- zdjęcie 1
 - zdjęcie 2
 - zdjęcie 3
 - zdjęcie 4

Converter USB-UART FTDI 3.3V miniUSB - SparkFun DEV-09873

Index: SPF-01965

Small converter enables the connection between serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The system is based on reliable system FT232RL. The distance between connectors is suitable for modules from Arduino Pro series.

€17.19
€13.97 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: SparkFun

Description

Converter enables the connection between two popular serial interfaces USB and UART is 3.3 V. The module is based on reliable system FT232RL (documentation) made by the company FTDI, which ensures stable operation and cooperation with the most popular operating systems.

 

The module can be used to exchange data between the computer and the system or microcontroller or for programming electronic sets with remote serial interface, e.g. Arduino or STM32Discovery. To connect the system to the computer you need a cord with a mini-usb.

 

SparkFun FTDI was developed with programming Arduino in mind. It has automatic restart, and the distance between connectors is suitable for modules Arduino Pro: goldpin female 6 x 1.

 

Inputs

The module has terminals in the form of female corner connectors goldpin with signals Rx, Tx, DTR, CTS and power supply lines: PWR (3.3 V) and GND. The board consists of the status LEDs (TX and RX), allowing you to monitor the status of communications. The converter connects to the computer using a cable via USB.

 

Converter - chip FT232RL
Converter - Socket miniUSB
Converter - Interface UART

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

MiniUSB B - A cable Esperanza EB-132 - 1.8m

USB cable (type A) - miniUSB cable (type B) used to connect your computer to devices equipped with mini USB-B sockets. It is 180 cm long.
Index: KAB-01090
Index: KAB-01090
Unavailable
Regular price €1.14 Price €1.14

Pro Micro - 3.3V/8MHz - Atmega32u4 module - SparkFun DEV-12587

Module based on the Arduino Leonardo, is characterized by small size. It has the AVR Atmega32U4 microcontroller. It is equipped with 20 digital inputs/outputs, as well as...
Index: SPF-01592
Index: SPF-01592
Waiting time: approx. 10-30 days
Regular price €17.88 Price €17.88

Arduino Pro Mini 328 module - 3.3 V/8 MHz - SparkFun DEV-11114

The module based on the Arduino Uno, is characterized by small size and low profile. It has an Atmega328 microcontroller with 32 KB Flash memory, 2 KB RAM, 14 digital I/o, 6 of...
Index: SPF-01596
Index: SPF-01596
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.40 Price €11.40

Arduino Pro 328 module - 3.3V/8 MHz - SparkFun DEV-10914

Module based on Arduino Uno with ATmega328 system, is characterized by small size and low profile. It has 32 KB of Flash memory, 2 KB of RAM 14 digital of I/os, 6 of which can...
Index: SPF-01679
Index: SPF-01679
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.65 Price €17.65

Customers who bought this product also bought:

Antimagnetic tweezer curved BK15

Stainless steel antimagnetic tweezers. Symbol: Baku BK15ESD.
Index: NSZ-00304
Index: NSZ-00304
Waiting time: about 10-30 days
Regular price €1.74 Price €1.74

Soldering tin in tube 16g / 1.00mm

Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.
Index: NSZ-00309
Index: NSZ-00309
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.14 Price €1.14

Rosin 20g

Flux with activators for easy soldering.
Index: NSZ-00587
Index: NSZ-00587
Available, 24h shipping!
(Check quantity)
Regular price €0.58 Price €0.58

Solder wick for tin 1 mm

Solder wick for removing tin excess. Width 1 mm, length 1.5 m.
Index: NSZ-00757
Index: NSZ-00757
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.81 Price €0.81

Female-male connecting cables 20cm black - 10pcs

Set of 10 connection cables with a length of 20 cm in black color.
Index: KAB-01020
Index: KAB-01020
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

Connecting cables female-female 20cm - 40pcs.

Set includes 40 PCs of multi-colored connection cables with a length of 20 cm ended from both sides with the female connector on goldpin.
Index: KAB-01021
Index: KAB-01021
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

Mini DC Motor MT62 3-6V

Small metal motor powered from 3 V - 6 V. Idle current 94 mA. Dimensions: 8 x 15 mm . Speed approx. 17000 rpm.
Index: MOT-01647
Index: MOT-01647
Available, 24h shipping!
(Check quantity)
Regular price €1.28 Price €1.28

A4988 - stepper motor driver RepRap 35V / 2A - Pololu 1182

Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

Stepper engine 42BYGH802U 200 steps/rev 12V/0.4A/0.35Nm

Unipolar stepper motor, six-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 12 V, draws 400 mA per coil. Holding torque is 3.56 kg*cm (0.35 Nm)....
Index: MOT-01474
Index: MOT-01474
Unavailable
Regular price €23.02 Price €23.02

Raspberry Pi Model A 256 MB + HD camera

Raspberry Pi mini-computer model A 256 MB RAM with dedicated camera with hardware support. The device has a 5 Mpx sensor and supports HD 1080p, 720p and 640 x 480p modes.
Index: RPI-01978
Index: RPI-01978
Unavailable
Regular price €46.28 Price €46.28

Battery storage case for 3 packs AA (R6) with cover and switch

Basket with cover and switch for three AA batteries (large fingers).
Index: AKC-00174
Index: AKC-00174
Available, 24h shipping!
(Check quantity)
Regular price €0.58 Price €0.58

Panasonic Eneloop battery R6 AA Ni-MH 2000mAh

Powerful Panasonic R6 AA batteries (large fingers). Nominal voltage: 1,2 V. Capacity: 2000 mAh. Up to 2100 charging cycles. Retains 70 % of capacity after 5 years. Price per 1...
Index: AKU-00773
Index: AKU-00773
Unavailable
Regular price €3.00 Price €3.00

Products from the same category

Converter RS232 - UART with connector DB9 - SP3232 3.3V / 5V - Waveshare 3965

Converter of serial interface RS232 to standard UART with 9-pin D-SUB connector. Control system is a popular SP3232. The module operates with a supply voltage range from 3.0 V...
Index: WSR-04475
Index: WSR-04475
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.56 Price €2.56

UART Converter - RS485 3.3V - ARK / RJ11 - Waveshare 4777

Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...
Index: WSR-04496
Index: WSR-04496
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.00 Price €3.00

FT232RL SP-880 - USB converter - RS232 COM +/-6V with DB9 connector - Adafruit 18

Adapter on 140 cm cable allows you to connect devices with RS232 connector to the computer through the USB connector. The module appears to the operating system as a virtual...
Index: ADA-04371
Index: ADA-04371
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.28 Price €19.28

USB-UART FTDI 3.3/5V converter for USB cable

The converter allows for communication between USB and UART interfaces. It allows you to exchange data between a PC and a board with a microcontroller. The module includes a...
Index: MOD-02040
Index: MOD-02040
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.05 Price €9.05

RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882

Shield for Raspberry Pi, version 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230  which allows communication between CAN and SPI and the SP3485 system that enables...
Index: WSR-12532
Index: WSR-12532
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.65 Price €9.65

USB adapter for female cables with USB-UART converter PL2303 - Waveshare 7965

The adapter allows you to connect a USB to many different modules, with built-in converter USB to UART PL2303. Completed with female wire connectors. The system is compatible...
Index: WSR-04470
Index: WSR-04470
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.21 Price €2.21

MAX485 transceiver RS485 - DIP - 5pcs.

The circuit used to convert RS-485 port voltage to TTL standard. Circuit in a DIP8 threaded housing.
Index: UCC-07693
Index: UCC-07693
Available, 24h shipping!
(Check quantity)
Regular price €3.42 Price €3.42

M5Atom Tail485 - RS485 - TTL adapter for M5Atom development modules

Tail485 is an RS485 converter dedicated to M5Atom development modules. It allows to convert RS485 signal to TTL . RS485 is a standard defining characteristics of...
Index: MSS-17981
Index: MSS-17981
Available, 24h shipping!
(Check quantity)
Regular price €6.49 Price €6.49

CP2104 USB-UART Converter - Pololu 1308

The converter enables communication between two popular USB and UART serial interfaces. It allows for data exchange between the computer and microcontrollers and uses CP2104...
Index: PLL-01896
Index: PLL-01896
Available, 24h shipping!
(Check quantity)
Regular price €10.91 Price €10.91

USB-UART FTDI 5V converter on 1.9m USB cable - SparkFun DEV-09718

The converter enables the connection between serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...
Index: SPF-11394
Index: SPF-11394
In stock, shipping 24 hours!
(Check quantity)
Regular price €17.19 Price €17.19

MSX FT232RL - USB-UART FTDI 3.3 / 5V converter

The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...
Index: MOD-01611
Index: MOD-01611
Czas oczekiwania: ok. 10-30 dni
Regular price €8.35 Price €8.35

Converter USB-UART FTDI FT232RL - miniUSB socket - Waveshare 6646

Converter provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...
Index: WSR-04498
Index: WSR-04498
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33