









System to connect the XBee module. It has the voltage regulator of 3.3 V and logic level converter of 5V to 3.3 V. It works with all XBee modules from 1 & 2.5, standard and pro series.
System to connect the XBee module. It works with all XBee modules from 1 & 2.5, standard and pro series. It allows you for communication and programming via the serial interface entered on the goldpin connectors.
The system has a built-in voltage regulator of 3.3 V which allows to power the system with voltage of 16 V. On the board is also the converter of logic levels of 5 Volts to 3.3 V. The status of communication is signaled by LEDs.
Useful links |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Module XBee 802.15.4 1mW Series 1 - PCB Antenna
The XBee Series 1 module with a transmitter with the power of 1 MW and antenna built-in in the tracks of PCB, operating in the area of wireless network of up to 100...Module XBee 802.15.4 1mW Series 1 - U.FL Connection - SparkFun WRL-08666
The module from the XBee Series 1 with a transmitter with the power of 1 mW with the u. FL connector for connecting the external antenna. It w orks in the area of wireless...Module XBee ZB Mesh 2mW Series 2 - Wire Antenna
XBee Series 2 module with a 2 mW transmitter with an antenna as a cable. It operates within a wireless network range up to 120 m. XBee Series 2 requires...XBee ZB Mesh 2mW Series 2 Module - U.FL Connection
XBee Series 2 module with 2 mW transmitter and U.FL connector for connecting an external antenna. It operates within a wireless network range up to 120 m. XBee...Customers who bought this product also bought:
XBee ZB Mesh 2mW Series 2 Module - U.FL Connection
XBee Series 2 module with 2 mW transmitter and U.FL connector for connecting an external antenna. It operates within a wireless network range up to 120 m. XBee...A4988 - stepper motor driver RepRap 35V / 2A - Pololu 1182
Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....DC Motor with 180:1 Gear 80RPM - angular - Pololu 1593
Small plastic motor with 180:1 gearbox, 80 rpm, 2.16 kg*cm (0.21 Nm) torque. The motor can be an alternative to Polol micro motors.Servo Hitec HS-322HD - standard
Effective servo made by company Hitec, has karbonite gears with increased strength. Speed: 0.15 s/60°. Torque: 3.7 kg*cm. Dimensions: 41 x 20 x 37 mm. Weight: 43 gr.Universal plate PDU20 - THT, DIL-20
The board for mounting THT threaded elements and integrated circuits in the DIL-20 enclosure. It has 240 holes, its external dimensions are: 84 x 94 mm.Logic level converter - SparkFun
The module allows for communication between systems using the two most popular voltage levels: 3.3V and 5V. It allows for connecting serial interfaces: UART, SPI and I2C.Heat shrink tube 1.6/0.8 red - 10pcs
The diameter before heat shrink: 1.6 mm diameter after heat shrink: 0.8 mm. Price for 10 x 1 meter.Temperature sensor DS18B20 - digital 1-wire THT
Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.Stand for MQ - gas sensor - Pololu 1479
Stand that allows mounting of sensors from MQ series.Smoke and flammable MQ-2 gas sensor - semiconductor
Smoke and flammable gases detector with analogue output.Products from the same category
FireAngel ZigBee module - for alarm sensors
The communication module ZigBee alarm sensors FireAngel. The device adds the possibility of integration with smart home systems for sensors ST-630, NM-CO-10X and HT-630. It has...XBee Explorer Serial RS232 - SparkFun WRL-13225
XBee Explorer is an easy to use board with the RS232 serial bus for the XBee module. The board works with all the XBee modules from series 1 and series 2.5, and Standard and...XBee Shield for Arduino - SparkFun WRL-12847
Shield makes it easy to create a wireless connection by using Arduino and XBee. It is w orking with modules Series 1, Series 2, standard and Pro. It has pins fixed to...XBoard v2 of the Internet-bridge - compatible with Arduino
Xboard is a board compatible with Arduino, has an Ethernet port, slot for XBee modules and Atmega328 microcontroller known from version Uno. The device can be programmed via...DFRobot Bees Xbee - Shield for Arduino
Shield for Arduino, which enables to add a wireless connection to the microcontroller via connection of the XBee modules. The board has also plenty of space for extra items.Grove - XBee Carrier - carrier board for XBee modules
The stand is mainly designed for Bee series modules based on ATMega 328 chip. It is also compatible with RFBee, WiFi Bee, Xbee and Bluetooth Bee modules. There are two Grove...2.4GHz antenna with U.FL connector - self-adhesive - SparkFun WRL-11320
Antenna operating in the range of 2.4 GHz with U. FL connector. Working with modules of wi-fi, Bluetooth and XBee.XBee Explorer USB v2 module - SparkFun WRL-11812
USB converter for XBee module. It works with all XBee systems from 1 & 2.5, standard and pro series. This version has the RESET button for the XBee system.Arduino Fio module - SparkFun DEV-10116
The Arduino module is based on Arduino Atmega328P, compatible with software Funnel. It has 32 kB of Flash memory, 2 kB of RAM, 14 digital of I/os, 6 of which can be used as...DFRobot Leonardo XBee socket - compatible with Arduino
The DFRobot module is fully compatible with Arduino Leonardo. It has 20 digital inputs/outputs, 7 PWM channels, 12 analog inputs and popular communication interfaces....Female SMA - U.FL adapter - 10cm - SparkFun WRL-09145
Adapter for 2.4 GHz U.FL - SMA (female) antenna connectors , 10 cm long.