Arduino MKR WAN 1300 LoRaWAN ABX00017 module - SAMD21 - with headers
FeatherWing OLED display 128x32px - pad for Feather - Adafruit 2900
iNode Control Point UART - programmable UART module - RFID system
Motherboard for 3D printer Creality CP-01 - Creality V2.5.2
When starting your adventure with the world of electronics, it is worth to take a look at the Grove system - especially if you want to design systems based on Arduino and Raspberry Pi without spending a fortune. Grove cable system offers good quality at an affordable price and full compatibility with microcomputers. The Grove interconnect cable system offers everything you need - and you'll find it all at our Botland online store! Do your shopping without leaving your home.
Grove - female-female 4-pin - 2mm / 20cm cable
Cable with two Grove standard connectors. It has 4 pins with a 2 mm grid, the diameter of the wire is 26 AWG. They are used to connect Grove sensors to the base cover. The...
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables with a latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Wire length is 20 cm. Version with a latch.
Grove - universal 4-pin connector
Universal 4-pin connector for soldering in the PCB. The distance between the pins is 2 mm. Compatible with, among others, the wires from the Grove series. The package contains...
Grove - set of 5 female-female 4-pin - 2mm/30cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. Cable length is 30 cm. Version with a latch.
Grove - universal 4-pin angle connector 90° - 10pcs.
Universal 4-pin Grove connector designed to be soldered into PCBs. Raster is 2 mm, the pins are bent at 90°. The connectors are compatible with Grove cables. Set includes 10...
Grove - set of 5 4-pin 2mm - female/male 2.54mm 20cm cables
Conversion cable between HY2.0-4P male connector and 2.54 male / female dupont cables.
Grove - a set of 5 female-female 4-pin - 2mm/5cm cables with a latch
A set of five 4-pin wires Grove. They are used to connect Grove sensors with Base Shield Board v2. Wire length is 5 cm. Version with lock.
Grove - a set of 5 female-female 4-pin - 2mm/20cm cables without latch
A set of five 4-pin cables Grove, raster 2 mm. They are used to connect Grove sensors with Base Shield Board. Cable length is 20cm. Version without a latch.
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Grove - Cable Pigtail - 4-pin connection cable - 10cm - Adafruit 5244
Connection cable from Adafruit. On one side it has four isolated wires (each in a different color), and on the other side it has a connector compatible with the Grove...
Grove - set of 5 female-female 4-pin - 2mm/50cm with latch
A set of five 4-pin Grove wires. They are used to connect sensors with Grove Base Shield v2. The length of the cable is 50 cm. Version with a latch.
Grove - a set of 5 wires 4-pin 2mm - female wires 2.54mm/30cm
A set of five 4-pin Grove female wires. They are used to connect Grove sensors with a board incompatible with the Grove raster 2.54 mm wires, such as Raspberry Pi. Length is...
Grove - servo splitter - 20cm - 5pcs
A set of five Grove cables to connect e.g. Base Shield v2 to servers, actuators, sensors or devices with a Grove connector. Each one is 20 cm long and consists of a 4-pin Grove...
Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm
A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.
Grove - Qwiic and STEMMA QT Hub - Seeedstudio 103020292
A module for connecting devices with a Qwiic or STEMMA QT connector to a Grove connector or Grove devices to a Qwiic / STEMMA QT connector. The modules can be cascaded to...This system has long been appreciated by users around the world, that's why we have a wide range of Grove cable system components in our store - including starter kits created to help you learn electronics quickly and easily, with everything you need to start your adventure with building projects. Base overlays are a category to expand the capabilities of base boards that interact with both Arduino and Raspberry Pi. Grove connection cables are everything you need to connect your accessories to the communication bus.
The first and probably most important argument for choosing Grove is its compatibility with Arduino, Raspberry Pi or BBC micro:bit microcomputers. All Grove modules are equipped with standard connectors, which eliminates the need for soldering or plugging in contact boards - the connection is secure and durable. Grove connection cables are added to sensors and modules at the time of purchase. In our store you can buy various types of cables and adapters.
The Grove cable system offers a wide range of accessories, such as weather, light, air quality and even medical sensors. We have sound and communication modules, LEDs and displays, Grove cables, accelerometers, gyroscopes, relays, motor and servo controllers and motors and servos. As you can see, this system is really extensive and offers us a full range of products to immerse ourselves in the world of electronics.
