Specification:
- Supply voltage: 5.0 V
- Current: 25 mA max.
- Output: analog signal
- The range of output signal: 0 V to VIN ( 5 V)
- Dimensions: 13 x 7.5 mm
- Hole diameter: 2.5 mm
- Weight: 0.5 g (without connectors)
Details inthe documentation.
Method of application
- Connect the sensor's output to the analog-to-digital converter (for example, embedded inthe microcontroller).
- Connect usingthe comparatordirectly to the I/O pins
- Using the built-in into some microcontrollers, the internal comparator
The module has three pins that need to be connected:
- VIN- supply voltage
- GND- ground of the system
- OUT- analog output signal
Pins are the popular goldpin connectors to connect sensor with breadboardor commissioning module execution (for example,the Raspberry Pi - via an analog-to-digital converter,STM32DiscoveryorArduino) viawires. Sensors of this typefind use in robots likeline followeras sensors detecting the track as a black line on a white background.
