Arduino Uno - SMD
Arduino Uno - SMD
Arduino Uno - SMD
Arduino Uno - SMD
Arduino Uno - SMD - zdjęcie 1
Arduino Uno - SMD - zdjęcie 2
Arduino Uno - SMD - zdjęcie 3
Arduino Uno - SMD - zdjęcie 4

ATWINC1500 - WiFi SPI / UART + U.FL connector - Adafruit 3060

Index: ADA-05970

Wi-fi module from Atmel operating in 802.11 bgn standard. The device works with voltage from 3.3 V to 5.5 V it communicates via interface SPI. It has support for SSL, WEP, WPA, WPA2 and AP mode which allows you to create ad-hoc network. The module also works with TLS 1.2 safety with firmware 19.4.4. On the board is a connector u.FL for connecting external antenna wi-fi.

€29.07
€23.63 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: Adafruit
Compatibility: Arduino

Description

Wi-fi module from Atmel operating in 802.11 bgn standard. The device works with voltage from 3.3 V to 5.5 V it communicates via interface SPI. It has support for SSL, WEP, WPA, WPA2 and AP mode which allows you to create ad-hoc network. The module also works with TLS 1.2 safety with firmware 19.4.4. On the board is a connector u.FL for connecting external antenna wi-fi.

Key features

  • Module from ATmel ATWINC1500 (documentation) is working in standard WiFi 802.11 bgn
  • It has support for AP mode (Access Point) which allows you to create ad-hoc network
  • It works with a voltage of 3.3 V and 5.0 V
  • It communicates
  • It supports SSL, WEP, WPA, WPA2, and TLS 1.2 security with firmware 19.4.4

 

 

The product is compatible with Arduino

On the Adafruit website, you can find the user manual along with a library for Arduino.

 

Connection

 

PinDescription
Vin DC supply voltage from 3.3 V to 5.5 V.
GND The ground of the system.
SCK Clock line of the SPI bus - is running with a voltage of 3.3 V and 5 V.
MISO The data line of the SPI bus - is running with a voltage of 3.3 V.
MOSI The data line of the SPI bus - is running with a voltage of 3.3 V and 5 V.
CS Chip Select - choice of an active device on the SPI bus by indicating the low status.
EN Indicating the high status from 3.3 V to 5 V, enabling the module. Indicating the low status, disabling the system. By default, pulled to GND with a resistor of 100 k (module is off)
IRQ The external interrupt.
Wake The signal to wake the module - it operates with a voltage of 3.3 V and 5 V. The unused pin in the Adafruit sample program.
RST Reset of the module, activated by the high status. By default, it is pulled to GND with a resistor of 100 k.
CFG The choice between the SPI interface (default) and UART interface.
RXD/TXD Communication pins of the UART interface.

Specification

  • Supply voltage: from 3.3 V to 5.5 V
  • The wi-fi module ATWINC1500
  • Support for AP mode
  • Support for securities WEP, WPA, WPA2 and SSL
  • Support for TLS 1.2 with firmware 19.4.4
  • Communication: SPI and UART interface
  • Connector u.FL to connect an external antenna wi-fi
  • Dimensions: 33 x 28 x 48 mm
  • Weight: approx. 5 g

 

UC - Microcontroller ATWINC1500

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

FeatherWing datalogger - RTC PCF8523 + microSD Shield for Feather - Adafruit 2922

The module is powered via battery and with the real-time clock RTC PCF8523 and a slot for microSD memory cards. FeatherWing extends the capabilities of the modules from Feather...
Index: ADA-05591
Index: ADA-05591
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.60 Price €11.60
  • Free shipping

Customers who bought this product also bought:

Arduino Yun Mini WiFi - module A000108

Connecting Arduino and Linux allows, via wi-fi network, to wirelessly program and control the device. The module is based on a ATmega32u4 and has 32 KB of Flash memory, 2.5...
Index: ARD-04244
Index: ARD-04244
Unavailable
Regular price €60.23 Price €60.23
  • Free shipping

Breadboard - 400 holes

Breadboard is used for creating and testing electronic circuits without the need for soldering. Version with 400 holes, the size of 82.5 x 53 mm.  Stripes (blue and red) help...
Index: PLY-00056
Index: PLY-00056
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60
  • Free shipping

Connecting cables male-male - 65pcs.

A set of 65 connecting wires to the breadboards of different lengths and in different colors.
Index: KAB-01022
Index: KAB-01022
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84
  • Free shipping

Wires with hooks - 5 pcs.

Set of 5 wires of different colors with a length of 25 cm ended with connector with hook.
Index: KAB-01554
Index: KAB-01554
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30
  • Free shipping

2.4GHz antenna with U.FL connector - self-adhesive - SparkFun WRL-11320

Antenna operating in the range of 2.4 GHz with U. FL connector. Working with modules of wi-fi, Bluetooth and XBee.
Index: SPF-01608
Index: SPF-01608
Czas oczekiwania: ok. 10-30 dni
Regular price €6.49 Price €6.49
  • Free shipping

Female-female 5 pin - 40cm - 5pcs

5-pin multicolor cable with the length of about 40 cm. Ended on both sides with a female connector - pitch of 2.54 mm.
Index: KAB-02703
Index: KAB-02703
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30
  • Free shipping

Solar cell 0,7W / 5,5V 95x95x3mm

A 0.7 W solar cell with an output voltage of 5.5 V. The dimensions of the plate are: 95 x 95 x 3 mm . The outputs are pads for solder cables.
Index: AKU-03695
Index: AKU-03695
Available, 24h shipping!
(Check quantity)
Regular price €3.70 Price €3.70
  • Free shipping

5dB WiFi antenna + SMA adapter - U.FL

WiFi antenna 5 dB with adapter SMA - U. FL for connecting it to the minicomputer Banana Pi M1+ M2.
Index: BNN-03742
Index: BNN-03742
Czas oczekiwania ok. 10-21 dni
Regular price €1.92 Price €1.92
  • Free shipping

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €36.98 Price €36.98
  • Free shipping

Relay S3-5 - 5V coil, 10A / 240VAC contacts

Coil voltage: 5 V, contacts: 10 A / 240 V AC. Dimensions: 18,8 x 15,2 mm, height: 15 mm.
Index: PAS-04922
Index: PAS-04922
Czas oczekiwania: ok. 10-30 dni
Regular price €0.44 Price €0.44
  • Free shipping

Arduino Proto Shield Rev3

Overlay on Arduino allowing you to create your own systems (shields). Model adapted to the latest versions of Arduino Rev3.
Index: ARD-01216
Index: ARD-01216
Unavailable
Regular price €4.16 Price €4.16
  • Free shipping

Step-down Voltage Inverter LM2596 - 3,2V-35V 3A

Module with pulse inverter step-down LM2596. Input voltage from 3.2 V to 40 V. Maximum continuous output current of 3 A. The output voltage is adjustable from 3.2 V to 35 V.
Index: MOD-02967
Index: MOD-02967
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98
  • Free shipping

Products from the same category

WiFi module ESP-12E ESP8266 Black - 11 GPIO, ADC, PCB antenna

Wi-fi module based on the ESP8266 chip. Works in standard wi-fi 802.11 b/g/n at 2.4 GHz. Equipped with 22 leads - pitch 2 mm, of which 11 is GPIO, 1 ADC and SPI. Has a built-in...
Index: MOD-05463
Index: MOD-05463
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.47 Price €3.47
  • Free shipping

Shelly1 - Relay Switch 12V/24V-60V DC / 240VAC WiFi 16A - Android / iOS

Complete module for controlling one 240 V AC, 12 V DC and 24 V to 60 V DC domestic device with power up to 3.5 kW via Wi-Fi network using a dedicated smartphone app from...
Index: ALT-13941
Index: ALT-13941
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.86 Price €14.86
  • Free shipping

ESP8266 wifi module + NodeMcu v3

Wi-fi module, based on ESP8266 system. On Board 10 GPIO ports (each of which can handle PWM, I2C and 1-wire), built-in 10-bit ADC and a converter USB-UART. It has installed...
Index: MOD-08241
Index: MOD-08241
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.79 Price €5.79
  • Free shipping

NodeMCU WiFi ESP8266 module - 4MB - Waveshare 16608

NodeMCU module based on ESP8266 ESP-12E WiFi chip. The board also includes CP2102 USB - UART converter. The device can be programmed using Lua, MicroPython, AT, Arduino...
Index: WSR-15136
Index: WSR-15136
Available, 24h shipping!
(Check quantity)
Regular price €7.42 Price €7.42
  • Free shipping

ESP32 WiFi + BT 4.2 - platform with module ESP-WROOM-32 compatible with ESP32-DevKit

Tile ESP32-DevKitC with a built-in module ESP-WROOM-32. The module has leads in the form of goldpins, pitch 2.54 mm. The system from the family ESP32 for communication in a...
Index: MOD-08893
Index: MOD-08893
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.95 Price €6.95
  • Free shipping

BleBox ShutterBox v2.0 - roller blind controller 230V WiFi - Android / iOS application

A ready module to control window shutters via wi-fi using apps on your smartphone from anywhere in the world. Is powered by a mains voltage of 230 V.To use BleBox, it is...
Index: BOX-06956
Index: BOX-06956
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.30 Price €39.30
  • Free shipping

WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna

Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART....
Index: DNG-10704
Index: DNG-10704
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.70 Price €3.70
  • Free shipping

DFRobot Beetle ESP32 IoT - microcontroller with WiFi Bluetooth

Beetle ESP32 is a smaller version of the FireBeetle board. Board based on the ESP-WROOM-32 module with dual-core  Tensilica LX6 processor with the frequency of 240 MHz. It has...
Index: DFR-13504
Index: DFR-13504
In stock, shipping 24 hours!
(Check quantity)
Regular price €15.70 Price €15.70
  • Free shipping

Sonoff Basic R2 - relay 230V - WiFi Android / iOS switch

Complete module that allows you to control 230V  domestic devices with a power up to 2200W through a WiFi network using a  smartphone app from anywhere in the world. The...
Index: MOD-07269
Index: MOD-07269
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.91 Price €7.91
  • Free shipping

BleBox SwitchBoxD - 230V WiFi relay 2x devices - Androis/iOS app

Ready module, that allows you to control two domestic devices 230 V with power up to 1 kW via wi-fi network using the app on your smartphone from anywhere in the world. In...
Index: BOX-07701
Index: BOX-07701
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.30 Price €39.30
  • Free shipping

ESP32 Starter Kit with ESP32 WiFi module

A kit consisting of modules and sensors to get you started and learn how the ESP32 module works. The set includes a module based on ESP-WROOM-32 chip which is equipped with...
Index: ZES-19291
Index: ZES-19291
Available
(Check quantity)
Regular price €30.00 Price €30.00
  • Free shipping

Particle Xenon - nRF52840 Mesh + Bluetooth

Miniature module with STM32 microcontroller with ARM Cortex M4F 64 MHz, 256 kB RAM, 1 MB Flash memory. It has a built-in module nRF52840 supporting the Mesh network and...
Index: PRE-13644
Index: PRE-13644
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.51 Price €19.51
  • Free shipping