Most electronic devices for correct functioning can be checked very quickly, as soon as all components are soldered and the power supply connected. The LEDs are on, the motors are spinning, the LCD display shows messages - it can be said that everything works as it should, according to the design assumptions. However, the question is - how to make the circuits of our device work correctly in everyday use without a risk of failure? Of course, it is worth ensuring adequate protection of the device against damage by mounting it in the eclosure. The same thing is with the Pi 4B - the latest single-board minicomputer of the Raspberry Pi series, as well as its predecessors. We offer a wide selection of housings with the necessary mounting elements. The enclosures available in the Botland store are varied in colour, profiling, and other important-to-note parameters. This way you can choose the proper enclosure for the Raspberry Pi, also taking into account the cooling system and the presence of additional hardware extensions.
- New
- New
iNode Control Point UART - programmable UART module - RFID system
Index: INO-09946
- On sale!
- Promotion
Distance sensor - wide-angle 3-channel - OPT3101 - Pololu 3412
Index: PLL-19104
- Reduced price
- Promotion
- On sale!
- Promotion
- On sale!
- Promotion
- On sale!
- Promotion
Raspberry Pi 4B power supply
Products: 14
Loading...
Power supply for Raspberry Pi 4 - USB C 5,1V / 3A - original white
Original , white power supply for the minicomputer Raspberry Pi 4 with USB-C connector . The maximum current efficiency is 3 A.
Index: RPI-14488
Index: RPI-14488
USB micro-B - USB-C - original adapter for Raspberry Pi 4 - black
Adapter enables connecting the power supply with a microUSB connector to the minicomputer Raspberry Pi 4. Module in black color.
Index: RPI-14661
Index: RPI-14661
Power supply Extreme USB 3.1 typ C + USB 5V/3,1A for Raspberry Pi 4B
Power supply with USB 3.1 type C cable and USB type A socket. Output voltage is 5 V, maximum current capacity is 3.1 A . The power supply is compatible with Raspberry...
Index: ZAS-07819
Index: ZAS-07819
Power supply Extreme USB 3.1 typ C 5V/3,1A
Power supply with cable USB 3.1 type C. The output voltage is 5 V, the maximum current efficiency is 3.1 A. The devide can power up the minicomputer Raspberry Pi 4B.
Index: ZAS-07820
Index: ZAS-07820
Power supply Argon40 USB type C 5.25V / 3.5A for Raspberry Pi 4B - black
The power supply is equipped with a USB type C plug and is compatible with the Raspberry Pi 4B minicomputer. It has parameters that allow for optimal power supply of the...
Index: ARG-20884
Index: ARG-20884
USB micro-B - USB-C - original adapter for Raspberry Pi 4- white
Adapter enables connecting the power supply with a microUSB connector to the minicomputer Raspberry Pi 4. Module in white color.
Index: RPI-14660
Index: RPI-14660
PoE HAT 5V 3A - powering over Ethernet for Raspberry Pi 4B/3B+ - Uctronics U6102
The overlay allows you to power the Raspberry Pi 4B and 3B+ mini-computer directly from the Ethernet port on the board. In addition, the cover plate is equipped with an...
Index: ACM-15752
Index: ACM-15752
Power over Ethernet HAT (B) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions . It provides both an 802.3af network connection and supplies...
Index: WSR-19592
Index: WSR-19592
Power supply for Raspberry Pi 4 - USB C 5,1V / 3A - original black
Original , black power supply for the minicomputer Raspberry Pi 4 with USB-C connector . The maximum current efficiency is 3 A.
Index: RPI-14348
Index: RPI-14348
Power supply justPi C USB 5V/3A for Raspberry Pi 4B
Dedicated power supply for the Raspberry Pi 4B minicomputer (1 GB, 2 GB and 4 GB RAM). It has parameters consistent with the recommendations of the Raspberry Pi foundation:...
Index: SHR-14516
Index: SHR-14516
Power supply justPi USB-C 5,1V / 3A for Raspberry Pi 4B
Switch mode power supply, dedicated for Raspberry Pi 4 minicomputer. It has appropriate parameters needed for optimal power supply of the device. Output voltage is 5.1 V and...
Index: ZAS-14878
Index: ZAS-14878
The Power over Ethernet HAT (C) is a module in the form of a HAT overlay that is designed for the Raspberry Pi. It is compatible with 3B+ and 4B versions of the minicomputer. It...
Index: WSR-18771
Index: WSR-18771
Pi PoE Switch HAT - Ethernet power supply for Raspberry Pi 4B/3B+/3B
Cap for Raspberry Pi that allows simultaneous power and connecting minicomputer with network. Module input voltage ranges from 36 V to 56 V. The output voltage is 5 V.
Index: SUP-09566
Index: SUP-09566
Power over Ethernet HAT (D) is an overlay module designed for Raspberry Pi minicomputer 3B+ and 4B versions. Small size and specially designed construction allows to use it also...
Index: WSR-19593
Index: WSR-19593
- EOL
Enclosures for Raspberry Pi 4B - reliable protection and attractive look...in a single enclosure!
For proper protection of Your Raspberry Pi 4B against damage and its use, that is easy and comfortable, you need to choose the enclosure properly for the additional equipment with which your minicomputer will work. Therefore, if you intend to use the Raspberry Pi 4B as a free-standing desktop computer with a keyboard, mouse and monitor, the best choice will be to buy a closed case that has holes for the micro SD card slot, power supply socket, USB, audio, Ethernet and HDMI ports. Such enclosure will also be a good choice for applications in which the computer is permanently mounted. Officially dedicated enclosure for the Raspberry Pi 4B in a closed-form is available in our store in white and red, as well as in black. The housing is made of solid ABS plastic. In the set, the user receives anti-slip rubber pads that ensure the stability of the housing and good adhesion to the surface. On the other hand, if you want to use the Raspberry Pi 4B as a platform for prototyping electronics, then the better choice will be an open housing. This version of the housing provides easy access to GPIO connector, as well as mounting the LCD module and other useful hardware extensions.
Can I install my Raspberry Pi 4B module in the enclosure for older models?
If you want to install your single-board computer in an enclosure, you must pay attention to the device's dimensions and how the connectors and other peripheral elements are arranged. Although the Raspberry Pi 4B has identical PCB dimensions as the models from the 1B, 2B and 3B series, there are differences in the arrangement of the connectors. From here you need to know that the housings for older Raspberry Pi models will not match the specifications of the Pi 4B model. Fortunately, you don't have to worry about this problem. We offer various types of enclosures dedicated to the Raspberry Pi model 4B. The enclosures have been computer designed and manufactured with the utmost care at finest details. The location of the holes is fully compatible with the location of the connectors on the Pi 4B PCB board, which makes mounting the module very easy. Enclosures for Raspberry Pi 4B are characterized by attractive design and provide reliable protection against mechanical and electrical damages. At the same time, please note that the housing for the Raspberry Pi 4B will not fit into the design of older models from the Raspberry Pi series.
Specialized enclosures for non-standard applications
Apart from standard plastic housings, In the Botland store offer, there are available housings equipped with a BLDC-powered fan and metal housings with specially profiled heat sinks for heat dissipation enhancement. This is a particularly interesting option if you are looking for an enclosure specifically for applications working in an environment where the temperature is higher than typical room temperature which is equal to 20°C. On the other hand, the enclosures with VESA mounting bracket with 75mm x 75mm mounting hole spacing, allow the Raspberry Pi 4B to be easily mounted on a wall or rear side of the TV cabinet. Each enclosure set we offer for Raspberry Pi 4B includes screws, latches and other necessary mounting elements.