Description
A set of sensors for Arduino and Raspberry Pi, consisting of 65 items. The kit includes, i.a.: sensor of temperature and humidity, soil humidity sensor, smoke sensor, the display, relay and much more. The whole is closed in the container.
The set consists of:
| L. p. | Photo | Description |
|---|---|---|
| 1 |  |
The joystick can be used, for example, in the project of the controller for games. |
| 2 |  |
The power module for the breadboard - 1 pc. Power module forbreadboard, it allows for connection of power supply of 5 V or 3.3 V using the AC adapter. |
| 3 |  |
Module with passive buzzerem - 1 pc. Buzzer without generator of continuous tone. It allows you to add sound alarm. |
| 4 |  |
Module with active buzzer - 1 PC. Buzzer with continuous tone generator. It allows you to add sound alarm. In active buzzer, it is sufficient to specify active low state on its leg to make it make a sound. |
| 5 |  |
The sound sensor - large. The detector with a potentiometer, changing the state when exceeding a certain level. |
| 6 |  |
The sound sensor - small. The detector with a potentiometer, changing the state when exceeding a certain level. |
| 7 |  |
Module with sensor to track the line. The module can be used in the design of the robot following the line. |
| 8 |  |
The reflecting sensor. Sensor to detect obstacles. The distance range is adjusted using the potentiometer. |
| 9 |  |
The sensor can detect movement. Object detection is signalled by a digital - high state. |
| 10 |  |
The flame sensor. The sensor used to detect fire. Detection sensitivity is adjustable via potentiometer. |
| 11 |  |
The Hall Sensor. Sensor to detect the magnetic field. |
| 12 |  |
The touch sensor. The sensor detects the touch of the human body. |
| 13 |  |
Temperature sensor. Digital temperature sensor based on thermistor. |
| 14 |  |
Module with capacitive touch. Temperature sensors. When the temperature increases, the resistance decreases. |
| 15 |  |
Module with LED RGB. LED emitting colors from a palette of RGB colors. |
| 16 |  |
Module with LED SMD RGB. LED emitting colors from a paletteof RGB colors. |
| 17 |  |
LED 5 mm, bicolor: red / green. The LED that emits green or red. |
| 18 | |
LED 3mm, bicolor: red / green. The LED that emits green or red. |
| 19 |  |
Relay of 5 V. Single-channel relay with coil with voltage of 5 V. |
| 20 |  |
The module with the reed switch. Magnetic sensor is used, for example, to determine the position of doors or windows. |
| 21 |  |
LED - red - 5 PCs. LED emitting light in red. |
| 22 |  |
LED - green - 5 PCs. The LED that emits light in green color. |
| 23 |  |
LED - blue - 5 PCs The LED that emits light in blue. |
| 24 |  |
LCD display. LCD display with 16x2 characters. |
| 25 |  |
Resistor 10 Ω- 10 PCs. Passive electricelement, used to limit the current of an electric circuit. |
| 26 | |
Resistor100Ω - 10 PCs. Passive electricelement, it is used to limit the current of an electric circuit. |
| 27 | |
Resistor220Ω - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 28 | |
Resistor330Ω - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 29 | |
Resistor1 kΩ - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 30 | |
Resistor2kΩ - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 31 | |
Resistorof 5.1kΩ - 10 PCs. |
| 32 | |
Resistor10kΩ - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 33 | |
Resistor100kΩ - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 34 | |
Resistor1 MΩ - 10 PCs. Passive electric element, it is used to limit the current of an electric circuit. |
| 35 |  |
Legend card of colors of resistor - 1 PC. Map to facilitate the distinction of the resistances of the resistors based on the colored strips on their body. |
| 36 |  |
The soil moisture sensor. The sensor serves to determine the moisture level of the soil. |
| 37 |  |
Sensor of the heart rate. The sensor used to measure heart rate. |
| 38 |  |
Seven-colored LED. Blinking, seven-colored LED. |
| 39 |  |
The laser module. The laser emits a beam of light. |
| 40 |  |
The module with Tackt Switch. |
| 41 |  |
The vibration sensor. |
| 42 |  |
Module with rotary potentiometer. |
| 43 |  |
SD card reader. |
| 44 |  |
Distance sensor HC-SR04. Ultrasonic sensor operating in the range from 2 cm to 200 cm. |
| 45 |  |
Smoke sensor MQ-2. The sensor determines the concentration of the CO. |
| 46 |  |
A tilt sensor. Closes the circuit when the ball touches the wall. |
| 47 |  |
The DHT11 sensor. The sensor of humidity and temperature. |
| 48 |  |
The Hall Sensor. Analog sensor to detect a magnetic field. |
| 49 |  |
The module of RTC. Module with chip of RTC. |
| 50 |  |
The Hall Sensor. The sensor that provides detection of a magnetic field. |
| 51 |  |
Temperature sensor DS18B20. A popular temperature sensor. |
| 52 |  |
The touchand slit sensor. |
| 53 |  |
The liquid level sensor. A sensor for measuring the liquid level in the vessel. |
| 54 |  |
Radio transmitter and receiver. Module ofradio transmitter and receiver working with frequency of 433MHz. |
| 55 |  |
Analog temperature sensor. The temperature sensor uses a thermistor to measure. |
| 56 |  |
Step-down converter. Converter step-down MP1584en with an output voltage from 0.8 V to 20 V and input voltagefrom 4.5 V to 28 V. |
| 57 |  |
Module MPU-6050. 3-axis accelerometer and gyroscope I2C. |
| 58 |  |
The NRF24L01 module. A radio module (transmitter and receiver) of 2.4 GHz. |
| 59 |  |
Converter of I2C logic levels. |
| 60 |  |
Bluetooth module HC-06. |
| 61 |  |
Transmitting IR LED. |
| 62 |  |
The IR receiver. |
| 63 |  |
Keyboard 4 x 4. |
| 64 |  |
Module with photoresistor. |
| 65 |  |
CD-ROM with examples of programmes for Arduino and documentations. |
| 66 |  |
Plastic container. |
Advantages
- Comprehensive set with 65 different sensors and modules.
- Compatible with both Arduino and Raspberry Pi.
- Includes a variety of sensors such as temperature, humidity, soil moisture, smoke, and more.
- Comes with a container for organized storage.
- Positive reviews highlighting the quality and educational value.
- Fast delivery as mentioned in the reviews.
Disadvantages
- The box provided is too small for all the items, leading to poor organization.
AI generated based on user reviews
