- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product Description: Snapmaker 2.0 A150 Printer Chamber
Protective enclosure manufactured for the3 in 1 Snapmaker A150 version 2.0. The main construction elements of the chamber are made ofaircraft grade aluminium alloy, which is characterised by high strength and low weight, andacrylicwith a coating that filters the laser radiation used by the engraving module. The use of the chamber significantly increases the safety of working with the device. One of the systems increasing work safety is the chamber door opening sensor, which almost immediately stops the device in case of its opening. The chamber has an additional lighting system based on LED diodes and a ventilation system allowing for effective removal of vapours produced while working with"Snapmaker". The entire structure is airtight, which minimizes the risk of printout damage due to shrinkage and warping of the filament or detachment of printout from the working platform due to air blast. The airtight chamber also protects the work with theCNCmodule. The enclosure will not allow fine filings and pollen generated during operation to escape into the air and settle on other surfaces in the room.
The acrylic of which the side walls are made has a coating that filters the laser radiation.
The housing is equipped with additional lighting.
Technical Specifications
- Material: aircraft aluminum, acrylic
- Dimensions: 398 mm × 423 mm × 407 mm
- Weight: 9.6 kg
