



Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.
The cable allows you to connect two servos to one input of the controller. Both servos are controlled by the same signal.
Raster | 2.54 mm |
Cable - type | to servos |
Cable length | 0.6 m |
Lead | 3 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Servo TowerPro SG-90 - micro - 180 degrees
Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.Servo Hitec HS-325HB - standard
A strong servo is a standard full carbon clincher wheelset, carbon modes increased strength.. Speed: 0.15 s/60 ° . Torque: 3.7 kg*cm. Dimensions: 40 x 20 x 37 mm....Customers who bought this product also bought:
Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.CNY70 reflective optocoupler sensor
Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.L293D - two-channel 36V / 0.6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...Antimagnetic tweezer curved BK15
Stainless steel antimagnetic tweezers. Symbol: Baku BK15ESD.Soldering tin in tube 16g / 1.00mm
Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.Microphone 50-56dB 9 / 4.5mm - THT - 10 pcs.
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 36-38 dB. Pins for soldering to the printed circuit board.Infrared receiver TSOP4838 - 38kHz
IR receiver TSOP4838, it is operating at a frequency of 38 kHz.Resistance soldering iron ZD200C - 60W
Resistance soldering iron 60 W, powered by a mains voltage of 230 V. It is ideal for soldering or desoldering small electronic components.IR transmitter 5mm 940nm LIRED5B-940-H
Infrared transmitter in 5 mm housing. Wavelength 940 nm. Transparent lens.Products from the same category
Splitter Wire for Servos Y - 30 cm twisted (JR)
Twisted wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servings 30cm twisted
Extension cable with the length of 30 cm ended with the standard plug for the servos. It has twisted cables.Splitter Wire for Servos Y - 60 cm twisted (JR)
Twisted wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.JST Battery to Servo Power Adaptor - Kitronik 4176
An adapter that allows powering the servo from the battery or accumulator with JST plug. The cable length is 50 mm. The cable is terminated with a 3-pin plug and a 2-pin...Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 15 cm (JR)
Wire splitter for servos with length of 15 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servos 45cm twisted
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...