



Extension cable with the length of 30 cm ended with the standard plug for the servos. It has twisted cables.
Extension cable with the length of 30 cm ended with the standard plug for the servos. It has twisted cables.
In our assortment is a wide choice of servos.
Raster | 2.54 mm |
Cable - type | to servos |
Cable length | 0.3 m |
Lead | 3 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom
Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden
No customer reviews for the moment.
Servo TowerPro SG-5010 - standard
Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.Servo Hitec HS-325HB - standard
A strong servo is a standard full carbon clincher wheelset, carbon modes increased strength.. Speed: 0.15 s/60 ° . Torque: 3.7 kg*cm. Dimensions: 40 x 20 x 37 mm....Customers who bought this product also bought:
Radio module RFM02-433-D 433Mhz - THT transmitter
Wireless radio transmitter operating at 433 MHz with the SPI communication interface. Powered with the voltage of 2.2 V and 5.4 V, the pins are the goldpin connectors. Max. the...Radio module RFM01-433-D 433MHz - THT receiver
Wireless radio receiver working at 433 MHz band, with the SPI communication interface. Powered with the voltage of 2.2 V - 5.4 V, the pins are the goldpin connectors. The...Servo TowerPro SG-90 - micro - 180 degrees
Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.Screws, Nuts and Washers Set - 330pcs.
Set of screws, washers and nuts of various sizes.Servo TowerPro SG-5010 - standard
Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.RandomCategoryProducts
Splitter Wire for Servos Y - 30 cm twisted (JR)
Twisted wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 60 cm twisted (JR)
Twisted wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 60 cm (JR)
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 45cm twisted
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...Extension cord for servos 60 cm - twisted
Extension cable with the length of 60 cm ended with the standard plug for the servos. It has twisted cables.JST Battery to Servo Power Adaptor - Kitronik 4176
An adapter that allows powering the servo from the battery or accumulator with JST plug. The cable length is 50 mm. The cable is terminated with a 3-pin plug and a 2-pin...