Odroid modules are available from 2016. These minicomputers are manufactured by Hardkernel from South Korea and have gained very good opinions among electronic device designers. Odroid minicomputers are compared to today's most popular platforms, such as Raspberry Pi or Arduino. If you are planning to build a new device, check Odroid products, because the functionalities of these modules are very interesting. We recommend Hardkernel minicomputers especially if you need a very high performance module. In our store you will find many Odroid models for various applications. You can also choose a dedicated enclosures for them, as well as other accessories. In the Botland store, we offer power modules for Odroid minicomputers, LCD screens, keyboards and modules providing communication interfaces or fans. You can find here order additional memory cards for the Odroid minicomputer - primarily eMMC modules and microSD cards.
Odroid
Loading...
WiFi network adapter N 150Mbps with antenna
Wireless network adapter, compatible with 802.11 b/g/n, Works with Raspberry Pi 3/2/B+, no need to install drivers for the operating system Raspbian.
Index: RPI-04750
Index: RPI-04750
Odroid C4 - Amlogic S905X3 Quad-Core 2,0GHz + 4GB RAM
Odroid single disc computer in C4 version equipped with SoC Amlogic S905X3 quad-core with 2.0 GHz Cortex-A55 processor. The board has 4 GB of DDR4 RAM memory, on the board...
Index: ODR-16680
Index: ODR-16680
SATA data and power cable for Odroid H2/H3/H4
A set containing SATA cables for the complete connection of an HDD / SDD to a Odroid H2 / H3 / H4 chassis with the possibility of installing the drive. Includes SATA power cord...
Index: ODR-15152
Index: ODR-15152
Odroid eMMC memory reader microSD - for updating software
eMMC Odroid reader module enables updates of the software through the microSD port.
Index: ODR-10847
Index: ODR-10847
Power supply 15V/4A - plug 5,5/2,1mm for Odroid H2
Switch-over power supply with 5.5 / 2.1 mm plug with 15 V supply voltage and 4 A current capacity, recommended to power a Odroid H2 minicomputer. It has a detachable European...
Index: ODR-14755
Index: ODR-14755
Heat sink with fan for Odroid XU-4 - blue
Blue heatsink with fan and thermoconductive paste for minicomputer Odroid XU4. The supply voltage of the fan is 5 V / 120 mA.
Index: ODR-13636
Index: ODR-13636
Fan 12V 80x80x10,8mm - 2 wires
Fan size 80 x 80 x 10.8 mm . It is powered by 12 V , draws up to 0.18 A current. Its rotational speed is 1600 rpm , provides an airflow of 11.2 CFM, operates at a volume...
Index: ODR-17196
Index: ODR-17196
Odroid N2+ - Amlogic S922X Cortex A73+A53 Hexa-Core 2,4GHz+2GHz + 4GB RAM
Odroid N2+ minicomputer equipped with Amlogic S922X processor with four 2.4 GHz Cortex-A73 cores and two 2 GHz Cortex-A53 cores and Mali-G52 GPU. It has 4 GB of RAM and...
Index: ODR-17195
Index: ODR-17195
WiFi 2,4/5,8GHz and Bluetooth 4.2 USB module - Odroid 5BK
Module allowing wireless communication WiFi 2.4 GHz / 5.8 GHz in the 802 . 11 b / g / n / ac standard and Bluetooth 4.2 . It works with a series of Odroid modules...
Index: ODR-19557
Index: ODR-19557
Complete case for minicomputer Odroid in XU4 version with external dimensions 90 x 63 x 27 mm. It gives access to all connectors and provides adequate cooling.
Index: ODR-09882
Index: ODR-09882
- On sale!
- Promotion
The casing dedicated for Odroid C4 minicomputer in black made of plastic, the casing has special ventilation holes to maintain optimal air flow. Using a dedicated casing will...
Index: ODR-16810
Index: ODR-16810
Elegant and functional case for Odroid M1 coming directly from the manufacturer of the minicomputer. The housing body is made of metal , and the front and back panels are...
Index: ODR-21446
Index: ODR-21446
Aesthetic, strong and durable housing for Odroid N2 / N2+ minicomputer in black. It protects the device against dust and damage.
Index: ODR-14417
Index: ODR-14417
The memory module 16 GB eMMC with Linux operating system for the Odroid N2
eMMC memory with pre-installed Linux for the Odroid N2 mini-computer. Equipped with eMMC interface with 8-bit DDR mode. The pre-installed system allows you to work with the...
Index: ODR-16159
Index: ODR-16159
Case for Odroid Xu4 - transparent
Complete case for minicomputer Odroid in XU4 version with external dimensions 90 x 63 x 27 mm. It gives access to all connectors and provides adequate cooling.
Index: ODR-09881
Index: ODR-09881
- On sale!
- Promotion
Odroid H3+ - Intel N6005 Quad-Core 3,3GHz
The Odroid H3+ single-board computer is based on the quad -core Intel Pentium Jasper Lake N6005 processor clocked at 2 GHz (up to 3.3 GHz in boost mode) with 1.5 MB L2...
Index: ODR-22226
Index: ODR-22226
16 GB eMMC memory module with Linux for Odroid C4
eMMC memory designed to work with Odroid C4 minicomputer. Module is equipped with preinstalled Linux system. On board there is HS400 interface with DDR 8-bit mode....
Index: ODR-19054
Index: ODR-19054
The memory module 16GB eMMC Android for Odroid N2
Android pre-installed eMMC memory for Odroid N2 mini-computer. It has an eMMC interface with 8-bit DDR mode. The installed system allows you to work with the device right...
Index: ODR-16163
Index: ODR-16163
Odroid HC4 - Amlogic S905X3 Quad-Core 1,8GHz + 4GB RAM
The Odroid HC4 minicomputer is based on the same processor as Odroid C4 - Amlogic S905X3 Quad-Core with ARM Cortex A55 core at 1.8 GHz. The device is equipped with 4 GB of...
Index: ODR-18431
Index: ODR-18431
Transparent casing for the Odroid N2 / N2+ minicomputer for an aesthetic appearance and protection against dust and damage. Made of durable plastic.
Index: ODR-14416
Index: ODR-14416
Odroid N2+ - Amlogic S922X Cortex A73+A53 Hexa-Core 2,4GHz+2GHz + 2GB RAM
Odroid minicomputer in N2+ version with Amlogic S922X processor and four Cortex-A73 cores at 2.4 GHz and two Cortex-A53 cores at 2 GHz. It has 2 GB of RAM , microSD card...
Index: ODR-17191
Index: ODR-17191
Power supply 19V/7A - DC 5,5x2,1mm - for Odroid H3
Switching power supply with a DC 5.5 x 2.1 mm plug, designed for the Odroid H3 or Odroid H3+ minicomputer. The output of the power supply supplies a voltage of 19 V , and...
Index: ODR-22455
Index: ODR-22455
The memory module eMMC 32GB Android for Odroid N2
eMMC memory module with previously installed Android for Odroid N2 minicomputer. Equipped with eMMC interface with 8-bit DDR mode. Installed system allows you to work with...
Index: ODR-16165
Index: ODR-16165
Odroid M1 - minicomputer with Rockchip RK3568B2 processor + 8 GB RAM
Odroid M1 is a single board minicomputer equipped with a wide range of interfaces. The brain of the board is the Cortex-A55 quad-core processor (with low energy consumption...
Index: ODR-21426
Index: ODR-21426
See also
Large selection of Odroid modules in the Botland store
In our offer you will find four main versions of Odroid minicomputers. These are the models: Odroid C0, C1 +, C2 and Odroid XU4. They are based on Amlogic S805 (first two), Amlogic S905 (Odroid C2) and Samsung Exynos5422 (Odroid XU4) processors, respectively. As for the cores: next to the popular 64-bit 1,5GHz Quad-Core ARM Cortex-A53, we will also find a much more powerful octa-core combo processor, including quad-core 2 GHz ARM Cortex-A15 and quad-core 1,4 GHz ARM Cortex A7. Odroid minicomputers work under control of operating systems: Linux (Ubuntu) and well-known Android. RAM memories used in various Odroid modules are at least 1 GB capacity, but can achieve as large size as 4 GB. They also use external non-volatile memory, such as a microSD card, UHS1 memory card (up to 64 GB) and eMMC4.5 or eMMC5.0. Odroid modules from this series have many interfaces, depending on the specific model. Most of them have several USB sockets (mainly USB 2.0) and single microUSB sockets. Serial interfaces such as UART, I2C, or SPI, as well as GPIO and bulit-in analog-to-digital converters are also available. The Odroid minicomputers offer also includes an interesting Odroid Go Advance set with a Rockchip RK3326 processor. It is designed to build your own gaming console. The finished console resembles legendary consoles that were popular in the 90s.
Accessories for Odroid minicomputers
In the Botland store you will find a lot of accessories for Odroid modules. Thanks to them you can create advanced devices with a modern interface. The range of accessories available includes, among others, a touch screen dedicated to Odroid C1 +, Odroid C2 and Odroid XU4 modules. The screen connects to the minicomputer via HDMI. You can also order small LCD displays for controlling less demanding devices. Use heat sinks and fans to efficiently cool the minicomputer. These modules are dedicated to specific Odroid models. The range of accessories also includes USB 3.0 modules for connecting a SATA hard disk and for transferring data to the eMMC internal memory. Also use the dedicated network cards for Odroid. The range of accessories also includes all necessary cables: power, HDMI or SATA. You can also buy compatible connector sets from us.
Cases, adapters and memory cards for Odroid
Designers of electronic devices are concerned about overheating of components in minicomputers. That is why we have included in our store an offer of dedicated housings for Odroid. Compatible enclosures provide effective cooling for components dissipating the most of power. In addition, they protect Odroid minicomputers against dirt and mechanical damage. You have access to all connectors through holes in the housing. To power your device with Odroid use compatible power supplies with Jack plugs, as well as power cords and USB power adapters. In our offer you will find dedicated modules for power control. In the store you will also find dedicated eMMC memory modules with pre-installed operating systems.