We offer various memory card accessories for PC and popular microcontrollers such as Raspberry Pi or Arduino. In this category you can find, among others, card readers (also with USB output for connecting to a PC), card slots (made in SMD technology) with possibility to solder to a microcontroller, slot extender or data logger, allowing you to record information on a memory card. Adapters from microSD to SD format are also available.
Memory cards accessories
Extension slot for memory cards microSD - 65cm
Extension slot for memory cards microSD, e.g. for Raspberry Pi with a tape with a length of 65 cm.MicroSD - SD card adapter with Raspberry Pi logo
Adapter to connect the microSD card to the SD input. Allows you to connect, for example, card with the operating system for the Raspberry to a PC desktop using an appropriate...MicroSD socket card extender - 15cm - 4pcs - Uctronics U6192
Adapter, microSD card slot extension that can be successfully used with Raspberry Pi minicomputers, 3D printers and other devices. It will work in all devices that require...Card reader - USB 2.0 + OTG - GoodRam
The memory card reader equipped with two interfaces: USB A plug to the computer, and microUSB OTG plug for tablets and smartphones with microUSB slot.Slot for micro SD memory card uSD589
Connector - slot for micro SD memory card with a flap.Odroid eMMC memory reader microSD - for updating software
eMMC Odroid reader module enables updates of the software through the microSD port.MicroSD Card Breakout - SB Components 22731
The microSD card reader module is a way to equip your project with memory, thanks to which it will be possible to store all data and multimedia . The module uses the SPI...SD/microSD card reader with USB 2.0 input - Goobay
Compact memory card reader in the form of a USB adapter . Supports SD, SDHC, SDXC, microSD and T-Flash cards (using a separate adapter). Compatible with Windows and macOS...MicroSD card reader module - Pololu 2597
Reader module of the microSD cards from the Pololu with goldpin connectors - 2.54 mm pitch for self-soldering. It communicates with main board via SPI interface, it operates...Atomic TF-Card Reader - micro SD card reader - expansion module for M5Atom - M5Stack A135
Atomic TF-Card Reader is a module designed to read and write TF (microSD) cards . It is compatible with Atom series controllers : Atom Matrix, Atom Lite, AtomS3 and AtomS3...SD/microSD card reader with USB 3.0 input - Goobay
Card reader in the form of a USB 3.0 adapter with 2 slots for reading microSD and SD memory cards . Supports SDXC, SDHC, microSD and SD cards with SuperSpeed speeds up to 5...Goobay 38656 - microSD memory card reader
Universal microSD card reader with USB 2.0 interface. Allows you to transfer data from card to computer. Supports all microSD cards up to 64 GB.Card reader AK242C microSD SDHC
Universal reader of memory microSD cards with USB 2.0 interface. It allows for the data transfer from cards to PC and laptop. It s upports microSD / T-Flash and microSDHC...MicroSD Card BFF Add-On - microSD slot board for QT Py and Xiao - Adafruit 5683
The MicroSD Card BFF Add-On from Adafruit is a proposal designed to be used with QT Py and Xiao boards to extend the design possibilities with additional memory for reading...Extension of the microSD card slot - 25cm
Extension of the slot for microSD cards, for example, in Raspberry Pi with a ribbon of length of 25 cm.SparkFun OpenLog Artemis - data logger - version without IMU - SparkFun DEV-19426
SparkFun OpenLog Artemis is an open source data logger . The module is pre- programmed to automatically record GPS data, UART serial data, and a wide range of pressure,...OpenLog - data logger - SparkFun DEV-13712
The device allows for easy data recording onto the memory microSD card up to 64 GB. Communication is via the serial interface (RX, TX).Extension of the microSD card slot - 48cm
Extension of a slot for microSD cards, for example, in Raspberry Pi, with a ribbon with a length of 48 cm.SD card reader module - SparkFun BOB-12941
Module of the SD MMC memory card reader from the SparkFun. It provides communication with the main board (e.g. Arduino or STM32Discovery).Data Logging - Shield for Arduino - Adafruit 1141
Shield for the Arduino that allows you to save data to the SD card. RTC built-in clock allows to save the exact time. The system communicates via I2C, works with plates Uno R3,...See also
Memory card accessories
We offer a variety of accessories for memory cards, such as slots, card readers (also with a USB interface, for example in the convenient form of a key ring) and components for mounting on minicomputers. Before choosing a particular model, it's worth checking whether it supports the desired card capacity (some devices are limited to 32GB or 64GB, for example).
PC accessories
In this section we offer many useful accessories for owners of laptops and desktop computers. If your equipment does not have a built-in slot for memory cards, you can easily change it by choosing a card reader which communicates with a computer via USB interface. A particularly recommendable option is a USB hub with a built-in reader, which also acts as a splitter and provides a slot for SD and microSD memory cards. We also offer microSD to SD card adapters, which are very useful for ripping data from a microSD card to a laptop or desktop computer equipped with an SD card slot.
Accessories for microcontrollers
Equipping your microcontroller with a module that enables you to read and/or write data to an SD or microSD card will greatly expand the capabilities of your minicontroller. We have a wide range of accessories to choose from - including SD and microSD card memory slots with surface mount solder joints, as well as extensions such as reader modules and data loggers. The components available in this category communicate with the board via popular interfaces (SPI, I2C), which makes them very universal. We also offer solutions useful in creating robotic projects or more advanced electronic devices, including SD and microSD card slot extenders.