- zdjęcie 1
 - zdjęcie 2
 - zdjęcie 3
 - zdjęcie 4

Converter USB-UART FTDI 5V miniUSB - SparkFun DEV-09716

Index: SPF-01964

Small converter enables the connection between serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The system is based on reliable system FT232RL. The distance between connectors is suitable for modules from Arduino Pro series.

€15.09
€12.27 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: SparkFun

Description

Converter enables the connection between two popular serial interfaces USB and UART. The module is based on the reliable system FT232RL (documentation) made by the company FTDI, ensures stable operation and cooperation with the most popular operating systems. To connect the system to the computer you need a cord with a mini-usb.

 

The module can be used to exchange data between the computer and the microcontroller system or for programming electronic sets from remote serial interface, e.g. Arduino or STM32Discovery.

 

 Konwerter USB-UART FTDI 5V - SparkFun DEV-09716 Konwerter USB-UART FTDI 5V - SparkFun DEV-09716

 

SparkFun FTDI was developed with programming Arduino in mind. It has automatic restart, and the distance between connectors is suitable for modules Arduino Pro: goldpin female 6 x 1.

 

Inputs

The module has terminals in the form of female corner connectors goldpin with signals Rx, Tx, DTR, CTS and power supply lines: PWR (5 V) and GND. The board consists of the status LEDs (TX and RX), allowing you to monitor the status of communications. The converter connects to the computer using a cable via USB.

The system can be configured so that it also worked with voltage of 3.3 V. This requires soldering the jumper on the back side of the board.

 

 

Converter - chip FT232RL
Converter - Socket miniUSB
Converter - Interface UART

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

MiniUSB B - A cable Esperanza EB-132 - 1.8m

USB cable (type A) - miniUSB cable (type B) used to connect your computer to devices equipped with mini USB-B sockets. It is 180 cm long.
Index: KAB-01090
Index: KAB-01090
Unavailable
Regular price €1.14 Price €1.14

Arduino Pro 328 module - 5V/16MHz - SparkFun DEV-10915

Module based on Arduino Uno with ATmega328 system, is characterized by small size and low profile. It has 32 KB of Flash memory, 2 KB of RAM 14 digital of I/os, 6 of which can...
Index: SPF-01593
Index: SPF-01593
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.42 Price €17.42

Pro Micro - 5V/16MHz - Atmega32u4 module - SparkFun DEV-12640

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01594
Index: SPF-01594
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.88 Price €17.88

Customers who bought this product also bought:

HP Motor with 50:1 Gear - doublesided shaft - Pololu 2213

Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm). It has an extended shaft for mounting speed sensors.
Index: PLL-00037
Index: PLL-00037
Available, 24h shipping!
(Check quantity)
Regular price €16.16 Price €16.16

Breadboard - 400 holes

Breadboard is used for creating and testing electronic circuits without the need for soldering. Version with 400 holes, the size of 82.5 x 53 mm.  Stripes (blue and red) help...
Index: PLY-00056
Index: PLY-00056
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

Stand for DIP28 narrow - 5pcs

Stand for chip DIP 28. Price for 5 pieces.  
Index: UCC-00090
Index: UCC-00090
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.28 Price €0.28

Stand for DIP8 - 5pcs

Stand for chip DIP 8-pin. Price for 5 pieces.
Index: UCC-00092
Index: UCC-00092
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.23 Price €0.23

Stand for DIP40 - 5pcs

Stand for a wide IC DIP 40 pin. Price for 5 pieces.
Index: UCC-00094
Index: UCC-00094
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.58 Price €0.58

Gray ribbon cable (50 cm) IDC raster 1.27mm

IDC 10-wire ribbon cable. Raster: 1.27 mm.
Index: KAB-00136
Index: KAB-00136
Unavailable
Regular price €0.23 Price €0.23

AVR microcontroller - ATmega32A-PU - DIP

Popular microcontroller AVR from ATmel in a case DIP40.
Index: UCC-00159
Index: UCC-00159
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.79 Price €5.79

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.37 Price €1.37

Rosin 40g

Flux with the addition of activators to facilitate soldering.
Index: NSZ-00169
Index: NSZ-00169
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.65 Price €0.65

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.91 Price €0.91

Battery storage case for 3 packs AA (R6) with cover and switch

Basket with cover and switch for three AA batteries (large fingers).
Index: AKC-00174
Index: AKC-00174
Available, 24h shipping!
(Check quantity)
Regular price €0.58 Price €0.58

Products from the same category

Converter RS232 - UART with connector DB9 - SP3232 3.3V / 5V - Waveshare 3965

Converter of serial interface RS232 to standard UART with 9-pin D-SUB connector. Control system is a popular SP3232. The module operates with a supply voltage range from 3.0 V...
Index: WSR-04475
Index: WSR-04475
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.56 Price €2.56

FT232RL SP-880 - USB converter - RS232 COM +/-6V with DB9 connector - Adafruit 18

Adapter on 140 cm cable allows you to connect devices with RS232 connector to the computer through the USB connector. The module appears to the operating system as a virtual...
Index: ADA-04371
Index: ADA-04371
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.28 Price €19.28

UART Converter - RS485 3.3V - ARK / RJ11 - Waveshare 4777

Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...
Index: WSR-04496
Index: WSR-04496
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

USB-UART FTDI 3.3/5V converter for USB cable

The converter allows for communication between USB and UART interfaces. It allows you to exchange data between a PC and a board with a microcontroller. The module includes a...
Index: MOD-02040
Index: MOD-02040
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.05 Price €9.05

MAX485 transceiver RS485 - DIP - 5pcs.

The circuit used to convert RS-485 port voltage to TTL standard. Circuit in a DIP8 threaded housing.
Index: UCC-07693
Index: UCC-07693
Available, 24h shipping!
(Check quantity)
Regular price €3.42 Price €3.42

M5Atom Tail485 - RS485 - TTL adapter for M5Atom development modules

Tail485 is an RS485 converter dedicated to M5Atom development modules. It allows to convert RS485 signal to TTL . RS485 is a standard defining characteristics of...
Index: MSS-17981
Index: MSS-17981
Available, 24h shipping!
(Check quantity)
Regular price €6.49 Price €6.49

USB adapter for female cables with USB-UART converter PL2303 - Waveshare 7965

The adapter allows you to connect a USB to many different modules, with built-in converter USB to UART PL2303. Completed with female wire connectors. The system is compatible...
Index: WSR-04470
Index: WSR-04470
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.21 Price €2.21

CP2104 USB-UART Converter - Pololu 1308

The converter enables communication between two popular USB and UART serial interfaces. It allows for data exchange between the computer and microcontrollers and uses CP2104...
Index: PLL-01896
Index: PLL-01896
Available, 24h shipping!
(Check quantity)
Regular price €10.91 Price €10.91

RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882

Shield for Raspberry Pi, version 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230  which allows communication between CAN and SPI and the SP3485 system that enables...
Index: WSR-12532
Index: WSR-12532
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.65 Price €9.65

MSX FT232RL - USB-UART FTDI 3.3 / 5V converter

The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...
Index: MOD-01611
Index: MOD-01611
Czas oczekiwania: ok. 10-30 dni
Regular price €8.35 Price €8.35

SN65HVD230 CAN Board - Waveshare 3945

The module is based on the SN65HVD230 system that allows you to connect the microcontroller to the CAN bus. Communication is via the serial interface - RX, TX. It works with a...
Index: WSR-06960
Index: WSR-06960
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.07 Price €4.07

USB-UART FTDI 5V converter on 1.9m USB cable - SparkFun DEV-09718

The converter enables the connection between serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...
Index: SPF-11394
Index: SPF-11394
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.19 Price €17.19