• EOL

Induction soldering station Zhaoxin 950 - 150W

Index: LUT-11948

Tip-based soldering station Zhaoxin 950 with total capacity of up to 150 watts with adjustable temperature from 200 °C to 600 °C. The unit features a very lightweight iron and the actual value of the temperature of the soldering tip is shown on the display.

Induction soldering station Zhaoxin 950 - 150W
€226.50
€184.15 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Zhaoxin

Attention!

The product has been discontinued. Check others products incategory.

Description

Soldering station of new generation, in which the resistance or ceramic heater was replaced by the a new heating element powered by current of high frequency of 400 kHz that generates electromagnetic field. Principle of operation is the same as in the case of induction cookers, the resulting field causes heating of the receiver, which in this case is the tip.

The advantages of the new heating system

  • Heats the entire tip (not heated iron)
  • Rapid heating of the tip compared with the traditional soldering irons
  • Reduced size of the heating element, which reduces the weight of the iron
  • A large thermal power
  • Work comfort

Stacja lutownicza indukcyjna Zhaoxin 950 - 150W

 

Specification

  • Voltage: 220 V
  • The voltage of the heater: 36V / 400kHz
  • Power:150 W
  • Continuously adjustable temperaturefrom 200 °C to 600 °C
  • Temperature stabilization: ± 2 °C
  • Very light iton - 45 g
  • Locks the set temperature:access password
  • Digital display with blue backlight
  • The display showsthe actual value of the temperature of the soldering tipwith a temperature sensor adjacent to the tip
  • Made of technologyESD
  • SLEEP function - working with low temperature when idle
  • The possibility of cooperation with the unleaded legs
  • Warranty: 24 months
  • Dimensions: 130 x 150 x 105 mm
  • Weight: 4.6 kg

 

Included

  • Station Zhaoxin 950
  • Soldering iron with tip
  • Stand for soldering iron
  • Sponge for cleaning the soldering tip
  • 24 month warranty

First run

  • You should not run the device immediately after delivery.
  • Equipment must remain for about 12 hours at room temperature before switching on.
  • All complaints caused by running of the equipment too soon will be denied.
  • You must completely remove the screw/screws from the bottom of the station if the compressor is the source of air supply. These screws are marked in red (1 or 3 screws depending on model).

 

Note

Heating elements (heaters) and tips are not subject to warranty, you should purchase new ones.

 

Our range of accessories for soldering:

Voltage to 220 V AC
Voltage from 240 V AC
Voltage nominal 230 V AC
Nominal power 150 W
Temperature 200 - 600 °C
Solder - Fan no
Solder - real temperature reading yes
Solder - Hotair no
Solder - Type A/C digital
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: