Description of product: Devil Design+ ABS 1.75 mm 1 kg Black
Filament ABS+ Devil Design is made of thermoplastic plastic in the form of fibers, used as a cartridge for 3D-printers and printing pens that print in FFF method. The filaments is wound on a reel and vacuum packed with a desiccant.
In our offer of filaments you will also find other materials and colors.
A reel contains 1 kg net of filament. It can be used in all FFF printers unprotected from using material obtained from an external supplier, as well as the structure of a "open source" type. ABS+ can be easily processed by grinding or drilling, the material dissolves in acetone.
Properties of ABS
- When printing it released a smell of melted plastic
- More resistant than PLA
- Melting point: from 180 °C to 220 °C. Very important is the selection of the appropriate temperature specified by the manufacturer
- Easy to sand, no problem to drill holes
- Cheap and available in several color options
Recommended settings for filament print
| The temperature of the head | 230-240 °C |
| The temperature of the table | 90-100 °C |
| Cooling of the print | Not recommended |
|
Because of the differences in the design of printers, the data above should be considered as a guide and the appropriate values should be determined experimentally. |
Specifications and physical properties of filament Devil Design ABS+
| Option | Range |
|---|---|
| Diameter of filament | 1.75 mm / 2.85 mm |
| Dimensional tolerance of filament | +/- 0.05 mm |
| Roundness of filament | +/- 0.02 mm |
| The surface of the material | Shine |
| The shrinkage of the material | Large |
| Weight | 1.0 kg net, gross 1.36 kg |
| Material | ABS |
| The weight of an empty reel | ~250 g |
| The diameter of the reel | 200 mm |
| Reel width | ~70 mm |
| Hole diameter for installation | 52 mm |
| Packaging | Cardboard box with a print |
| Package dimensions | 205 x 205 x 80 mm |
| Vacuum packing | Yes |
| Desiccant | Yes |
Useful links |
