- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Wio RP2040 Mini Onboard WiFi - board with RP2040 microcontroller - Seeedstudio 102991555
Seeedstudio Wio RP2040 small development board based on Wio RP2040 module equipped with WiFi connectivity. The powerful wireless communication chip supports frequencies from 2.4 to 2.4835 GHz and Ap&Station mode. The board uses the Thonny code editor used by Raspberry Pi Pico, which allows you to adapt your existing Pi Pico project to the Pico IoT version with a few simple lines of code.
Wio RP2040 Mini Onboard WiFi - Seeedstudio 102991555.
Thepin layout on the Wio RP2040 Mini Onboard WiFi board.
Communication on the Wio RP2040
The development board offers the possibility to use popular communication interfaces. On the Wio RP2040 you will find 28 GPIO pins (19 support PIO and PWM), 2 x UART, 4 x ADC, 2 x SPI and 2 x I2C. Some pins can be multiplexed, e.g. GP12 and GP13 with I2C, SPI, UART functions. The microcontroller is equipped with a USB type C socket, used for power and data transfer. There are also two LEDs on the board. One informs about the power supply of the Wio RP2040, while the other is user controlled (connected to pin GP13).
Main features of Wio RP2040
- Dual core 133 MHz RP2040 processor with 264 KB SRAM and 2 MB Flash
- Powerful wireless communication chip supports 2.4 to 2.4835 GHz and Ap&Station mode
- Compatible with Thonny editor
- Convenient pinout adapted to prototyping board
Example applications
- Pico projects with wireless functions
- Wireless control, home automation - smart home
- Smart toys
Wio RP2040 WiFi operating schematic.
Integrated Thonny development environment.
Compatibility with the Thonny environment
The Wio RP2040 Mini is fully compatible with the Thonny code editor. Its user does not need to have professional electronics knowledge to control devices using the simple MicroPython language. The presented development board has support for C/C++ and MicroPython. The manufacturer has also prepared a dedicated Wio RP2040 Module MicroPython UF2 file, recommended to work with the product.
Wio RP2040 Mini Onboard WiFi Specifications
- RP2040 Raspberry Pi microcontroller
- Dual Cortex M0+ 133 MHz processor
- 264 kB SRAM embedded memory
- 2 MB Flash QSPI memory
- Built-in USB-C connector for data and power transfer
- 2.4 GHz wireless connectivity
- Supports IEEE802.11 b/g/n
- Operating range 2.4 GHz to 2.4835 GHz
- Supports application and station mode
- Built-in power on and reset buttons
- Two LEDs: power indicator and programmable LED (GP13)
- Power supply:
- USB Type C port - 5 V (default power method)
- VIN and GND pins
- Supported programming languages:
- MicroPython
- C/C++
- Dimensions: 25.8 x 45.5 mm
Technical sketch of the Wio RP2040 Mini Onboard WiFi.
