• EOL

Open746I-C Package B, STM32F7 Development Board - Waveshare 11475

Index: WSR-08360 EAN: 5904422336424

Development board with the Core module 746I and touch screen with a diagonal 7". The set also includes a lot of sensors, i.a.: ethernet module, audio encoder, microSD card reader, camera, sensor 10 DOF IMU and others.

Open746I-C Package B, STM32F7 Development Board - Waveshare 11475
€167.50
€136.18 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare

Attention!

The product has been discontinued. Check other products in category.

Description

Development board with the Core module 746I and touch screen with a diagonal 7". The set also includes a lot of sensors, i.a.: ethernet module, audio encoder, microSD card reader, camera, sensor 10 DOF IMU and others.

The kit supports further expansion with additional components. It is the perfect solution for understanding many applications working with microcontrollers STM32.

What is on the Baseboard Open7XXI-C?

  1. Connector to connect the module Core746I
  2. Connector to connect the Arduino shields
  3. DCMI interfaceto connect the camera
  4. 8-bit FMC interface: for connecting, for example, NandFlash
  5. ULPI interface: for connecting USB devices with high speed
  6. Interface LCD 1: for the connection of screens 7" and 10.1"
  7. Interface LCD 2: to connect the screens of 4.3 "
  8. SAI1 interface: for connecting audio modules, for example, UDA1380
  9. ICSP interface: like in Arduino
  10. Interface SPI1 / SPI2
  • to connect SPI devices, such as SD cards, MP3 modules, etc.
  • to connect converters AC / CA (SPI1 has the alternative function AC / CA)
  • Ethernet Interface
  • Interface I2S2 / I2S3 / I2S1: to connect audio modules
  • Connector USART1: Converter CP2102
  • QUADSPI interface: 4-wire SPI to connect Flash modules, for example, W25QXX
  • SDMMC interface: to connect microSD modules
  • The USART3 interface: for connection to RS232, RS485, USB-232, etc.
  • CAN2 interface: for connecting CAN modules
  • CAN1 interface: for connecting CAN modules
  • Interface I2C1 / I2C4: to connect I2C extensions
  • MCU connectors: leads of the main module
  • Connector 5 V DC
  • Connectors of outputs / inputs of the voltages 5 V and 3.3 V
  • Power switch: 5 V or USB power via USART1
  • CP2102 chip: USB - UART converter
  • LED diodes: show the status of the device
  • 5-position joystick
  • Button WAKE UP: wakes the system up from the sleep mode or works as a normal button
  • The Reset Button
  • Jumper USART1
  • Jumper LED
    • compact, uses the default pins I/O in the sample code
    • disabled, allows you to use any pins I/O with cables
  • Jumper KEY
    • compact, uses the default pins I/O in the sample code
    • disabled, allows you to use any pins I/O with cables
  • Jumper Arduino
    • upper compact pins A4 and A5 are used as functions A/C
    • the lower compact pins A4 and A5 are used as I2C

    Detailed materials can be found inthe user guide.

    What is on the board Core 746I?

    STM32F7 - rozkład wyprowadzeń

    1. Processor STM32F746IGT6
    2. IS42S16400J: SDRAM memory, 1 Mb x 16 b x 4 banks (64 Mb)
    3. MIC2075: built-in power management USB
    4. AMS1117-3.3: voltage regulator 3.3 V
    5. The quartz resonator 8 MHz
    6. The quartz resonator 32.768 kHz for internal RTC with calibration
    7. The RESET button
    8. Led VBUS
    9. Led informing about your power
    10. Power switch: from USB or 5VIN pin
    11. The choice of boot mode: for configuring the BOOT0 pin
    12. Interface JTAG / SWD: for debugging and programming
    13. MicroUSB connector
    14. Led pins of CPU
    15. The power jumper
    • VBAT: compact - power system, opened - external power supply, e.g. battery
    • VREF: compact - connecting VREF+ to VCC, opened - connecting VREF+ to the other pin via additional cable
  • Jumper OTG
    • Compact: using USB HOST/OTG
    • Open: disconnecting from I/O ports

    The set

    The set includes:

     

    L. p. Photo Description
    1 Baseboard Open746I-C.
    2 7 " touch screen display.
    3

    DP83848 Ethernet module.

    4 Module USB High Speed USB3300.
    5 Sound module UDA1380.
    6

    A card reader microSD.

    7 Camera OV2640.
    8 The data module W25QXX.
    9 Module IMU 10 DOF.
    10 SN65HVD230 CAN module - 2 PCs.
    11 Converter AC / CA.
    12 Cable USB - miniUSB.
    13 Adapter, socket USB - connector miniUSB.
    14 USB - microUSB cable 
    15 Adapter, socket USB - connector microUSB.
    16 4-pin and 2-pin femalewires.
    17 Ethernet cable Patchcord 1 m.
    18 Power Adapter 5 V / 2 A.
    19

    Connecting tape for the LCD screen.
    20

    A set of bolts and distances for

    fixing the screen.

     

     

     

    Test 3
    Package width 25.6 cm
    Package height 7.1 cm
    Package depth 20.2 cm
    Package weight 0.912 kg

    Be the first to ask a question about this product!

    Customers who bought this product also bought:

    Products from the same category: