

























A set of core prototype elements and tools needed to run minicomputer Raspberry Pi. The kit includes the case, power supply and memory card with the operating system, a large breadboard 830 fields with wires, the module leading out the GPIO pins of raspberry and relay, temperature sensor, LEDs and buttons. The kit does not include a Raspberry Pi, it can be purchased separately.
Attention! The product has been discontinued. Check others products in category. |
A set of core prototype elements and tools needed to run minicomputer Raspberry Pi. The kit includes the case, power supply and memory card with the operating system, a large breadboard 830 fields with wires, the module leading out the GPIO pins of raspberry and relay, temperature sensor, LEDs and buttons.
The set does not contain minicomputer Raspberry Pi, it can be purchased separately by clicking on the description of the product.
Thanks to the included elements, the user can run minicomputer Raspberry Pi, get acquainted with the digital ports by lighting the individual LEDs. Included in the set buttons allow you also to create a simple interface. Large breadboard along with the module ProtoPi, allow you to implement more complex projects in the future. The relay provides the control of the elements with a larger current consumption and a DS18B20 sensor indicates the current ambient temperature.
Set includes 13 elements:
L. p. | Photo | Name |
---|---|---|
1 | ![]() |
Original power adapter Raspberry Pi - 5.1 V with a load current of 2.5 A with a microUSB connector - is sent black or white. |
2 | ![]() |
Case for minicomputer Raspberry Pi - transparent case for Raspberry Pi version 3B+, 3B, 2B and 1B+ with external dimensions 28 x 60 x 88 mm. |
3 | ![]() |
MicroSD memory card with NOOBs operating system - capacity of 16 GB, class 10. Printing on the card may differ from the one visible in the picture, but the settings are completely saved. |
4 | ![]() |
Breadboard 830 fields - a large board with separate power lines to create electronic circuits. |
5 | ![]() |
Set temperature sensor DS18B20 + resistors 4.7 kΩ - Set consisting of a single temperature sensor DS18B20 with 1-wire interface and ten resistors of 4.7 kΩ in the wired case. |
6 | ![]() |
The RM2 relay module with optoelectronic isolation - system allows you to control actuators via ports Raspberry Pi. |
7 | ![]() |
Male-to-male wires - 65 PCs. of cables for connections on the Breadboard. |
8 | ![]() |
Female-to-female - 10 PCs. of cables for connections. |
9 | ![]() |
Module ProtoPi Plus with ribbon 40 pin - provides easy connection of all GPIO leads of the Raspberry 3 minicompute with any breadboard, no soldering needed. |
10 | ![]() |
Set of 10 leds 5 mm with resistors - set comprises of: 10 PCs of resistors, approx. 1.2 kΩ and 3 pcs of green, red and yellow LEDs and 1 blue led. |
11 | ![]() |
Tact Switch 12x12mm with cap - yellow mushroom - 5pcs - monostable button mounted in a wired way - THT with size of 12 x 12 mm in yellow colour. |
12 | ![]() |
Tact Switch 12x12mm with cap - blue mushroom- 5pcs - monostable button mounted in a wired way - THT with size of 12 x 12 mm in blue color |
13 | ![]() |
Set of 30 resistors 4.7 kΩ - serve to, e.g. lift the line from the data line of the temperature sensor. |
Test | 2 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
Temperature sensor DS18B20 - digital 1-wire THT
Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.Temperature and humidity sensor DHT11 - blue module
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...Addition to the Picoboard set for Raspberry Pi 4B/3B+/3B/2B/Zero
Set of elements for the empowerment of a set prototype for the Raspberry Pi. Includes: transistor, pressure sensor, motion sensor, two motors with control unit and IR receiver.Tamiya 70100 - Track and wheel kit
The kit includes various components: track, wheels, fasteners. Together with other Tamiya products allows you to create a complete chassis for the robot.Alcohol sensor MQ-3 module - semiconductor - Waveshare 9530
Module with the alcohol sensor MQ-3 with the goldpin pins, pitch of 2.54 mm. It is powered with the voltage from 2.5 V to 5 V. It has digital and analog output, making it...StarterKit Electro with Arduino Leonardo + Box
A set of electronic components that will help you get started with modules from the Arduino. The kit includes LEDs, resistors, sensors, chips, and LCD display, and basic board...Tact Switch 6x6mm/4,3mm SMD - 5pcs.
A small monostable button mounted in a surface way - SMD with the size: 6x6 mm, height: 4.3 mm. The price is for 5 pieces.Switch On-Off SMRS101 250V/6,5A
Switch, type on-off . Pins pitch is 7,0 mm, total height: 30 mm.Products from the same category
DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.Heated Bed Sticker for Dobot Mooz - 5pcs
Set of 5 pieces of stickers for heating table for Dobot Mooz printer in version 1 and 2. 152 x 130 mm sticker, made of PC material. Printed 3D element adheres better to the top...MakeBlock 87033 - tire 64x16mm - 4pcs
Tire size is 64 x 16 mm, made of silicone, has a smooth surface, without a protector, which allows more rapid movement of the vehicle.Case for Raspberry Pi 3B+/3B/2B RS Pro Plus - red with a flap
Red case for Raspberry Pi minicomputer in version 3B+, 3B, 2B and 1B+ with external dimensions of 94 x 63 x 32 mm. Removable top cover for easy access to the GPIO...Grove - 3-Axis accelerometer LIS3DHTR - I2C/SPI/ADC - Seeedstudio 114020121
3-axis accelerometer capable of measuring acceleration within ± 2 g, ± 4 g, ± 8 g, ± 16 g. It communicates via the I2C, SPI or ADC GPIO interface. It has the ability to...Electrolytic capacitor 470uF/16V SMD - 5pcs
Electrolytic capacitor SMD, capacitance: 470 uF, max. voltage: 16 V, max. operating temperature: 85 °C. Price of 5 pcs.Carbon monoxide and gas detector - Xblitz CO / GAS Alarm DG3-1
A carbon monoxide and flamable gas detector that supports voice messages and is controlled by modern microprocessor with a display informing about the degree of CO...MakeBlock 60516 - beam 0808-072 - blue - 4pcs
One of the most frequently used parts in MakeBlock platform, compatible with all components of the Motion and Structure. The beam is made of extruded aluminium 6061, surface...AI-Speaker IoT gateway - AIS Dom development version (DEV 2)
AIS home is the product that enables you to deliver the content of commands and accomplish them. You can use it in many different ways: via the mobile Android app, via a web...Laminating foil A4 80mic Argo - 100 pcs.
80 mic. film for lamination of A4 documents. It is also ideal for binding photos, postcards, business cards, certificates and other high value souvenirs.Yellow Board ESP8266 - WiFi module ESP-12E + battery holder
Board with the wifi ESP-12E module with connectors in the form of goldpin pins. Led out are 9 GPIO 1 analogue input and RX, TX, RESET, CH_PD pins, power supply and ground. Also...