3E Model 850 mAh 11.1V 15C

Package Li-Pol 3E Model 850 mAh 15C 3S 11.1V

Index: AKU-00829

Capacity: 850 mAh.Nominalvoltage: 11.1 V. Max.discharge current:Dimensions: 56 x 30 x 23 mm. Weight: 71g.

€4.63
€3.76 tax excl.

Unavailable
Discontinued product
30-day returns

Attention!

The 3E Model series has been replaced by Redox batteries .

Specification

  • Capacity: 850 mAh
  • Nominal voltage: 11,1 V
  • Max discharge current: 15 C (12.75 A)
  • Dimensions: 56 x30 x 23 mm
  • The weight:71 g

Our offer also includes chargers and JST sockets matched to the package connectors.

Attention!

  • Do not discharge below 3V/cell.
  • Li-POL batteries require chargers that support Li-pol cells/packages charging process.
  • Do not charge (applies to all Li-Pol types) with ordinary chargers that do not have dedicated charging algorithm for this type of batteries.
  • Use only with regulators that enable work with Li-Ion/Li-Pol batteries.
  • Do not store with other conductive materials (short circuit possibility)!
  • Do not dismantle packages and cells, do not pull out of the protective foil.
  • Do not leave unattended during charging.
  • In case of mechanical damage to the cell - DO NOT USE!


Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Li-Pol charger with balancer REDOX Beta Combo + power supply

Loader/unloader with built-in cell balance. Supports LiPo, LiIon and LiFe, NiCd, NiMH and Pb cells and packages. It also comes with a power supply, allowing direct...
Index: AKC-00557
Index: AKC-00557
Unavailable
Regular price €30.00 Price €30.00

Charger Li-Pol / Li-Fe / Li-Ion / Ni-CD / Ni-MH with balancer - Redox Alpha V2

Charger/discharger for packages: LiPo, LiFe, LiIon, NiCDi  NiMH with built-in balancer of links Redox Alpha.
Index: AKC-00646
Index: AKC-00646
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.26 Price €26.26

Bag for LiPo packages 200 x 180 mm (small)

Bag for safe storage of lithium-polymer packages with dimensions: 200 x 180 mm.
Index: AKC-00825
Index: AKC-00825
Unavailable
Regular price €8.14 Price €8.14

Charger Li-Pol R-Planes

Battery charger for LiPo packages 7.4 - 11.1V powered by 12V DC.
Index: AKC-00832
Index: AKC-00832
Unavailable
Regular price €15.12 Price €15.12

Customers who bought this product also bought:

Ball Caster trio mini - plastic - 3pcs.

Three plastic balls in the canopy. Ideal for supporting the front of a two-wheeled robot.
Index: PLL-00477
Index: PLL-00477
Unavailable
Regular price €2.07 Price €2.07

Wheel 60x8mm - black - 2pcs. - Pololu 1420

Set of plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. Suitable for engines with Pololu gears.
Index: PLL-00022
Index: PLL-00022
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.30 Price €4.30

LCD display 2x16 characters blue

Symbol: JHD162A B-W. Driver compatible with HD44780 . Blue negative. Backlight: white LEDs. Character color: white.
Index: LCD-00224
Index: LCD-00224
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53

Stand for the Sharp digital sensor - Pololu 1133

PCB stand facilitating the connection of digital distance Sharp sensor with the main module of the project.
Index: PLL-00034
Index: PLL-00034
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.85 Price €1.85

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

Stand for DIP8 - 5pcs

Stand for chip DIP 8-pin. Price for 5 pieces.
Index: UCC-00092
Index: UCC-00092
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.23 Price €0.23

Universal plate PDU27 - THT

Plate for the installation of THT threaded elements. It has 1080 holes, its external dimensions are: 63 x 164 mm.
Index: PLY-00168
Index: PLY-00168
Unavailable
Regular price €2.77 Price €2.77

L293D - two-channel 36V / 0.6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07

Stand for DIP16 - 5pcs.

Stand for chip DIP 16 pin. Price for 5 pieces.
Index: UCC-00185
Index: UCC-00185
Czas oczekiwania: ok. 10-30 dni
Regular price €0.35 Price €0.35

Sharp GP2Y0D340K - digital distance sensor 40cm

Sharp GP2Y0D340K digital distance sensor detects objects within a range of 40 cm.
Index: SES-00247
Index: SES-00247
Unavailable
Regular price €11.40 Price €11.40

Clip for 9V battery with cable - 15cm

A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-00416
Index: AKC-00416
Available, 24h shipping!
(Check quantity)
Regular price €0.35 Price €0.35

Servo TowerPro SG-5010 - standard

Servo of standard type, double bearing. Speed: 0.16 s /60 ° . Torque: 6.5 kg. Dimensions: 40 x 20 x 41 mm. Weight: 48 g.
Index: MOT-00485
Index: MOT-00485
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.86 Price €4.86

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58