Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W
Cyfrowa stacja 937D - 60W - zdjęcie 1
Cyfrowa stacja 937D - 60W - zdjęcie 2
Cyfrowa stacja 937D - 60W - zdjęcie 3

Soldering station 2in1 hotair and tip-based WEP 852D+

Index: LUT-00909 EAN: 5907558240085

Tip-based soldering iron and hot air iron in one. The device has a compressor, a smooth temperature control and two LED displays.

€60.23
€48.97 tax excl.
Czas oczekiwania: ok. 10-30 dni
Waiting for delivery
30-day returns
Manufacturer: WEP

Description of product: Soldering station 2in1 hotair and tip-based WEP 852D+

The station has built-in dual LED display informing you of a preset temperature of hot air and of the soldering iron. The device also has a power adjustment of Hotair flow. The flow of air through the compressor, which ensures long, trouble free operation, stability of power supply.


WEP 852D+ fan has an antistatic design ESD Safe to protect the solder elements from damage. Wide application and low failure rate of the device gives it a leading position on the market of soldering station.

 

Hotair Soldering Iron

  • Adjustable temperature hot air from 100 °C to 480 °C
  • LED display that indicates the temperature of the hot air
  • Air flow up to 24 l/min
  • Adjustable air supply with regulator
  • System ESDSafe

 

Soldering Iron Tip-based

  • Temperature adjustmentot the tip from 100 °C to 480 °C
  • Ground voltage <2mV
  • Ground resistance <2ohm
  • Soldering iron power 60 W

 

Includes:

  • Soldering station WEP 852D+ fan
  • Stand for the tip-based iron along with a cleaning sponge
  • Stand for the hotair iron
  • Power cable
  • A gripper for lifting circuits
  • The user manual
  • Set of nozzle:
    • Round nozzle with a diameter of 5 mm
    • Round nozzle with a diameter of 7 mm
    • Round nozzle with a diameter of 9 mm

 

First run

  • Youi should not run the device immediately after delivery.
  • Equipment must remain for about 12 hours at room temperature before switching on.
  • All complaints caused by running of the equipment too soon will be denied.
  • You must completely remove the screw/screws from the bottom station if the source of air supply is the compressor. These screws are marked in red (1 or 3 screws depending on model).

Our range of accessories for soldering:

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 60 W
Temperature 100 - 480 °C
Solder - Fan no
Solder - real temperature reading yes
Solder - Hotair yes
Solder - Type A/C digital

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.91 Price €0.91

Tip cleaner for soldering tools with stand

Soldering tips cleaner made from brass chips.
Index: LUT-00613
Index: LUT-00613
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.86 Price €4.86

Solder sucker for tin OD-25

A device for removing tin excess. It has a Teflon tip, metal case with 20 mm in diameter. Length of the device is 228 mm.
Index: LUT-00630
Index: LUT-00630
Unavailable
Regular price €4.63 Price €4.63

Sponge for cleaning soldering tips - round - 5pcs.

Round sponge for cleaning the soldering iron blade with a diameter of about 50 mm.
Index: LUT-00638
Index: LUT-00638
Waiting time: about 10-30 days
Regular price €1.84 Price €1.84

Customers who bought this product also bought:

Soldering tin in tube 16g / 1.00mm

Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.
Index: NSZ-00309
Index: NSZ-00309
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.14 Price €1.14

Rosin 40g

Flux with the addition of activators to facilitate soldering.
Index: NSZ-00169
Index: NSZ-00169
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.65 Price €0.65

De-solder tool ZD-190

A device to drain excess tin. Model ZD-190 has a metal body with a diameter of 20 mm and replaceable tips. The length of the device is 190 mm.
Index: LUT-00228
Index: LUT-00228
Unavailable
Regular price €1.51 Price €1.51

Sponge for cleaning soldering tips - round - 5pcs.

Round sponge for cleaning the soldering iron blade with a diameter of about 50 mm.
Index: LUT-00638
Index: LUT-00638
Waiting time: about 10-30 days
Regular price €1.84 Price €1.84

AVR microcontroller - ATmega32A-AU SMD

Popular microcontroller AVR from ATmel in a case soldered on surface (SMD).
Index: UCC-00160
Index: UCC-00160
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.28 Price €2.28

Quartz resonator 16MHz - UC49 - SMD - low

The quartz resonator in a small case for surface mounting (SMD).
Index: PAS-00308
Index: PAS-00308
Czas oczekiwania: ok. 10-30 dni
Regular price €0.16 Price €0.16

Set of SMD resistors 0402 - 800pcs.

A set of 16 resistor values with 5 % tolerance, 50 pieces each. Elements in SMD0402 housing.
Index: PAS-00642
Index: PAS-00642
Unavailable
Regular price €1.37 Price €1.37

Electrolytic capacitor 22uF/35V SMD - 5pcs

Electrolytic capacitor SMD, capacitance: 22 uF, maximum voltage: 35 V, max. operating temperature: 85 °C. Price for 5 PCs.
Index: UCC-00260
Index: UCC-00260
Unavailable
Regular price €0.26 Price €0.26

Electrolytic capacitor 220uF/35V SMD

SMD electrolytic capacitor, capacity: 220 uF, voltage: 35V, maximum operating temperature: 85°C. Price for 5 pieces.
Index: UCC-00259
Index: UCC-00259
Unavailable
Regular price €0.07 Price €0.07

Breadboard - 400 holes

Breadboard is used for creating and testing electronic circuits without the need for soldering. Version with 400 holes, the size of 82.5 x 53 mm.  Stripes (blue and red) help...
Index: PLY-00056
Index: PLY-00056
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

AVR microcontroller - ATmega32A-PU - DIP

Popular microcontroller AVR from ATmel in a case DIP40.
Index: UCC-00159
Index: UCC-00159
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.79 Price €5.79

Sharp GP2Y0D340K - digital distance sensor 40cm

Sharp GP2Y0D340K digital distance sensor detects objects within a range of 40 cm.
Index: SES-00247
Index: SES-00247
Unavailable
Regular price €11.40 Price €11.40

Products from the same category

Soldering station ZD98 - 48W

Soldering station with soldering iron. It has the ability to adjust the temperature in the range from 150 °C to 450 °C. The total power of 48 watts.
Index: LUT-08719
Index: LUT-08719
Czas oczekiwania: ok. 10-30 dni
Regular price €12.79 Price €12.79

Soldering station WEP 853D hotair with fan + power supply 15V/1A

The station has three main functions: hot air station and tip-based soldering iron, power supply 15V/1A, and RF signal tester. Temperature adjustment is available in the range...
Index: LUT-00908
Index: LUT-00908
In stock, shipping 24 hours!
(Check quantity)
Regular price €113.72 Price €113.72

Soldering station 2in1 hotair and tip-based Zhaoxin 852D compressor - 330W

Tip-based soldering iron with a heating capacity of 60 W and hot air iron in one. The total capacity of the station is 330 W . The device has a smooth adjustment of...
Index: LUT-06275
Index: LUT-06275
In stock, shipping 24 hours!
(Check quantity)
Regular price €74.19 Price €74.19

Soldering station WEP 937D - 40W

Grotto WEP soldering station 937D with power of 40W and adjustable temperature from 200 °C to 480 °C. It has a LED display which shows the set temperature of the soldering tip.
Index: LUT-00658
Index: LUT-00658
Czas oczekiwania: ok. 10-30 dni
Regular price €23.02 Price €23.02

Soldering station 2in1 hotair and grotto Zhaoxin 898D with a fan in flask

Grotto soldering iron with a heating power of 60 W and hotair in one. The total capacity of station - 760 W. The device has an adjustable temperature, standby mode and two LED...
Index: LUT-06274
Index: LUT-06274
Czas oczekiwania: ok. 10-30 dni
Regular price €72.09 Price €72.09

Soldering station WEP 938D+ remembers settings 75W - two irons

Tip-based soldering station WEP 938D+ with a continuously adjustable temperature range from 100 °C to 480 °C.  The device is capable of connecting two soldering irons . It...
Index: LUT-08058
Index: LUT-08058
In stock, shipping 24 hours!
(Check quantity)
Regular price €76.51 Price €76.51

Soldering station hotair and tip-based WEP 992D with fan in iron - 700W

WEP 992D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W, used for soldering and desoldering of electronic components. The device is...
Index: LUT-06545
Index: LUT-06545
In stock, shipping 24 hours!
(Check quantity)
Regular price €87.21 Price €87.21

Soldering station 995D

WEP 995D soldering station with hot air iron and tip-based soldering iron with a capacity of 75 W. The device is equipped with a PID microcontroller unit,  LCD display,...
Index: LUT-06363
Index: LUT-06363
In stock, shipping 24 hours!
(Check quantity)
Regular price €97.67 Price €97.67

Soldering fume absorber AKS-153 23W

The device removes fumes generating during soldering. It has two replaceable carbon filters. The absorption efficiency reaches 1 m3/min. Absorber is powered by mains voltage...
Index: LUT-05844
Index: LUT-05844
Czas oczekiwania: ok. 10-30 dni
Regular price €39.30 Price €39.30

Soldering station Zhaoxin 858D - 700W

Hot air soldering iron  with the power of 700 W, with LED display. The device features a compact housing which takes up little space. The station has adjustable temperature...
Index: LUT-07154
Index: LUT-07154
In stock, shipping 24 hours!
(Check quantity)
Regular price €40.70 Price €40.70

TS100 mobile soldering station - 65W

Electric mini soldering iron model TS100 , powered from 12 V to 24 V through a 5.5 / 2.5 mm DC socket port. Temperature can be adjusted between 100°C and 400°C . The...
Index: DNG-17748
Index: DNG-17748
Waiting time about 10-30 days
Regular price €68.60 Price €68.60

„Soldering station hotair and tip-based 2in1 Yihua 902A - 700W

Soldering iron and hot air in one. The total capacity of the station is 700 watts. The device has an adjustable temperature and a standby mode.
Index: LUT-08221
Index: LUT-08221
Czas oczekiwania: ok. 10-30 dni
Regular price €43.95 Price €43.95