Soldering station 853AAA - 3 in 1
Soldering station 853AAA - 3 in 1
Soldering station 853AAA - 3 in 1 - zdjęcie 1
Soldering station 853AAA - 3 in 1 - zdjęcie 2

WEP 853AAA 3in1 soldering station - preheater + soldering tip + hotair with fan in the flask

Index: LUT-06364 EAN: 5907558240887
Ask a question

Soldering station which is a combination of hotair, soldering iron and heater. It has a total capacity of 1270 W. It is equipped in e.g. a convenient temperature regulation, cooling system after finishing work, ESD-safe, system of error detection. The parameters of work are controlled using PID controller and displayed on an easily readable LCD display.

WEP 853AAA 3in1 soldering station - preheater + soldering tip + hotair with fan in the flask
€203.90
€165.77 tax excl.
Check quantity
Available
Shipping in 24 hours
Free shipping
30 days to return
PayPal payment
Check quantity
Manufacturer: WEP

Description

Soldering station which is a combination of hotair, soldering iron and heater. It has a total capacity of 1270 W. It is equipped in e.g. a convenient temperature regulation, cooling system after finishing work, ESD-safe, system of error detection. The airflow is implemented using a brushless motor that is in the flask. The parameters are controlled using PID-controller and displayed on an easily readable LCD display.

 

Stacja lutownicza 3w1 WEP 853AAA - hotair + grotowa + preheaterSoldering station which is a combination of hot air, a soldering iron and heater.

 

Specification
  • Supply voltage: 230 V / 50 Hz (network)
  • Power: 1270 W
  • LCD display
  • Control through PID
  • Rapid heating to a predetermined temperature
  • Cooling system after finishing work
  • Convenient adjustment of airflow
  • ESD-safe
  • Safe soldering of elements sensitive to temperature: QFP, PLCC, BGA

 

Hotair Soldering Iron

  • Adjustable temperature of hot air from 100 °C to 480 °C
  • Temperature stability +/-1 °C
  • The source of airflow: the fan in the flask, based on the brushless motor
  • Airflow up to 130 l/min

 
Soldering Iron Grotowa

  • Adjustable temperature of soldering tip: 200 °C to 480 °C
  • Temperature stability +/- 1 °C
  • Soldering iron power: 75
  • Voltage of ground: up to 2 mV
  • Ground resistance: up to 2 Ω

 

Heater

  • Power consumption: 600 To
  • Temperature stability +/- 2 °C
  • The surface of the heater: 120 x 120 mm
  • Maximum holder width: 170 mm

 

Set includes:
  • Soldering station, heater WEP 853AAA
  • The flask hotair
  • Mount for the flask hotair
  • The grotto bulb 
  • Mount for the grotto flask with sponge for cleaning the soldering tip
  • Nozzle set:
    • round with a diameter of 4.4 mm
    • round with a diameter of 7 mm
    • round with a diameter of 9 mm
    • square 12 x 12 mm
  • A gripper for lifting chips
  • Power cable
  • The user manual

 

First run

  • After delivery of equipment, it should not be immediately started.
  • Equipment must remain about 12 hours at room temperature before switching on.
  • All applications for damages caused by the premature commissioning of the equipment, will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the source of air supply  is compressor. These screws are marked in red (1 or 3 screws depending on model).

 

Note

Heating elements (heaters) and the tips are not subject to warranty either expressed or implied, and replacing them is chargeable.

 

Our range has alsoaccessoriesfor soldering:

 

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 1270 W
Temperature 200 - 480 °C
Solder - Fan yes
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital
Package width 38 cm
Package height 18.5 cm
Package depth 35 cm
Package weight 5.15 kg
Send us your question

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: