Cyfrowy termometr DS18B20 + DIP
Cyfrowy termometr DS18B20 + DIP
Cyfrowy termometr DS18B20 + DIP - zdjęcie 1
Cyfrowy termometr DS18B20 + DIP - zdjęcie 2

Temperature sensor DS18B20+ module - blue

Index: MOD-01506

Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 V

€2.77
€2.25 tax excl.
Czas oczekiwania: ok. 10-30 dni
Waiting for delivery
30-day returns
Manufacturer: OEM

Description

Module with digital temperature sensor DS18B20+ having a communication interface 1-wire. Pins are the popular goldpin connectors to connect the sensor to the main unit (e.g. Raspberry Pi, STM32Discovery or Arduino) via wires.

 

The product is compatible with Arduino and Raspberry Pi

User guide for Arduino is available at this address.

 

Specification

  • Supply voltage: from 3.0 V to 5.5 V
  • Measurement range: from -55 °C to 125 °C
  • Accuracy: +/- 0,5 °C in the range from -10 °C to 85 °C
  • Resolution: 9 to 12 bits
  • Module dimensions: 22 x 10 mm

 

 

Scheme of powering the module with the sensor DS18B20+

On the board, except the thermometer, is a LED, indicating the correct supply connection, and a resistor of 10  kΩ pulling-up the data lines to the supply voltage VCC.

 Schemat modułu z czujnikiem temperatury DS18B20+.

Diagram of the module with temperature sensor DS18B20+.

 

 

Interface 1-wire
Sensor - Temperature to 125 °C
Sensor - Temperature accuracy +/- 0.5 °C
Sensor - Temperature from -55 °C - 125 °C
Test 3

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
Czas oczekiwania ok. 10-30 dni
Regular price €1.60 Price €1.60

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.16 Price €24.16

ATmega8 mini module - microBOARD-M8

Module microBOARD-M8-miniature set of run with the host microcontroller ATmega8A.
Index: MOD-00970
Index: MOD-00970
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.95 Price €6.95

Arduino Uno Rev3 - module A000066

The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.40 Price €21.40

Customers who bought this product also bought:

Plug WTP2C - white

A straight plug for mounting on the cable. It has the handle facilitating the pulling out of the slot. 
Index: KAB-08177
Index: KAB-08177
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.58 Price €0.58

Plug WTPV - white

Angular flat plug for mounting on the cable. It has the ground. It is designed for installation in hard to reach places.
Index: KAB-08179
Index: KAB-08179
Czas oczekiwania: ok. 10-30 dni
Regular price €1.37 Price €1.37

AltIMU-10 v5 - gyroscope, accelerometer, compass and I2C 3-5V altimeter - Pololu 2739

Sensor for measuring acceleration, magnetic field, angular speed and altitude. It is a combination of 3-axis accelerometer and gyroscope LSM6DS33, LIS3MDL magnetometer and...
Index: PLL-05728
Index: PLL-05728
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.44 Price €20.44

IMU 10DoF - MPU9255 + BMP280 - 3-axis accelerometer, gyroscope, magnetometer and barometer - Waveshare 12476

The sensor is a combination of 3-axis gyro, accelerometer and compass. Allows you to measure acceleration, magnetic field and angular velocity in the configurable ranges....
Index: WSR-08298
Index: WSR-08298
In stock, shipping 24 hours!
(Check quantity)
Regular price €15.33 Price €15.33

MMA8452Q 3-axis I2C digital accelerator module - SparkFun SEN-12756

Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g or ±8 g. Powered with the voltage of 1.95 V - 3.6 V, it is characterized by small size, low energy...
Index: SPF-01771
Index: SPF-01771
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.88 Price €9.88

ADXL345 3-axis I2C / SPI digital accelerator - module

Sensor for measuring acceleration in three axes in the range +/- 16 g. The module is powered with the voltage from 3 to 5 V, it has the voltage regulator and is communicating...
Index: MOD-01912
Index: MOD-01912
Czas oczekiwania: ok. 10-30 dni
Regular price €2.30 Price €2.30

BMA220 3-axis I2C digital accelerator - DFRobot module

Sensor for measuring acceleration in three axes in the range: ± 2 g, ±4 g, ±8 g / ±16 g. Powered with the voltage of 2.0 V to 3.6 V, it is characterized by small size, low...
Index: DFR-02987
Index: DFR-02987
Czas oczekiwania: ok. 10-30 dni
Regular price €4.64 Price €4.64

DFRobot Gravity - tilt sensor

A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84

LSM6DS3 3-axis accelerometer and gyroscope I2C/SPI module - SparkFun SEN-13339

Sensor for measuring acceleration and angular velocity in three axes. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the I2C or SPI bus, it...
Index: SPF-04573
Index: SPF-04573
Czas oczekiwania: ok. 10-30 dni
Regular price €13.00 Price €13.00

LSM6DS33 - 3-axis accelerometer and I2C / SPI gyroscope - Pololu 2736

Sensor allows you to measure 6 variables: acceleration X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the...
Index: PLL-05331
Index: PLL-05331
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.67 Price €10.67

Triple Axis Accelerometer Breakout - LIS3DH - SparkFun SEN-13963

Sensor LIS3DH is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C or SPI bus, it is powered from a...
Index: SPF-08064
Index: SPF-08064
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.02 Price €6.02

JST - BEC socket for Li-Pol batteries

BEC (JST) slot is mainly used for connections on the cables powering the rechargeable battery, for example, lithium-polymer.
Index: UCC-01320
Index: UCC-01320
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.21 Price €0.21

RandomCategoryProducts

Cover for temperature sensor DS18B20 / LM35 - 6x50 mm

Shield for temperature sensor DS18B20, LM35 and others in the TO92 case.
Index: AKS-10612
Index: AKS-10612
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.46 Price €0.46

Cover for temperature sensor DS18B20 / LM35 - 6x60mm

Shield for temperature sensor DS18B20, LM35 and others in the TO92 case.
Index: AKS-10613
Index: AKS-10613
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.69 Price €0.69

NTC 110 100kΩ thermistor 5%

The NTC 110 thermistor with a resistance of 100 KΩ and a tolerance of 5 %.
Index: SES-04952
Index: SES-04952
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.12 Price €0.12

NTC thermistor 110 22kΩ 5%

The NTC 110 thermistor with a resistance of 22 kΩ and a tolerance of 5 %.
Index: SES-04950
Index: SES-04950
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.12 Price €0.12

DS18B20 temperature sensor + 4,7kΩ resistors

This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.
Index: SES-09821
Index: SES-09821
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.51 Price €1.51

Temperature sensor LM35 + wire - Iduino SE030

The module with analog temperature sensor LM35. The measuring range is from -55°C to 150°C, the accuracy is 0.5°C, the supply voltage 5 V. The board has 3-pin connector,...
Index: OST-14248
Index: OST-14248
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

NTC 110 1kΩ thermistor 5%

The NTC 110 thermistor with a resistance of 1 KΩ and a tolerance of 5 %.
Index: SES-04946
Index: SES-04946
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.12 Price €0.12

NTC 110 5kΩ thermistor 5%

The NTC 110 thermistor with a resistance of 5 KΩ and a tolerance of 5 %.
Index: SES-04948
Index: SES-04948
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.08 Price €0.08

NTC thermistor 110 47kΩ 5%

The NTC 110 thermistor with a resistance of 47 kΩ and a tolerance of 5 %.
Index: PAS-04951
Index: PAS-04951
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.08 Price €0.08

Cover for temperature sensor DS18B20 / LM35 - 6x30 mm

Shield for temperature sensor DS18B20, LM35 and others in the TO92 case.  Items are sold in sets of 10 pieces.
Index: KAB-09460
Index: KAB-09460
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.19 Price €4.19
  • On sale!

Waterproof probe with temperature sensor DS18B20 - 1m - Iduino 3DS024

High quality waterproof probe based on DS18B20 chip. The housing is made of stainless steel and has dimensions of 50 x 6 mm. Power supply voltage is from 3 V to 5 V. The cable...
Index: OST-15245
Index: OST-15245
Available, 24h shipping!
(Check quantity)
Regular price €2.31 Price €2.31

BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V - soldered connectors

Very easy to use temperature, humidity and pressure sensor. The module is powered by 3.3 V and can also communicate via I2C or SPI interface . Sensors of this type are...
Index: ZES-16534
Index: ZES-16534
Available, 24h shipping!
(Check quantity)
Regular price €10.44 Price €10.44