Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W - zdjęcie 1
Cyfrowa stacja 937D - 60W - zdjęcie 2
Cyfrowa stacja 937D - 60W - zdjęcie 3

Soldering station 2in1 hotair and soldering iron WEP 852D+ with fan

Index: LUT-01124 EAN: 5907558240085

Tip-base soldering iron and hot air iron. The device has continuous temperature control and two LED displays. System ESD Safe provides security for the solder joint elements. The air flow is provided through a fan located in the iron.

€62.67
€50.95 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: WEP

Product description: Soldering station 2in1 hotair and tip-based WEP 852D+

Tip-base soldering iron and hot air ironThe device has continuous temperature control and two LED displays. System ESD Safe provides security for the solder joint elements. The air flow is provided through a fan located in the iron.

 

Check out our offer of additional tips!

Specification of soldering station WEP 852D+

  • Power supply: AC 230V, 50 Hz (network)
  • The system is ESD Safe
  • Included 3 pieces of round nozzles with a diameter of 5mm, 7mm, 9mm

 

Hotair Soldering Iron

  • Continuously adjustable temperature of hot air in the range from 100 °C to 480 °C
  • Two LED displays, showing the set temperature
  • Temperature setting buttons
  • Fan performance: do120 l/min
  • Adjustable air supply with regulator
  • The air flow is provided through a fan located in the handle

 

Soldering Iron Tip-based

  • Smooth adjustment of temperature of the iron in the range 200-480V°C
  • The power of the iron 60 W

 

Included

  • Soldering station WEP 852D+
  • Stand for hotair iron
  • Stand for tip-based iron along with a sponge to clean the soldering tip
  • Soldering iron
  • Nozzles hotair:
    • round with a diameter of 5 mm
    • round with a diameter of 7 mm
    • round with a diameter of 9 mm
  • Power cable

 

 

First run

  • Youi should not run the device immediately after delivery.
  • Equipment must remain for about 12 hours at room temperature before switching on.
  • All complaints caused by running of the equipment too soon will be denied.
  • You must completely remove the screw/screws from the bottom station if the source of air supply is the compressor. These screws are marked in red (1 or 3 screws depending on model).

Our range of accessories for soldering:

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Temperature 200 - 480 °C
Solder - Fan yes
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.91 Price €0.91
  • Free shipping

Tip cleaner for soldering tools with stand

Soldering tips cleaner made from brass chips.
Index: LUT-00613
Index: LUT-00613
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.86 Price €4.86
  • Free shipping

Solder sucker for tin OD-25

A device for removing tin excess. It has a Teflon tip, metal case with 20 mm in diameter. Length of the device is 228 mm.
Index: LUT-00630
Index: LUT-00630
Unavailable
Regular price €4.63 Price €4.63
  • Free shipping

Sponge for cleaning soldering tips - round - 5pcs.

Round sponge for cleaning the soldering iron blade with a diameter of about 50 mm.
Index: LUT-00638
Index: LUT-00638
Available, 24h shipping!
(Check quantity)
Regular price €1.84 Price €1.84
  • Free shipping

Customers who bought this product also bought:

Male plug cables - crocodile - 10pcs

Set of 10 wires. On one side is a standard male plug (goldpin plug), on the other end is the crocodile connector.
Index: KAB-01245
Index: KAB-01245
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.63 Price €2.63
  • Free shipping

Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V

Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.44 Price €0.44
  • Free shipping

DC plug 5,5x2,1mm for the cable - 10 pcs

DC plug, φ5.5 x 2.1 mm at cable is made of plastic. Plug length: 9.5 mm. 10 pcs.
Index: KAB-00414
Index: KAB-00414
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.05 Price €1.05
  • Free shipping

Tact Switch 6x6mm/4,3mm DIP - 5 pcs.

A small monostable button mounted in a through-hole way - THT with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.
Index: SWT-00377
Index: SWT-00377
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.35 Price €0.35
  • Free shipping

Tact Switch 6x6mm/13mm DIP - 5pcs.

A small monostable button mounted in a through-hole way - THT with two pins with the size: 6x6 mm, height: 13 mm. The price is for 5 pieces.
Index: SWT-00380
Index: SWT-00380
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.46 Price €0.46
  • Free shipping

Soldering tip - type T-LB

Tip for soldering station type T-LB, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-01034
Index: LUT-01034
Czas oczekiwania: ok. 10-30 dni
Regular price €2.08 Price €2.08
  • Free shipping

Tip for soldering station - type T-I

Tip for soldering station type T-I, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-01120
Index: LUT-01120
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98
  • Free shipping

Soldering iron tip - bevel type T-1.6D

Bevel tip for soldering station type T-1.6D, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-01031
Index: LUT-01031
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53
  • Free shipping

Soldering iron tip - bevel type T-1C

Bevel tip for soldering station type T-1S, it works, among others, with stations: 936, 937, 803, 968, 995 etc.
Index: LUT-01029
Index: LUT-01029
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98
  • Free shipping

Ball Caster 3/4" - metal - Pololu 955

Metal ball in the bowl with a diameter of 0.75 inches, it is ideal to use to support the front of the two-wheeled robot.
Index: PLL-00475
Index: PLL-00475
Czas oczekiwania ok. 10-21 dni
Regular price €2.67 Price €2.67
  • Free shipping

Set of 140 wires for breadboards

A kit of 140 wires of different length, to connect the fields on the breadboards (test).
Index: KAB-00678
Index: KAB-00678
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53
  • Free shipping

Connecting cables female-male 20cm red - 10pcs

Set of 10 high quality connecting cables with a length of 20 cm in red.
Index: KAB-01400
Index: KAB-01400
Czas oczekiwania: ok. 10-30 dni
Regular price €1.60 Price €1.60
  • Free shipping

Products from the same category

Soldering station ZD98 - 48W

Soldering station with soldering iron. It has the ability to adjust the temperature in the range from 150 °C to 450 °C. The total power of 48 watts.
Index: LUT-08719
Index: LUT-08719
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.79 Price €12.79
  • Free shipping

Soldering fume absorber AKS-153 23W

The device removes fumes generating during soldering. It has two replaceable carbon filters. The absorption efficiency reaches 1 m3/min. Absorber is powered by mains voltage...
Index: LUT-05844
Index: LUT-05844
Czas oczekiwania: ok. 10-30 dni
Regular price €39.30 Price €39.30
  • Free shipping

Soldering station WEP 853D soldering iron, hotair with fan + power supply 15V/1A

The station has three main functions: hot air station and tip-based soldering iron, power supply 15V/1A, and RF signal tester. Temperature adjustment is available in the range...
Index: LUT-00908
Index: LUT-00908
In stock, shipping 24 hours!
(Check quantity)
Regular price €93.00 Price €93.00
  • Free shipping

Soldering station 995D

WEP 995D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W. The device is equipped with a PID microcontroller unit,  LCD display,...
Index: LUT-06363
Index: LUT-06363
In stock, shipping 24 hours!
(Check quantity)
Regular price €110.21 Price €110.21
  • Free shipping

Soldering station 2in1 hotair and grotto Zhaoxin 898D with a fan in flask

Grotto soldering iron with a heating power of 60 W and hotair in one. The total capacity of station - 760 W. The device has an adjustable temperature, standby mode and two LED...
Index: LUT-06274
Index: LUT-06274
In stock, shipping 24 hours!
(Check quantity)
Regular price €72.09 Price €72.09
  • Free shipping

Soldering station WEP 938D+ remembers settings 75W - two irons

Tip-based soldering station WEP 938D+ with a continuously adjustable temperature range from 100 °C to 480 °C.  The device is capable of connecting two soldering irons . It...
Index: LUT-08058
Index: LUT-08058
In stock, shipping 24 hours!
(Check quantity)
Regular price €77.91 Price €77.91
  • Free shipping

Soldering station hotair and tip-based WEP 992D with fan in iron - 700W

WEP 992D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W, used for soldering and desoldering of electronic components. The device is...
Index: LUT-06545
Index: LUT-06545
In stock, shipping 24 hours!
(Check quantity)
Regular price €101.14 Price €101.14
  • Free shipping

WEP 992D - Soldering station 2in1 hotair and soldering iron

Tip-based soldering iron and hot air iron in one. The total capacity of the station is 700 watts. The device has a PID controller, large and easy to read LCD display,...
Index: LUT-12653
Index: LUT-12653
In stock, shipping 24 hours!
(Check quantity)
Regular price €133.72 Price €133.72
  • Free shipping

Soldering station ZD-916 - 60W

Reliable and durable soldering and desoldering station made from high quality cells with capacity of 60 W. The device has a smooth regulation of the temperature. It allows for...
Index: LUT-08722
Index: LUT-08722
Czas oczekiwania: ok. 10-30 dni
Regular price €67.21 Price €67.21
  • Free shipping

Soldering Station WEP 936 NewDesign - 45W

Soldering station WEP 936 45 Wadjustable temperature range from 200 °C to 480 °C.
Index: LUT-03166
Index: LUT-03166
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.53 Price €24.53
  • Free shipping

Soldering station Elwik RT-24 80W

Grotto soldering station Elwik RT-24 with a total power of 80 watts with adjustable temperature from 100 °C to 420 °C. The device allows for the grotto to be grounded. The kit...
Index: LUT-07409
Index: LUT-07409
In stock, shipping 24 hours!
(Check quantity)
Regular price €76.51 Price €76.51
  • Free shipping

TS100 mobile soldering station - 65W

Electric mini soldering iron model TS100 , powered from 12 V to 24 V through a 5.5 / 2.5 mm DC socket port. Temperature can be adjusted between 100°C and 400°C . The...
Index: DNG-17748
Index: DNG-17748
Waiting time about 10-30 days
Regular price €68.60 Price €68.60
  • Free shipping