• EOL

Flame sensor 700-1000nm - digital

Index: GRL-12505

The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5 V. The range of the detected wave is from 700 nm to 1000 nm, detection angle is 60 °. The detection sensitivity is adjustable via potentiometer. The output is a digital signal.

Flame sensor 700-1000nm - digital
€1.90
€1.54 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: OEM

Attention!

The product has been discontinued. Check other products incategory.

Description

The sensor used to detect fire. It is powered with the voltage from 3.3 V to 5.3 V. The range of the detected wave is from 760 nm to 1100 nm. The output is an analog voltage and a digital signal which changes the status when exceeding a given threshold using the potentiometer. The device operates in temperatures from -25 °C to 85 °C.

 

Despite the fact that the module detects a fire, it has not the fire protection. It has to be mounted in the safe distance from the fire to prevent the damage of the board.

Sensor maintenance

The sensor has a digital output, the sensitivity level of which can be adjusted using the integrated potentiometer.

Pin Description
VCC Supply voltage is from 3.3 V to 5 V.
GND The ground of the system.
DOUT Digital output which sensitivity is set using the potentiometer.

 

The product is compatible with Arduino

Online, you can findan example of connectingto theArduino UNO.

Specification

  • Chip: LM393
  • Supply voltage: from 3.3 V to 5 V

  • Range of the detected wave: from 700 to 1000 nm
  • Detection angle: 0 to 60 °
  • Module dimensions: 32 x 14 mm

 

Interface Digital I / O
Package width 5 cm
Package height 0.7 cm
Package depth 8.5 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: