Raspberry Pi 5 GPIO extensions and HAT
Raspberry Pi PoE+ HAT - Power over Ethernet for Raspberry Pi 4B/3B+ - SC0468
Cap designed for Raspberry Pi 3B+ and 4B versions which are equipped with 4-pin PoE connector. It allows simultaneous communication with LAN and powering the minicomputer...Logic level bi-directional converter, 4-channel - SparkFun BOB-12009
The module allows to exchange data between systems that use the most popular voltages levels: 5 V and 3.3 V and 1.8 V and 2.8 V. Works in both directions simultaneously. It has...Raspberry Pi M.2 HAT+ for NVMe drives and M.2 accessories for Raspberry Pi 5
Raspberry Pi M.2 HAT+ allows you to connect M.2 peripherals, such as NVMe drives and AI accelerators, to the PCIe 2.0 interface on Raspberry Pi 5. It provides fast data...RTC module DS3231 I2C - real time clock
Module with real time clock, allows you to read the time in hours, minutes, and seconds, and to read the date: month, day, year. The device was based on the DS3231 system,...MCP23017 - I2C 16-channel output expander
The system allows to increase the number of pins (up to 16 ) of the microcontroller (including minicomputer of Raspberry Pi). It communicates with the central unit via the I2C...Pineboards HatDrive! Bottom - PCle adapter for NVMe 2230, 2242, 2280 for Raspberry Pi 5
HatDrive! BM1L (BOT) is a dedicated adapter that allows you to connect a full-size NVMe SSD to a Raspberry Pi 5 single-board computer. Designed with memory expansion in...- Reduced price
- Promotion
TV HAT tuner DVB-T - module with decoder for Raspberry Pi 4B/3B+/3B/Zero
Shield for Raspberry Pi which consists to the tuner of the terrestrial television. It enables the reception of all available, uncoded channels of digital terrestrial...- New
Breakout Pi Zero - prototype board for Raspberry Pi Zero
The board allows you to create your own electronic circuits . It is connected directly to GPIO pins of Raspberry Pi minicomputer. It has separate pins, in groups, as well...Pineboards HatDrive! Nano - NVMe 2230, 2242 adapter for Raspberry Pi 5
HatDrive! Nano is a dedicated adapter that allows you to connect an NVMe SSD drive to a Raspberry Pi 5 single-board computer. Designed with memory expansion in mind, it...MAX98357A decoder stereo DAC I2S - SparkFun DEV-14809
The stereo decoder's module DAC to communicate through the I2S interface. Built-in class D amplifier can provide up to 3.2 W of power to the speakers or headphones with...RPi Relay Board - 3 relays - cap for Raspberry Pi - Waveshare 11638
Cap fitted to connectors of Raspberry Pi GPIO in version 4B, 3B+, 3B, 2B, B+ and A+, with three relays with parameters of 250 V / 10 A. Board has a screw connector....4-channel logic level converter
The module allows to exchange data between systems that use the most popular levels of voltage: 5 V <-> 3.3 V and 3.3 V <-> 1,8 V. It works in both directions simulatneously....Logic level bi-directional converter, 4-channel - Pololu 2595
Miniature (13 x 10 mm). the module allows to exchange data between systems that use the most popular voltage levels ranging from 1.5 V to 18 V and Vice versa. Four channels to...LTE GPS HAT - NB-IoT / LTE / GPRS / GPS SIM7000E - for Raspberry Pi 3B+/3B/2B/Zero - Waveshare 14865
Shield for Raspberry Pi that allows you to send text messages in the GSM network. It also has a GPS and LTE module. It communicates via serial interface UART (RX, TX) using the...ProtoPi Plus Side - extension GPIO Raspberry Pi 4/3/2/B for breadboard + tape
The module allows you to connect the GPIO leads of the Raspberry Pi 4, 3, 2 and B plus minicomputer to popular 830-hole contact boards using the included 40-wire tape. The...Extension GPIO Raspberry 4B/3B+/3B/2B/B+ to the contact plate + tape + breadboard
This module allows to connect GPIO pins of Raspberry Pi 4B, 3B+, 3B, 2B and B+ versions to the PCB using 40 wires tape. The kit includes GPIO extension module, contact board...Extension GPIO Raspberry Pi 3/2/B+ to the contact plate + tape
The module allows connection of the GPIO leads of the minicomputer Raspberry Pi 3, 2 and B + to popular breadboards with 830 and 400 holes, using an attached to the set,...MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...Pineboards Hat AI! - Coral TPU PCIe M.2 E-key adapter for Raspberry Pi 5
Hat AI! is the perfect solution for users who want to leverage the artificial intelligence capabilities of Google Coral Edge TPU in their Raspberry Pi 5 -based projects....Module ProtoPi Plus - extension for Raspberry Pi 4/3/2/B + to breadboard + ribbon wire
The module provides easy connection of all GPIO leads of the Raspberry minicomputer, version 4, 3, 2 and B+ with any breadboard, no soldering needed.Pineboards HatDrive! Top - NVMe adapter 2230, 2242 for Raspberry Pi 5
HatDrive! TM1S (TOP) is a dedicated adapter that allows you to connect a full-size NVMe SSD to a Raspberry Pi 5 single-board computer. Designed with memory expansion in...