Filter by
Categories
more (1) ok clear
Price
1 4671
more (-5) ok clear
Manufacturers
Filter

Promotion products

Recomendations

New products

Products: 142
Loading...

LED strip 5 x USB 5V LEDs with light sensor - Kitronik 3562

The LED strip has been designed for use in non-standard housings and low-power lighting. Thanks to the use of a light sensor in the strip, the device works great in the form...
Index: KTR-21850
Index: KTR-21850
Shipping in 24 hours
Available
Check quantity
Regular price €3.58 Price €3.58
  • New

Smoke detector with built-in battery - Zamel CDB-02

The Zamel smoke detector is equipped with a built-in battery. The device constantly monitors the level of smoke concentration in the room. When the condition rises, the...
Index: ZML-21930
Index: ZML-21930
Shipping in 24 hours
Available
Check quantity
Regular price €10.83 Price €10.83
  • New

WiFi gas sensor - Zamel CGZ-02

The CGZ-02 gas sensor from Zamel is an explosive gas sensor equipped with a WiFi module , such as: natural gas, propane-butane. The device continuously monitors the...
Index: ZML-21928
Index: ZML-21928
Shipping in 24 hours
Available
Check quantity
Regular price €27.99 Price €27.99
  • New

Kodowanie na dywanie w przedszkolu - Anna Świć

Coding on the carpet in kindergarten is a book by Anna Świa, intended for preschool children. The book provides a comprehensive introduction to the world of programming for...
Index: OZB-21977
Index: OZB-21977
Shipping in 24 hours
Available
Check quantity
Regular price €8.46 Price €8.46
  • New

Filament Devil Design PLA 1,75mm 1kg - Silver

Silver PLA filament from Devil Design - thermoplastic polyester in the form of fibers , used in printing pens and 3D printers. The weight of the material on the spool is 1...
Index: DEV-21646
Index: DEV-21646
Shipping in 24 hours
Available
Check quantity
Regular price €21.48 Price €21.48
  • New

USB 3.0 HUB - 4 ports - silver - Tracer H41

The Tracer USB HUB adds four additional slots to the number of USB ports on your device. USB HUB Tracer is a great solution for people who want to increase the maximum...
Index: MEB-21797
Index: MEB-21797
Shipping in 24 hours
Available
Check quantity
Regular price €8.66 Price €8.66
  • New

Numato Lab - 4-channel 2A + 4GPIO relay module - USB

The Numato Lab module is equipped with four relays DPDT HFD27 / 005-S with a coil powered with a voltage of 5 V. The board can be controlled from a computer using a USB...
Index: NUM-21949
Index: NUM-21949
Shipping in 24 hours
Available
Check quantity
Regular price €69.22 Price €69.22
  • New

Pico 2G Expansion - GSM / GPRS / GNSS expansion board with display - for Raspberry Pi Pico - SB Components 21895

The expansion board manufactured by SB Components is equipped with the SIM868 chip, which enables communication in the 2G standard (GSM 850 / EGSM 900 / DCS 1800 / PCS 1900...
Index: SBC-21673
Index: SBC-21673
Shipping in 24 hours
Available
Check quantity
Regular price €60.54 Price €60.54
  • New

LoRa Expansion 868MHz for Raspberry Pi Pico - SB Components SKU21628

The board created by SB Components allows the Raspberry Pi Pico module to communicate in the LoRa long-range wireless network, at a frequency of 868 MHz . The board has a...
Index: SBC-21674
Index: SBC-21674
Shipping in 24 hours
Available
Check quantity
Regular price €59.68 Price €59.68
  • New

Sense HAT - HAT with environment sensors for Raspberry Pi Pico - SB Components SKU22366

The Sense HAT for Raspberry Pi is equipped with four environmental sensors and an LCD display . The overlay created by SB Components allows you to measure such values as:...
Index: SBC-21671
Index: SBC-21671
Shipping in 24 hours
Available
Check quantity
Regular price €47.52 Price €47.52
  • New

Extension with breadboard for BBC micro:bit - SB Components SKU22717

The expansion board for BBC micro: bit, developed by SB Components, is equipped with buttons , GPIO micro: bit pins and a contact plate . The BBC micro: bi t module is...
Index: SBC-21669
Index: SBC-21669
Shipping in 24 hours
Available
Check quantity
Regular price €18.45 Price €18.45
  • New

RoundyFi - round LCD 1,28'' 240x240px - ESP-12E - SB Components SKU24025

RoundyFi is a small, color display with a diagonal of 1.28 " and a resolution of 240 x 240 pixels. The module is based on the GC9A01 controller and the ESP8266 ESP-12E...
Index: SBC-21668
Index: SBC-21668
Shipping in 24 hours
Available
Check quantity
Regular price €56.20 Price €56.20
  • New

Debix model A development board - Ethernet + PoE

Polyhex EMB-AS-E01 is an extension to Polyhex Debix model A , equipped with an Ethernet RJ45 network interface with a speed of 1000 Mb / s with the possibility of extending...
Index: OKD-21951
Index: OKD-21951
Shipping in 24 hours
Available
Check quantity
Regular price €38.84 Price €38.84
  • New

Polyhex Debix model A - 2GB RAM + Quad Core 1.6GHz

The module is based on an efficient, quad-core i.MX 8M Plus processor, which is characterized by high temperature resistance. Debix model A is a new development from OKdo...
Index: OKD-21952
Index: OKD-21952
Shipping in 24 hours
Available
Check quantity
Regular price €162.53 Price €162.53
  • New

RoundyPi - round LCD 1,28'' 240x240px - RP2040 - SB Components SKU24018

The small, color RoundyPi display has a diagonal of 1.28 " and a resolution of 240 x 240 px. It is based on the GC9A01 controller and RP2040 dual-core microcontroller...
Index: SBC-21667
Index: SBC-21667
Shipping in 24 hours
Available
Check quantity
Regular price €44.70 Price €44.70
  • New

Barcode scanner - HAT For Raspberry Pi Pico - SB Components SKU22441

Shield for Raspberry Pi Pico with a barcode reader, created by SB Components. The manufacturer of the overlay has placed a DE2120 barcode scanner on the board, which can read...
Index: SBC-21670
Index: SBC-21670
Shipping in 24 hours
Available
Check quantity
Regular price €67.05 Price €67.05
  • New

RangePi - LoRa 868MHz with RP2040 - USB Stick - SB Components SKU23011

RangePi is a module in the form of a USB adapter / dongle that allows long-range LoRa communication with low energy consumption. The USB stick is based on the RP2040...
Index: SBC-21666
Index: SBC-21666
Shipping in 24 hours
Available
Check quantity
Regular price €58.37 Price €58.37
  • New

StackyPi - module with RP2040 microSD card slot and Raspberry Pi GPIO - SB Components SKU24032

StackyPi is a compact and advanced board based on the Raspberry Pi RP2040 microcontroller. It is equipped with a 40-pin connector (2x 20-pin), compatible with the GPIO of the...
Index: SBC-21656
Index: SBC-21656
Shipping in 24 hours
Available
Check quantity
Regular price €15.17 Price €15.17
  • New

GatePi - RP2040 LoRa 868MHz module with relays - 4 channels - 250V/10A contacts - SB Compotnents SKU23240

GatePi is a low energy module, equipped with four relays with contacts 250 V AC / DC / 10 A , controlled by the Raspberry Pi RP2040 microcontroller. The module is...
Index: SBC-21659
Index: SBC-21659
Shipping in 24 hours
Available
Check quantity
Regular price €69.22 Price €69.22
  • New

PiSquare - module with RP2040 and ESP-12E for use with HATs - SB Components SKU24186

PiSquare is a board based on the Raspberry Pi RP2040 and ESP8266 EPS-12E microcontroller. The module has outputs compatible with Raspberry Pi minicomputers, so you can...
Index: SBC-21655
Index: SBC-21655
Shipping in 24 hours
Available
Check quantity
Regular price €21.03 Price €21.03
  • New

Sprite Extruder Pro - 300 st for Creality Ender-3, Ender-3 Pro, Ender-3 V2 3D printer

High-temperature version of the Sprite Pro extruder, designed for use in the following 3D printer models from the Ender series: Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 Max....
Index: CRL-21549
Index: CRL-21549
Shipping in 24 hours
Available
Check quantity
Regular price €121.30 Price €121.30
  • New

Micro Swiss - Direct Drive Extruder with engine for Creality CR-10 / Ender-3 series 3D Printers

A set of Direct Drive extruder elements with a stepper motor from Micro Swiss. The construction based on a bevel gear allows for a short filament feeding path (only 41 mm)....
Index: MIS-21692
Index: MIS-21692
Shipping in 24 hours
Available
Check quantity
Regular price €166.87 Price €166.87
  • New

3D printer - Creality Ender-3 S1 Plus

Version of the Creality Ender-3 S1 3D printer with an increased working area: 300 x 300 x 300 mm . The manufacturer used a proprietary, high-temperature Direct Drive "Sprite"...
Index: CRL-21652
Index: CRL-21652
Shipping in 24 hours
Available
Check quantity
Regular price €648.83 Price €648.83
  • New

Creality Resin Tool Kit for 3D printer

A set of tools necessary to work with resin 3D printers. The package includes a plastic spatula, brush, funnel made of stainless steel, silicone funnel, PVC gloves and a...
Index: CRL-21831
Index: CRL-21831
Shipping in 24 hours
Available
Check quantity
Regular price €15.19 Price €15.19
  • New