- EOL
|
Attention! The sale of the product has been completed. Checkother sets from Arduino in this category. |
Description
A set of sensors and modules together with a programmable module Genuino 101. It enables the construction of several projects, including: LEDs, temperature sensor, motion sensor, lights, buttons and many other elements. The set provides knowledge and develops creativity. The kit includes aGenuino 101boardwith Intel Curie processor.
Contents of Gravity IoT kit.
Illustrated instructions
The manufacturer provides a comprehensiveuser guidein .pdf format, which helps to install the software, teaches you how to write a sketch (Arduino Sketch and includes 11 sensor-based projects that are included in the package). The guide is illustrated and is ideal for beginner users.
The projects included in the file look like this:
- Make an LED blink: blinking LED
- Sensor Light: Lights up when motion is detected
- Mini Lamp: Simple Lamp
- Sound Activated LED: Activating the LED by means of a flare
- Fading LED: simple PWM operation
- Light Controller: Change the brightness of the LED by means of a potentiometer
- Pandora's Box: A box that detects the brightness of the environment and opens and turns on the internal diode when it gets dark outside.
- Bluetooth Connection:Bluetooth support
- Weather Station:a wireless weather station reading temperature via Bluetooth
- Open Sesame!: Servomechanism support
- Electronic Gradient:Processing program support
Each of these projects takes you further into the world of Arduino. The projects are described in great detail. They all start by defining the necessary elements. The description itself includes connection diagrams and program code and a detailed description of which part of it is responsible for what.
|
The kit includesGenuino 101board, which can be programmed using freeArduino IDE environment. |
Genuino 101
Arduino compatible module equipped with 32-bitIntel Curie microcontrollerwith x86 Quark architecture and ARC 32-bit 32 MHz. It has 196 kB of flash memory, 24 kB SRAM, 14 digital inputs/outputs of which 4 can be used as PWM channels, 6 analog inputs and popular communication interfaces. The outputs work with a voltage of 3.3 V but tolerate 5 V. The board also has a Bluetooth LE module and an accelerometer and gyroscope.
The kit includes aGenuino 101boardwith an Intel Curie processor.
Genuino 101 specifications
- Supply voltage: 7 V to 12 V
- Microcontroller: Intel Curie x86 (Quark)
- Maximum clock frequency: 32 MHz
- SRAM: 26 kB
- Flash memory: 196 kB
- Ports I/O: 14
- PWM outputs: 4
- Number of analog inputs: 6 (A/C converter channels with 10 bits resolution)
- Serial interfaces: UART, SPI, I2C
- Connected LED on pin 13
- USB A socket for programming
- 5.5 x 2.1 mm DC connector for power supply
Set composition
The Gravity Starter Kit is included:
| L.p. | Photo | Description |
|---|---|---|
| 1 |  |
Genuino 101: Arduino compliant tile required for the above projects. |
| 2 |  |
DFRobot Gravity IO Expansion Shield for Arduino v7.1: a board that allows you to easily connect Gravity series sensors. |
| 3 |  |
- Bluetooth 4.0 Low Energy. |
| 4 |  |
USBcablefor motherboard programming. |
| 5 |  |
Small modeling servo- Micro 9g type. |
| 6 |  |
Buzzer module- simple sound generator. |
| 7 |  |
Analogue light intensity sensor- Operating in the range from 1 Lux to 6000 Lux. |
| 8 |  |
Analogue sound sensor- allows detection of the volume level or clapping sounds. |
| 9 |  |
Rotary encoder module- A knob to create a simple user interface. |
| 10 |  |
Push button module. |
| 11 |  |
Adjustable digital distance sensor- The measuring range from 3 to 80 cm, determined by the knob. Powered by 5 V. |
| 12 |  |
Digital motion detector- PIR type sensor with digital output. |
| 13 |  |
Analogue temperature sensor LM35. |
| 14 |  |
Module with red LED. |
| 15 | |
Module with green LED. |
| 16 | |
Yellow LED module. |
| 17 |  |
Basket for 6 AA batteriesto power Genoa. |
Each module includes a set of cables that allow you to connect to Genoa via the included Expansion Shield.
For a description of how to connect the modules, please refer to the manufacturer's linked pages above.
Useful links |
