- EOL
|
Attention! The sale of the product is finished. Check thenew version. |
Description
Sensor module that allows detection of the distance of an object in two axes X and Z and hand gestures. With this sensor you can control devices, e.g. by waving your hand. The system operates with voltages from 3.3 V to 5 V and communicates via I2C or UART.
The sensor allows to measure the distance within the range up to 25 cm for Z axis and the position from right to left within the range up to 15 cm (X axis). There are two IR transmitter diodes and one IR receiver on the board.
|
Arduino compatible product The manufacturer provides auser guideandlibraryfor Arduino users. |
Connection
The module has nine holes forgoldpin connectors -2.54 mmraster(not supplied, to be purchased separately). All connections are properly signed on the board.
| Pin | Description |
|---|---|
| GRN | Not used. Leave it unconnected. |
| TX0 | Transmitter in UART interface transmission. |
| RXI | Receiver in UART interface transmission. |
| VCC | Supply voltage from 3.3 V to 5 V. |
| GND | The weight of the system. |
| BLK | Not used. Leave it unconnected. |
| DR |
Pin data ready. Achieves a high state when the data is readable on the I2C bus. |
| CL | I2C bus clock line. |
| DA | I2C bus data line. |
Specification
- Supply voltage: 3.3 V to 5 V
- Measuring range: up to 25 cm
- Communication: I2C or UART bus
- Connections: holes forgoldpinbars- raster 2.54 mm(not supplied, sold separately)
- Two 3 mm diameter mounting holes
Useful links |
