Product description: 3D printer - Skrinter
Skrinter 3D printer based on the Zortrax M200 Plus series with a tightly closed working area in the dimensions of 200 x 200 x 180 mm . The device has been equipped with a WiFi module, thanks to which files can be sent wirelessly. The built-in camera enables continuous control of the print. The printer supports a very wide range of filaments . Thanks to full integration with the SkriLab educational laboratory, it is an ideal printer for schools .
3D printer - Screener.
Skrimarket - a library of ready-made 3D models.
3D model library
The printer does not require self-assembly - it is fully assembled and immediately ready for operation. Out of the box, just connect it to a power source, connect it to WiFi using the touch screen, pair it with your Skrimarket account, then choose one of the ready-made models and start printing. There are thousands of designs in the library that you can use. Thanks to the Skrimarket website, you can also check the status of your printout or upload models created in another program.
Filament end sensor
The printer will automatically end the printing process if it detects that it is out of material. After refilling the filament, it is possible to complete the printout. Thanks to this solution, you will avoid wasting material, while saving money.
The Skinterter is the perfect printer for schools.
You can monitor the printing process through your Skrimarket account.
Built-in camera
The printer is equipped with a camera placed inside the working chamber, with which you can monitor the printing process remotely . This will ensure that the printer is working properly while you are away.
A wide selection of filaments
The use of a single extruder in the Skrinter printer allows you to print from a wide range of filaments. Among the materials it supports, there are more demanding types, as well as those that are most often used during school classes , e.g. PLA, PETG or ABS.
Printouts can make it easier to understand the selected issue.
Technical specification of the Skinterer 3D printer
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Supply voltage: | 110V/5.9A @ 50/60Hz 240V/2.5A @ 50/60Hz |
| Maximum power: | 320W |
| printing technology: | FFF / FPD |
| Working area: | 200x200x180mm |
| Material form: | Spool |
| Material Diameter: | 1.75mm |
| nozzle diameter: | 0.3mm/0.4mm/0.6mm |
| Communication: | USB / RJ45 / WiFi |
| extruder: | Single (tailored for more demanding materials) |
| Cooling system: | Extruder fan and two print cooling fans |
| Head: | New design of the head (V3) and nozzle |
| Material sensor: | Mechanical |
| Platform: | Perforated, equipped with a Pogo connector |
| Support structures: | Mechanically removable - printed from model material |
| External materials: | Supported |
| Platform leveling: | Automatic point height measurement |
| Display: | touch IPS 4" 800 x 480 pixels |
| Layer resolution: | from 90 to 390 microns (for 0.4 mm nozzle) |
| Minimum Wall Thickness: | 400 microns (for 0.4 mm nozzle) |
| Maximum printing temperature (extruder): | 290°C |
| working platform: | Heated |
| Processor: | Quad Core |
| Operating system: | Android |
| Room temperature for working device: | from 20°C to 30°C |
| storage temperature: | from 0°C to 35°C |
| Software Package: | Z-SUITE 2 |
| Supported Input File Types: | .stl / .obj / .dxf / .3mf |
| Supported operating systems: | Mac OS X / Windows 7 and later versions |
| Output file format: | .ZCODEX |
| Device dimensions without spool: | 505 x 360 x 350mm |
| Dimensions of the device with a spool: | 505x430x350mm |
| Device weight: | 16 kg |
