











Easy to use module for RFID reader with USB interface. It works with systems from the series: ID-2, ID-3, ID-12 and ID-20. In the computer, it is seen as a virtual serial COM port.
Easy to use module for RFID reader (125 kHz) with USB interface. It works with systems from the series: ID-2, ID-3, ID-12 and ID-20.
To start the device, you must attach the selected RFID reader and connect the system to the computer via the miniUSB cable. The module is installed as a virtual COM port. When coapting the identifier, its ID will be displayed on the screen of any terminal with the settings of: 9600 bps 8N1. The reading of data is signaled by turning on the LED and audible alarm emitted by buzzer (it can be disabled by soldering the jumpers). A detailed description of the connection is in the instructions.
The module does not contain RFID reader. It can be purchased separately. In our store, there is also a miniUSB cables.
The video shows how to connect RFID systems, conducted were also the range tests of RFID readers and identifiers from SparkFun.
The video, made by the SparkFun, introduces the capabilities of the product.
Useful links |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Raspberry Pi Model B 512MB RAM
Raspberry Pi Model B (512MB RAM) is a miniature computer that can successfully replace a large office device. The module allows you to process video in high definition. Has:...RFID chip - 16mm 125kHz - SparkFun SEN-09417
Small token - RFID identifier in the form of pill with a diameter of 16 mm. Small size allows for sewing it into clothing or for closing in any case. Each chip has a unique...RFID reader ID-20LA - 125kHz - SparkFun SEN-11828
Easy to use reader with integrated antenna, allowing to receive and transmit through the serial interface to the main device (e.g. Arduino), the ID of the RFID identifier....Customers who bought this product also bought:
Temperature sensor DS18B20 - digital 1-wire THT
Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.Raspberry Pi Model B 512MB RAM
Raspberry Pi Model B (512MB RAM) is a miniature computer that can successfully replace a large office device. The module allows you to process video in high definition. Has:...Self-adhesive round feet low 8mm - 4 pcs.
Self-adhesive feet - round props for electronic modules, with an 8 mm diameter. Price for 4 PCs.Power adapter Extreme microUSB 5V 2,1A
A power supply with a microUSB tip compatible with the Raspberry Pi 2 and B + minicomputer with a maximum current capacity of 2.1 A.RFID identification card - 125kHz - SparkFun
RFID identifier in the form of a plastic card with the dimensions of payment cards. Each chip has a unique 32-bit code. The devices operate at a short distance from the...RFID reader ID-20LA - 125kHz - SparkFun SEN-11828
Easy to use reader with integrated antenna, allowing to receive and transmit through the serial interface to the main device (e.g. Arduino), the ID of the RFID identifier....ProtoPi module - extension of Raspberry Pi to contact plate + tape
The module allows you to easily connect the GPIO outputs of your Raspberry minicomputer to any contact plate without the need for soldering.Raspberry Pi NoIR Camera HD - night camera for Raspberry Pi
Infrared sensitive camera module for Raspberry Pi mini-computer versions 3, 2, B+, A+ and older A and B. The device has a 5 Mpx sensor and supports HD 1080p, 720p and 640 x...Alcohol sensor MQ-3 - semiconductor
Alcohol sensor with analog output. It measures the content of alcohol, for example, in the exhaled air.Stand for MQ - gas sensor - Pololu 1479
Stand that allows mounting of sensors from MQ series.Products from the same category
RFID chip - 125kHz 25mm - with an adhesive layer
Small token - RFID identifier in the form of pill with a diameter of 25 mm. Small size allows for sewing it into clothing or for closing in any case. The carrier frequency is...13.56MHz, 125MHz RFID/NFC Keychain Fob
The RFID identifier in the form of a keychain. Each chip has a unique 32-bit code. The device works at a small distance from the reader, the carrier frequency is 13.56 MHz...RFID keychain S103N-GY - 125kHz - compatible with EM4100 - grey - 10pcs
The RFID identifier in the form of a grey keychain. It operates at a frequency of 125 kHz . Each chip has a unique code. It has 64 bits of ROM memory. The device works at a...RFiD keychain - 125kHz - red - 10pcs
The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125...Velleman VMA405 - RFID MF RC522 MiFare 13,56MHz module + card and key ring
Board allows you to read and save data from RFID devices at 13.56 MHz frequency. The module is based on MFRC522 system, it is powered with the voltage from 3.3 V to 12 V, it...Grove - 125kHz RFID reader with antenna
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...RFID keychain - 125kHz - EMKF-1 Roger
The RFID /NFC identifier in the form of a keychain. The devices work at a small distance from the reader, the carrier frequency is 125 kHz.RFID keychain S103N-BE - 125kHz - compatible with EM4100 - blue - 10pcs
The RFID identifier in the form of a blue keychain. Each chip has a unique code. It is equipped with a 64-bit of ROM memory. The device works at a small distance from the...NFC Tag - convex sticker AI-Speaker - round
NFC tag from AI-Speaker as a round, convex sticker. It can be recorded and read using proximity technology , e.g. with a mobile phone equipped with Near Field...RFID / NFC MiFare Classic Tag transparent - 13.56MHz - Adafruit 361
The RFID /NFC identifier in the form of a transparent marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...13.56MHz NFC antenna with U.FL connection
The NFC antenna operating in the band of 13.56 MHz and equipped with a u.FL connector. It works, i.a. with modules of NFC Shield V2 Grove Xadow NFC and NFC.