• EOL

3D printer Snapmaker v2.0 3in1 A250 - laser module, CNC, 3D printing

Index: SNM-17093 EAN: 6971573448138

Snapmaker's modular 3D printer is made entirely of metal, which makes it quick and easy to install and gives the construction an extraordinary stability. It allows you to print on a 230 x 235 x 250 mm work area using a 1.75 mm diameter filament. The device can be equipped with a module for laser cutting and engraving and a module for CNC carving.

3D printer Snapmaker v2.0 3in1 A250 - laser module, CNC, 3D printing
€1,628.50
€1,323.98 tax excl.
Manufacturer: Snapmaker

Attention!

The product has been discontinued. Check other products in category.

Product description: 3D Snapmaker v2.0 printer model A250

Snapmaker 2.0is a 3-in-1 device, a combination ofa 3D printer, CNC milling machine andlaser plotter. Thanks to the possibility of modifying the device we gaina toolthat can be extremely effective in the electronics workshop, a fan of new technologies or a DIY enthusiast.

3D printing module in Snapmaker 2.0.

3D printing, the flagship feature of Snapmaker 2.0

Thanks to the extremely stable construction and technologies used,Snapmaker 2.0allows for fast andprecise printing. The device is idealfor beginners, for example, because it has a very intuitive software to operate the device in printer mode. More advanced people will also find something for themselves because they will have the opportunity topersonalize printing options. Thanks to theheated working platform and direct-type extruderwe can use many printing materials. At last,the problems withflexible filamentsare over!

High quality not only on paper

Thanks to the stablecombination of steel, aluminiumand perfectly matched parts, therepeatability of the machine is up to0.005 mm, which is a very good result.Snapmaker 2.0will prove to you that making a short series of machines is trivial, and it is a pleasure to work with it.


Sample parts made on the machine.

Laser module in operation.

Laser engraving and cutting

The laser moduleallows extremely efficientcutting and engraving. Start creating interestingdecorations made of wood, leather, material and acrylic. With a 1.6W laser, you can cut the materials of your choice, bringing more professionalism to your projects.The laser moduleis also equipped witha camera, so you can afford to perfectly match the workspace to the current workpiece.

3-in-1 software

Are you surprised by the capabilities ofSnapmaker 2.0? If so, you must know that the whole device software also allows you to control all the functions ofSnapmaker 2.0! No longer do you have to look for separate software fora 3D printer,laser routerandCNC milling machine, everything is in one place.

Presentation of the software for controlling the device.

CNC module in operation.

CNC machining is just another advantage of Snapmaker 2.0.

The CNCmodule allows precise machining of materials such as wood, acrylic, carbon fibre sheets or even PCB laminate. Start creatingyour own PCBs yourself, and place the equipment in milled wood enclosures, instead of looking for barriers to look for opportunities, there are plenty of them! To make working with the CNC safe, awooden table and a set of hooksare included to prevent the material from moving.

Snapmaker 2.0 modular design

Imagine that one construction can replace several tools in a workshop. This is theSnapmaker 2.0! Thanks to its modular design, it allows you to fully adapt its functionality to your needs. Not a series of machines,Snapmaker 2.0is a powerfultoolfor people as creative as you.

The device is built with modules that facilitate its expansion.

The process of assembling the device takes very short time.

The device is extremely easy to assemble!

Snapmaker 2.0 makes the folding process as easy as possible, the motors are built into the profiles and the plates to connect the components are fixed permanently to the linear systems, this solution gives great convenience and safety. Unlike amateur counterparts that have to be assembled for hours, assemblingSnapmaker2.0 takes just a moment.

Wi-Fi connectivity and touch screen

For maximum convenience in configuringSnapmaker 2.0Wi-Fi communicationhas been introduced. As well as transferring files to the device, you can also easily update them, on devices on the local network you can also view the progress of work.The touchscreencomes with Android and anadvanced processorso you can control your tools more easily than ever before!

Numerous ways to use your device

The device is equipped withsoftware and hardware procedures, which will certainly facilitate its use.Self-levelling of the work tableeliminates the problem ofplatform self-calibrationevery few prints.Restoring the work after the loss of voltagegives an extraordinary comfort, we do not have to be afraid that during an accidental disconnection of the device from the power supply we will lose our work.Print cooling, improved compared to the previous version of the device, allows us to create elements that will be partially in the air without supports.A flexible adhesive padmakes the printout stick to the table without additional preparations. We also do not have to use tools to unstick the printout from the platform, just bend it and the printout will fall off by itself. Thecamera built into the laser modulehelps to determine the area where the laser works, no more setting the center on an unusual shape. The linear modules have been fully encapsulated, thus avoiding the possibility of blurring of moving parts by getting chips or dust.

Afraid you can't handle it? Then you are wrong! The manufacturer provides step-by-step instructions on how to assemble the device and how to configure it for specific functions, which is a great advantage.


The large touch screen makes working with the device easier.

Snapmaker 2.0 device specifications

Basic information
Colour display: 5" touch screen
Frame material: aluminium alloy, steel
Communication: USB disk, USB cable, Wi-Fi
Power supply voltage: 100 V to 240 V AC
Supported systems: Mac OS, Windows
Dimensions of the assembled device 700 (L) x 660 (W) x 580 (H) mm
Workspace for 3D printing: 230 (L) x 250 (W) x 235 (H) mm
Laser workspace: 230 (L) x 250 (W) mm
CNC workspace: 230 (L) x 250 (W) x 180 (H) mm
3D printing
Nozzle diameter: 0.4 mm
Maximum print nozzle temperature: 275°C
Maximum working platform temperature: 100°C
Layer resolution: 50 to 300 microns
Supported materials: PLA, ABS, PETG, TPU, PP, WoodFill, LayBrick
Diameter of the filament:

1.75 mm

Supported file formats in Snapmaker Luban: .stl, .obj
Laser engraving
Laser power: 1600 mW
Safety class: 3B
Supported materials: wood, leather, plastic, fabric, paper, acrylic
Supported file formats in Snapmaker Luban: .svg, .png, .jpg, .jpeg, .bmp, .dxf
CNC carving
Handle diameter: from 0.5 mm to 6.35 mm
Spindle rotation: 6000 to 12000 RPM
Supported materials: wood, acrylic, PCB, carbon fibre sheets
Supported file formats in Snapmaker Luban:

.svg, .png, .jpg, .jpeg, .bmp, .dxf, .step, .dwg

The kit includes:

  • Linear modules

  • Laser module (1600 mW with built-in camera)

  • 3D printing module

  • Controller (based on Cortex-M4 processor)

  • 5" Intelligent touch screen (operated by Android, based on Quad Core A7 1.1GHz processor)

  • Power supply with power cords

  • Magnetic table for 3D printing with adhesive pad for increased adhesion

  • Aluminium table for working with the laser module

  • Wooden table for working with CNC module (module equipped with ER-11 handle)

  • Base of the device with non-slip feet

  • Work platform base

  • Mountings for linear modules

  • Touchscreen mount

  • Cable set for connection of modules, work table, line modules and screen

  • Converters for cables

  • Filament holder

  • Flash drive

  • Clamping to the material while working with the CNC module

  • Tool set (Screwdriver with replaceable bits, wrenches, pliers, tweezers, spatula)

  • Screw set

  • Leveling plates for the working platform

  • Instructions for assembly and use

  • Two pairs of safety glasses (for CNC and laser operation)

  • Two cutters

  • Filament spool (1 kg PLA)

  • Complete set of test materials

  • Cleaning material

3D - print surface 230x250x235 mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.1 mm
3D - hotend amount 1
3D - filament diameter 1.75 mm
3D - printing speed 10 mm/s do 100 mm/s
3D - printing thickness 0.005 - 0.1 mm
3D - nozzle temp 280 °C
3D - table temp. 100 °C
Package width 54 cm
Package height 32 cm
Package depth 56 cm
Package weight 24 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: