Spis treści:
- 1 3D Scanner - Revopoint MINI 2 - Advanced Edition
- 2 3D scanner - Revopoint Miraco
- 3 3D scanner - CR-Scan Ferret Pro
- 4 M5NanoC6 Dev Kit - ESP32-C6FH4 developer kit
- 5 Pineboards Hat uPclty Lite
- 6 Argon BLSTR DAC sound card with ground loop isolator for Argon One V3
- 7 Sonoff NSPanel Pro
- 8 Transformer expansion module for MEW-01
- 9 Aeotec Z-Stick Gen5+ - USB module - Z-Wave
- 10 Tuya - ZigBee mini-overhead relay
- 11 Tuya - mini WiFi lighting controller
June brings not only hot days, but also exciting new products in the Botland store! This month we would especially like to draw your attention to interesting products, among which dominate a variety of scanners, 3D printer accessories, smart home products and much more.
3D Scanner - Revopoint MINI 2 - Advanced Edition
We begin the entry with 3D scanners – introducing the Revopoint MINI 2 and Revopoint Miraco. Now a few sentences about each of them.
Revopoint MINI 2 is a specialized device that enables scanning of objects, even in color. The product can be used in both handheld and stationary modes, allowing adaptation to the requirements of a specific project. With a precision of 0.02 mm, the scanner effectively captures complex forms and structures, which is crucial in areas such as engineering, medicine and 3D modeling.
The device provides high-speed scanning at up to 16 frames per second, and its lightweight and compact design (dimensions 132 x 53 x 36 mm, weight 175 g) makes it easy to transport and use in a variety of conditions.
It is worth mentioning that the MINI 2 uses blue LED light scanning technology, which gives better quality and precision scans compared to red light. The Advanced Edition kit includes a 3D scanner, a two-axis rotating platform and other necessary accessories. MINI 2 is a versatile tool used for digitizing small, complex objects in a variety of industries. It is ideal for both professionals and hobbyists.
3D scanner - Revopoint Miraco
Revopoint Miraco is another 3D scanner from Revopoint
combining seamless operation and intuitiveness with innovative solutions. It gives the ability to scan small as well as large objects. With a 48 Mpx RGB camera, the scanner accurately captures the colors and textures of scanned objects. The device has two modes of operation: single-shot mode (Single-shot Mode), ideal for accurate scanning of complex surfaces, and continuous mode (Continuous Mode), which allows rapid creation of 3D models at up to 15 frames per second.
It does not require connection to a computer to operate (editing capabilities on the built-in screens), while it may be needed for post-processing our material.
The device weighs only 750 g, its dimensions are 200 x 50 x 110 mm. In addition to the scanner itself, the kit comes with a host of useful items, such as joints, a small turntable and the necessary cables.
3D scanner - CR-Scan Ferret Pro
CR-Scan Ferret Pro, an advanced 3D scanner from Creality, was created for users who need an effective tool for spatial digitizing. Its compact size and lightweight design make it easy to carry and use in various places. Thanks to modern technology, the scanner enables detailed mapping of objects, which is invaluable in fields such as reverse engineering, product design or digitization of historical monuments.
Integrated software with an automatic 3D modeling function greatly simplifies the data processing process, making it accessible even to less experienced users. CR-Scan Ferret Pro is an indispensable tool for professionals and hobbyists who value precision and convenience.
M5NanoC6 Dev Kit - ESP32-C6FH4 developer kit
Another novelty, this time something for those working on projects with the IoT theme from the company M5Stack – M5NanoC6. Measuring 23.5 x 12 x 9.5 mm and weighing just 2.5 g, this small device supports modern wireless communication methods (WiFi 6, Zigbee, Thread, Matter) making it a perfect solution for applications requiring high performance and reliability in data transfer.
In addition, the module features programmable RGB LEDs, a built-in IR emitter for convenient management of IoT devices, and a ceramic antenna to guarantee a stable connection even in harsh environments. The built-in Grove connector allows for easy expansion by connecting to M5Stack products using UART, I2C and other protocols.
M5NanoC6 provides the perfect solution for smart homes, industrial automation and many other areas of IoT, offering a versatile development platform for cutting-edge projects.
Pineboards Hat uPclty Lite
Pineboards Hat uPCIty Lite is an innovative PCI Express overlay created specifically for the Raspberry Pi 5. Equipped with a PCIe x4 slot, it supports external power and has robust security features, allowing even advanced graphics cards such as the RTX 4090 to be connected. The board provides 12 V at 8 A via a standard ATX power connector, and a barrel jack is available for less demanding applications.
Compatible with PCIe x1 interfaces in Gen2 and Gen3 standards, the overlay offers versatile connectivity. With compact dimensions (65 x 56.5 mm) and a full set of accessories, Hat uPCIty Lite is ideal for electronics developers and enthusiasts looking for a simple and convenient way to integrate new peripherals into their projects.
In addition to the board, the kit also comes with FPC PCIe tape, spacers and M2.5 screws.
Argon BLSTR DAC sound card with ground loop isolator for Argon One V3
Argon BLSTR DAC is a specialized sound card dedicated to the chassis of the Argon One V3, which significantly improves the sound quality with Raspberry Pi 5. Equipped with a Texas Instruments PCM5122 DAC, it offers audio at full 24-bit resolution and a sampling rate of 192 kHz.
The module also includes a ground loop isolator to eliminate interference and noise, ensuring audio clarity. Installation is simple, and the convenient audio connection via a 3.5mm port makes using the card intuitive. It comes with 3.5mm jack to 3.5mm jack and 3.5mm jack to RCA cables for easy connection to various audio devices, making the Argon BLSTR DAC the ideal solution for music lovers and professionals.
Sonoff NSPanel Pro
Fans of smart home – we have something especially for you!
Sonoff NSPanel Pro with a 3.9-inch color touchscreen will allow you to easily and effortlessly manage lighting, sensors, cameras and other such devices.
What’s more, the presented product allows you to control energy consumption, set temperature and even audio communication. The option to create schedules and scenes allows you to automate daily activities in your smart home. You can schedule appliances to turn on and off at specific times, which increases convenience and improves energy efficiency.
Compatible with commonly used home automation systems, such as Google Home and Amazon Alexa, it enables voice control, which greatly enhances convenience. It supports ZigBee, WiFi and Bluetooth protocols .
Transformer expansion module for MEW-01
Module Zamel MRP-200A is a modern device that expands the possibilities of monitoring energy consumption in MEW-01 MRP, MEW-01 and MEW-01 Lite systems.
Thanks to MRP-200A you can track the load of up to 200 A on the electrical grid, allowing you to precisely monitor energy consumption. The kit includesthree SC-24 current transformers that guarantee accurate measurements.
The module is designed for DIN-rail mounting, and its configuration is easy with the configuration page available at http://192.168.4.1. Compatibility with MEW-01 MRP, MEW-01 and MEW-01 Lite is ensured from software version 2.8.56, and older versions require updates.
Aeotec Z-Stick Gen5+ - USB module - Z-Wave
Don’t let the inconspicuous pendrive-style appearance fool you – the Aeotec Z-Stick Gen5+ is an innovative USB adapter that allows you to create your own locally hosted gateway. It has SmartStart and S2 Security functions to control Z-Wave devices, plus it is compatible with various platforms, including Raspberry Pi, Windows, Linux.
The adapter uses Z-Wave Plus technology, offering increased range and faster communication. Equipped with a 100 mAh battery, it allows adding or removing devices from the Z-Wave network even when the computer is off, thanks to a special button.
Z-Stick Gen5+ provides a high level of data security and is compatible with more than 3,000 certified Z-Wave products, ideally supporting the automation of lighting, heating and home security monitoring systems.
Tuya - ZigBee mini-overhead relay
Explore the potential smart home with the miniature ZigBee relay from Tuya! Allowing you to control a single circuit, this small module will fit almost anywhere and allows you to remotely manage electrical devices or lighting through the ZigBee network.
Plan the operation of the devices according to your needs, enjoying the functionality and convenience of use, as well as simple installation without modifying the wiring. The relay supports a variety of electrical systems in the voltage range of90 V to 250 V AC, offering extensive integration options and an ideal solution for modern homes.
Tuya - mini WiFi lighting controller
Light up your home with the help of WiFi smart lighting controller from Tuya! This advanced module allows you to easily control light intensity through the Tuya Smart mobile app.
Whether you want to create a cozy mood in the living room or soft lighting by the bedside, this controller allows you to fine-tune the brightness.
In addition, with the timer function, you can schedule the lights to turn on and off according to your schedule, which helps save energy. Compatibility with electrical systems from 90 volts to 250 volts AC and connection via WiFi provide a wide range of applications in your home.
