WEP 992DA+ hotair and soldering station + saving settings + fume extraction + compressor - 720W

Index: LUT-05037 EAN: 5907558240948

Device WEP 992DA+ is the soldering station on hotair and a grotto soldering iron (75 W), used for soldering and desoldering the electronic components. The station is equipped with microprocessor with precise PID controller, which checks the operating parameters and adjusts them to the preset values.

WEP 992DA+ hotair and soldering station + saving settings + fume extraction + compressor - 720W
€203.90
€165.77 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: WEP

Description

Device WEP 992DA+ is the soldering station on hotair and a grotto soldering iron (75 W). The device is equipped with a microcontroller with implemented PID controller, which checks the operating parameters and adjusts them to the preset values.

 

Presentation of the soldering station WEP 992DA+.

 

Among other models 992D+, highlighted are:

  • 3 programmes of work- station has the possibility to memorize 3 of the work programme for hot air and the flask. Depending on type of works, on assembly or disassembly, we set the appropriate program.
  • The operation of the hotair in automatic and manual mode:
    • automatic- when you put the flask away, the system will turn off the heat and will cool the flask to a safe temperature
    • manual- when you put the flask away, the system continues to heat a heating element, before finishing the work, it is recommended to switch to auto-mode.
  • The function of temperature correction depending on external parameters
  • Work in C/F mode - the possibility to change the units, in which temperature is displayed.
  • Sleep function for grotto soldering iron- if the flask is not used by the earlier set time (0 - 99 minutes) the system switches it to the sleepmode, that is, cooling it to a temperature of 200°C, which ensures longer service life of the device.
  • Grotto flaskwith a heating element, fast heating up itself, keeping a stable temperature, which is electrostatically safe.
  • Ehaust ventilation -station has the possibility to extract of harmful fumes.

 

 

Specification

  • Power supply: from 220 V to 240 V / 50 Hz (network)
  • Power consumption: 720 W
  • The station is controlled through a microcontroller that provides high stability of work
  • The device has a PID controller
  • Compact design with large and readable LCD display
  • The cooling function

 

  • Soldering Iron Hotair:
    • Blowing of air is through the compressor inside the station
    • Air-flow: up to 28 l/min
    • Smooth adjustment of temperature in the whole range
    • Adjustable temperature of hot air: 100 °C to 480 °C
    • Temperature stability: +/-1 °C
    • LCD display showing actual power of air-flow
    • Manual / automatic operation mode 
    • Protection before reaching too high temperature and informing the alarm
    • Cable with length of the flask: up to 90 cm

 

  • Grotto Soldering Iron 
    • Adjustable temperature of th seoldering tip: 200 °C to 480 °C
    • Temperature stability: +/- 1 °C
    • Peak power of the soldering flask iron: from 72 to 75 W
    • The resistance in relation to grounding: up to 2 Ω
    • Capacity in relation to grounding: up to 2 mV
    • The system ESD safe
    • Cable length of the flask: up to 100 cm
    • Sleep mode: enabled after idle operation for 0-99 minutes

 

Includes:

  • Station WEP 992DA+ with exhaust ventilation
  • Stand the for the hotair flask
  • Set of nozzles:
    • round with a diameter of 2.5 mm
    • round with a diameter of 4.4 mm
    • round with a diameter of 6 mm
    • round with a diameter of 9 mm
    • square 12x12 mm
  • Stand for the grotto flask along with a cleaning sponge
  • The 908B grotto flask with tip T-B with exhaust ventilation
  • A gripper for lifting the chips
  • Power cable

 

First run

  • After delivery of equipment, it should be not immediately started.
  • Equipment must remain about 12 hours at room temperature before switching on.
  • All applications for damages caused by the premature commissioning of the equipment. will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the source of air supply is compressor. These screws are marked in red (1 or 3 screws depending on model).

 

Our range of accessoriesfor soldering:

 

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 720 W
Temperature 200 - 480 °C
Solder - Fan no
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital
Laboratory of the future Compatible
Package width 33 cm
Package height 20 cm
Package depth 27 cm
Package weight 5 kg

Be the first to ask a question about this product!

Product reviews

WEP 992DA+ hotair and soldering station + saving settings + fume extraction + compressor - 720W

4.8/5

Average grade

4

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Sebastian 29.04.2023 Confirmed purchase Translated review
device is great. No German instructions included, that's a bit thin.
Łukasz 16.12.2022 Confirmed purchase Translated review
neat, solid, it's been used for a short time but for now it does its job
Václav 23.04.2023 Confirmed purchase
Martina 30.03.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: