• EOL

UP Board 2GB RAM + 32GB eMMC Intel Quad-Core

Index: UPB-09480 EAN: 5904422313449

Minicomputer UP with an Intel Atom Cherry Trail Z8350 64-bit, of 1.92 GHz. The board has 2 GB of RAM DDR3L, 32 GB eMMC0, a graphics processing unit, a Gigabit Ethernet port, HDMI port, 4x USB 2.0, 1x UART, OTG USB 3.0 ports, 40 GPIO, and DSI and CSI connector. Works with the systems Android 5.0, Windows 10 and Linux.

UP Board 2GB RAM + 32GB eMMC Intel Quad-Core
€239.90
€195.04 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: UPboard

Attention!

The product has been discontinued. Check other products in category.

Description

Minicomputer UP with a powerful processorIntel Atom Cherry Trail Z8350 64-bit, of 1.92 GHzThe board has2 GB of RAM DDR3L, 32 GB eMMC0, a12-coregraphics processing unitIntel HD400 500 MHZ, aGigabit Ethernetport, HDMI port, 4x USB 2.0, 1x UART,OTG USB 3.0 ports, 40 GPIO, andDSI and CSIconnector. It has an Intel AES technology and Intel Idenity ProtectonWorks with the systemsAndroid 5.0, Windows 10andLinux ubilinux, Ubuntu, Yocto.

Minicomputer works with Windows 10 - license must be purchased separately.

How to run the UP minicomputer?

Minicomputer UP works with the systems Android, Windows 10, ublinux, Ubuntu, and Yocto. The device has 64 GB of memory eMMC.

Operating system

Minicomputer UP board works with the Android, Windows 10, ublinux, Ubuntu, and Yocto. The kit does not have a Windows license, it must be purchased separately.

The installation of the Windows operating system, is very simple, below is a brief instruction:

  • To install Windows, you will need an external USB hard drive of at least 4GB, for example, the Flash Drive.
  • On the disk, you should create a Windows image - the image can be downloaded from the official Microsoft website. It can be created with any program that can be found on the Internet or you can use the MediaCreationTool created by the Microsoft - on the websiteof Microsoft, available is installation instructions and download file.
  • Next, you need to connect the drive to a USB port on minicomputer. When connected to the current, there should show the image of the installation.
  • Before beginning the installation process, you must delete all partitions which are on the disk of minicomputer.
  • The manufacturer has prepared a package of drivers designed for minicomputer UP board.

Communication

Minicomputer UP has the main communication interfaces which can be found in office computers of PC class. The user has at his ore her disposal:

  • four USB 2.0 connectors, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
  • Ethernet slot, that is the ability to directly connect to the LAN network.
  • GPIO x 40 pin - outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers or engines. Among them are the pins supporting interfaces: I2C, SPI and UART.

Power supply

As a power source, the system uses the DC 5.5 / 2.1 mm connector. Manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and an output current of the used adapter shall be not less than 4.0 A. In our offer, you will find a special power adapter.

Specifications and comparison

Basic information
  UP Board 4 GB / 64 GB
Model UP Board 2 GB / 32 GB
Edition 2017.
Technical specification
Core

Quad-Core Intel Atom

Cherry Trail Z8350

Operating systems

Android, Windows 10, ublinux,

Ubuntu, Yocto.

Clock frequency 1,92 GHz
RAM 2 GB DDRL3
Memory 32GB eMMC
Connector GPIO

Connector 40-pin (2x20 pin)

raster 2.54 mm
Power supply

5.0 V / 4 A

through the socket DC 5,5 /2,1 mm

Board sizes 85.6 x 56.5 x 25 mm
Interfaces
USB interface 4x USB 2.0 - connector type a
Network interface Ethernet port 10/100/1000 Mbit / s
Wi-Fi Interface -
Bluetooth -
Camera the CSI connector
Touchscreen display connector for DSI
Video HDMI 1.4 b
Link

UART, SPI, I2C, GPIO, PWM,

PCM / I2S.

Others

USB 3.0 OTG, 2x USB 2.0, in a form of 10 pin outpts,

RTC battery,

Power button

 

 

UC - Microcontroller Z8350
UC - RAM 2 GB
UC - core 4. Quad Core
UC - Digital pins 40
UC - External memory eMMC 32GB
UC - freq 1.9 GHz
UC - Ethernet yes
UC - USB 4x USB
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V - DC 5.5/2.1mm
UC - SPI interface no
UC - LCD interface yes
UC - Camera interface yes
UC - Linux yes
UC - Android yes
UC - Windows yes
Package width 15.5 cm
Package height 5.1 cm
Package depth 9.2 cm
Package weight 0.158 kg

Pawel

03/22/23

Question: Is it possible to add RAM, SATA III hdd drive to the device
Answer: Unfortunately, there is no such possibility.

Customers who bought this product also bought:

Products from the same category: