN-20625 EAN: 5904422381929
A standard LCD photopolymer resin in a solid white color. It is used as a molding material for prints in open source 3D printers equipped with LCD projector. The product is characterized by a short exposure time. During use it may emit a slightly unpleasant smell. Finished models obtained from FlashForge Standard LCD are characterized by high detail and smooth surface. The resin is cured by 405 nm light waves. Package contains 0,5 kg of product.
Resin for 3D printers FlashForge Standard LCD 0,5kg - White
€26.90
€21.87 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Flashforge

Attention!

The product has been discontinued. Check other products in category.

Description: 3D printer resin FlashForge Standard LCD 0,5 kg - White

Standard LCD photopolymer resin in a solid white color. It is used as a molding material for prints in open source 3D print ers equipped with LCD projector. The product is characterized by a short exposure time. During use it may emit a slightly unpleasant smell. Finished models obtained from FlashForge Standard LCD are characterized by high detail and smooth surface. The resin is cured by 405 nm light waves. Package contains 0.5 kg of product. FlashForge LCD Standard resin is suitable for low volume production and prototype runs.

Żywica do drukarek 3D FlashForge Standard LCD 0,5kg - biały

Resin for 3D printers FlashForge Standard LCD 0,5 kg - White.

Żywica do drukarek 3D FlashForge Standard LCD 0,5kg - biały

3D printer resin - sample printout.

Resin for 3D printers

Resin is a light-curing material designed for 3D printing. 3D printers using DLP and LCD technology can be successfully used to create even very detailed models. It is worth remembering that resin for 3D printing emits a slight odor, so all rooms where there are printers of this type, must be very well ventilated.

When working with the resin, always use protective equipment: glasses and nitrile gloves.

Shake the resin before use.

Specification of resin for 3D printers

Parameter Value
Manufacturer FlashForge
Resin type LCD photopolymer
Colour White
Density 1.05 to 1.15 g/ml
Viscosity 250 to 350 cps (at 25°C)
Shore Hardness 85 D
Tensile strength 48 MPa
Tensile elasticity 2250 MPa
Elongation at tension 10%
Bending strength 86 MPa
Packing capacity 500 g

Colour white
Mass 500 g
Package width 26 cm
Package height 11.2 cm
Package depth 11 cm
Package weight 0.678 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: