



Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.
Extension cable with the length of 45 cm ended with the standard plug for the servos. It has twisted cables.
In our assortment is a wide choice of servos.
Raster | 2.54 mm |
Cable - type | to servos |
Cable length | 0.45 m |
Lead | 3 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom
Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden
No customer reviews for the moment.
Servo TowerPro SG-5010 - standard
Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.Servo Hitec HS-325HB - standard
A strong servo is a standard full carbon clincher wheelset, carbon modes increased strength.. Speed: 0.15 s/60 ° . Torque: 3.7 kg*cm. Dimensions: 40 x 20 x 37 mm....Customers who bought this product also bought:
LSM303DLHC 3-axis digital Accelerometer + Magnetometer - Polol module
A sensor to determine acceleration and magnetic field. The measurement of these quantities is made possible by an integrated 3-axis accelerometer with a magnetometer....Soldering station WEP 936A 75W
Soldering station 936A WEP using soldering tips, with a total capacity of 75 watts with adjustable temperature from 200 °C to 480 °C. The device has a soldering iron with...Helping hand ZD10D - handle with magnifying glass - Vorel 73500
Mounting bracket with magnifying glass 2.0 diopter and two grippers. The product is perfect for working with small electronics, e.g. while soldering or joining elements....Power supply multi-range Voice Kraft 3V-12V / 1,2A
Universal power supply with adjustable output voltage in the range of 3V-12V , with continuous output current up to 1.2A (momentary up to 2A). It has a set of the most...Stepper engine 39BYGH405B 200 steps /rev 12V/0.4A/0.21Nm
Bipolar stepper motor, four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 12 V, draws 400 mA per coil. Holding torque is 2.14 kg*cm (0.21 Nm)....Set of resistors for CF THT 1 / 4W LED diodes - 90pcs.
Set of 3 values of 30 through hole resistors used for LEDs. Thanks to the values of 220 Ω, 470 Ω and 1.2 kΩ, the user can choose the desired brightness of the LED.Angular mounting for servomechanism
The mounting makes it easy to mount the servomotor in a way that is difficult to do with standard, built-in brackets. Single sold separately.PIR HC-SR501 motion detector - green
Sensor, type PIR, can detect movement. Used to detect objects in the premises, alarm and lighting systems. The sensor is supplied with the voltage from 4.5 to 20 V. The...StarterKit advanced for Arduino (without the Arduino module)
A set of electronic components that will help you get started with modules from the Arduino. The kit includes LEDs, resistors, sensors, chips and LCD display, engine along with...Aluminium Mounting Hub 5mm M3 - 2pcs. - Pololu 1998
Hub makes it easy to mount the wheel on the motor with the shaft of 5 mm using the M3 screws. The set has two pieces.Servo PowerHD AR-1201MG - continuous work 360 degrees with doublesided mount
Strong standard servo. Works as a variable speed motor. Speed: 0,20 sec/60°. Torque: 13.5 kg*cm . Dimensions: 40.5 x 20.0 x 38.0 mm Weight: 60 gr.Mega Box case for Arduino transparent
Transparent enclosure protecting Arduino Mega2560 module against external conditions. It provides access to all connectors and guarantees ventilation of the integrated circuits.Products from the same category
Splitter Wire for Servos Y - 30 cm twisted (JR)
Twisted wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servings 30cm twisted
Extension cable with the length of 30 cm ended with the standard plug for the servos. It has twisted cables.Splitter Wire for Servos Y - 30 cm (JR)
Wire splitter for servos with length of 30 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 60 cm (JR)
Wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Splitter Wire for Servos Y - 60 cm twisted (JR)
Twisted wire splitter for servos with length of 60 cm. The wire allows you to connect two servos to one input of the controller.Extension cord for servos 15cm twisted
Extension cable with the length of 15 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 90 cm - twisted
Extension cable with the length of 90 cm ended with the standard plug for the servos. It has twisted cables.Extension cord for servos 60 cm - twisted
Extension cable with the length of 60 cm ended with the standard plug for the servos. It has twisted cables.Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...JST Battery to Servo Power Adaptor - Kitronik 4176
An adapter that allows powering the servo from the battery or accumulator with JST plug. The cable length is 50 mm. The cable is terminated with a 3-pin plug and a 2-pin...